File Copy and Archive Performance

The one area where the i-RAM truly offered impressive performance was when copying files on the i-RAM itself, mainly because a file copy is mostly an I/O bound process.

300MB File Copy
Time in Seconds (Lower is Better)
Gigabyte i-RAM (4GB)
25.25s
Western Digital Raptor (74GB)
77.689s

Copying a 300MB folder containing the Firefox source code from the Raptor to itself took about 77 seconds, yielding just under 4MB/s. Doing the same on the i-RAM took about 25 seconds, resulting in an average transfer rate of about 12MB/s. Note that both the Raptor and the i-RAM were far from their peak theoretical transfer rates, indicating that even the i-RAM is susceptible to some sort of performance overhead.

Next up? Copying a 693MB iso from the drive to itself:

693MB File Copy
Time in Seconds (Lower is Better)
Gigabyte i-RAM (4GB)
6.922s
Western Digital Raptor (74GB)
26.304s

The i-RAM averaged around 100MB/s and copied the file in 6.922 seconds. The Raptor did so in 26.305 seconds at an average of 26.3MB/s.

Finally, we copied our 1.7GB Battlefield 2 install directory:

1.76GB File Copy
Time in Seconds (Lower is Better)
Gigabyte i-RAM (4GB)
31.719s
Western Digital Raptor (74GB)
95.953s

Archive operations are also a lot quicker on the i-RAM. Here's how long it took to create a RAR archive of our Firefox source folder:

WinRAR Archive Creation
Time in Seconds (Lower is Better)
Gigabyte i-RAM (4GB)
57s
Western Digital Raptor (74GB)
70s

Un-archiving a 382MB RAR set provided a much closer competition between the Raptor and the i-RAM:

WinRAR Archive Extraction
Time in Seconds (Lower is Better)
Gigabyte i-RAM (4GB)
15s
Western Digital Raptor (74GB)
19s

i-RAM for Applications Overall Performance
Comments Locked

133 Comments

View All Comments

  • mattsaccount - Monday, July 25, 2005 - link

    This thing would still be useful as a pagefile in some circumstances--if all your memory slots were full and/or you had extra memory lying around. This is what I had been planning to do with it (currently have 4x512mb, plus a couple other smaller capacity DDR sticks which would be nice to use b/c for photoshop stuff). But the price is too high. I'll wait till it drops.
  • Son of a N00b - Monday, July 25, 2005 - link

    I would love to get two of them and run them in RAID-5 possibly...that way you also have a back up...

  • Gatak - Monday, July 25, 2005 - link

    You'd need minimum 3 cards/disks for RAID-5.

    However, using this card as a journaling device for a normal filesystem, like ReiserFS or Reiser4 might be very beneficial. Wouldn't require much RAM either.
  • ukDave - Monday, July 25, 2005 - link

    Extra things that could have been covered were:

    Would there be a difference with other SATA cards, such as 3Ware etc - i.e. would CPU usage make a difference perhaps?
    Why not use SATA-IO (SATA-2) instead of the older and slower SATA (re: Gigabyte)?

    But otherwise a very informative article, thanks Anand.
  • ss284 - Monday, July 25, 2005 - link

    It would be best to wait for the second version of the card, which will hopefully have a cheaper IC as well as sata II support. Theres no doubt that the ram can do 3.0gb/s.

    Imagine what 2 of these in raid 0 would be like.


    -Steve
  • SDA - Monday, July 25, 2005 - link

    - File copy performance is mostly a moot point, because copying files from disk to disk will go as fast as the slower of the two can, and other applications that typically require disk performance (unarchiving et al) will only see a minimal performance increase due to bottlenecks in other parts of the system (which becomes even less valuable when you consider that you won't be doing a whole lot of unarchiving to a disk that small).

    - Gaming benefit would be okay if it you could fit more than about one modern game on it.

    - Using it as a pagefile is, as Anand noted, pointless.

    - It does improve boot times, but it's not a huge difference, how many of us shut down often enough to actually be bothered by a few seconds in boot?

    - It does improve app loading times slightly, but if you're opening and closing apps that take a lot to open and close, it's probably because you don't have enough system memory, so buy more memory instead.

    So basically: whoopee.
  • DerekWilson - Wednesday, July 27, 2005 - link

    I'm just gonna pick at a single point ... you could install one game to the i-ram at a time and then archive them on another drive.

    You get fast zip times on i-ram and a single file transfer to a magnetic disk is faster than multiple small files (moving the the archive won't take long). Just unzip the game you want to play to i-ram ...

    but then ... that kinda defeats the purpose doesn't it ...

    I could see this being fun to play with, but I have to agree with Anand -- it needs higher capacity before it is really useful.

    Plus, I'd like to see SATA-II :-)
  • miketheidiot - Monday, July 25, 2005 - link

    I don't really see anyone using this, its costs way too much for too little storage and too little performance benefit, not to mention the risk of data loss. I'll give it a look again when they get some higher bandwidth flash or something like that. this i can pass on for now.
  • Sea Shadow - Monday, July 25, 2005 - link

    I dunno, I could see the extreme enthusiasts getting these. I mean after all, if they have the money to buy a system with SLI 7800 GTX and FX 57 this would be pocket change.
  • BoberFett - Monday, July 25, 2005 - link

    I'd imagine that in some areas the CPU is still the bottleneck and for others the 150MB/sec limit of SATA may be.

Log in

Don't have an account? Sign up now