Test Setup

 Performance Test Configuration
Processor(s): AMD Athlon 64 4000+ (2.4GHz) Socket 939
RAM: 2 x 512MB OCZ PC3200 Platinum Rev. 2
Hard Drive(s): Seagate 120GB 7200 RPM SATA (8MB Buffer)
Video AGP & IDE Bus Master Drivers: NVIDIA nForce 6.56
Video Cards: NVIDIA 6800 Ultra (PCIe)
NVIDIA 6800 Ultra (AGP)
Video Drivers: NVIDIA nForce 77.72
Operating System(s): Windows XP Professional SP2
Direct X 9.0c
Motherboards: ULi AP9567A (M1695/M1567)
Abit AN8 Fatal1ty
Biostar NF4UL-A9
Chaintech VNF4-Ultra
DFI LANParty UT nF4 Ultra-D
ECS KN1 Extreme
Epox 9NPA+ Ultra
Winfast NF4UK8AA (Foxconn)

Tests used OCZ PC3200 Platinum Rev. 2, which uses Samsung TCCD chips. All memory ran at 2-2-2-10 timing in all benchmarks.

The NVIDIA 6800 Ultra was used for testing both PCIe and AGP performance on the ULi and Biostar boards. The 6800 Ultra video cards were tested at the same video timings and differed only in interface - AGP or PCIe. Resolution in all benchmarks is 1280x1024x32 unless noted otherwise.

Results for the ULi M1695/M1567 are color-coded red for PCIe and Orange for AGP in all graphs. Results for the other seven boards, all based on the nForce4 Ultra chipset, are in blue.

tRAS and Memory Stress Testing General Performance & Encoding
Comments Locked

72 Comments

View All Comments

  • Zebo - Wednesday, July 13, 2005 - link

    Thanks Wes but why no disk, USB, or network performance comparisons?

    This board(s) is DOA IMO..

    Crap realtek audio and no video don't even let it enter the bargian market unlike ATI will do.

    second Uli is a nobody in our market like SiS and won't get any serious attention from the likes of ASUS/ABIT/DFI/Gigabyte performance works.




  • kmmatney - Wednesday, July 13, 2005 - link

    Woohoo! Just what I needed so I can keep my video card (6600GT) while upgrading from my Athlon XP. Waht we NEED though, is a Palermo for Socket 939.
  • JustAnAverageGuy - Wednesday, July 13, 2005 - link

    </didn't read the first paragraph on the last page>

    :blush;

    Any guesses on which manufacturers will be using the chipsets then? Asus, Abit, MSI, etc?
  • JustAnAverageGuy - Wednesday, July 13, 2005 - link

    Any idea on when the chipset will be available in retail markets?

    That is VERY impressive. :thumbsup; ULi
  • Cookie Crusher - Wednesday, July 13, 2005 - link

    Three words: I want one.

    Ok, some more words: This board is what I think many people have been clamouring for since early this year. A true bridge board that allows all of us average people to make the switch with the maximum amount of flexibility is what we've wanted.

    The fact that it performs well is gravy. For all of us who jumped in on socket 754 early on and have waited to switch to socket 939 (and necessarily pci-e) this now let's us make the move without gouging our wallets.
  • ocyl - Wednesday, July 13, 2005 - link

    Driver support? Linux?
  • Zepper - Wednesday, July 13, 2005 - link

    ocworkbench has had several articles on this chipset. Check that out too.

    .bh.
  • Furen - Wednesday, July 13, 2005 - link

    #4: Hell yeah, now we just need for someone to actually make these...
  • ryanv12 - Wednesday, July 13, 2005 - link

    whoa! I didn't know we were getting these boards! And here I was, about to upgrade to a PCI-E board, reluctantly. I think I'll just do Dual-Core and pick up this motherboard and drop in a GTX later. I have a 6800GT that's still pretty competent :)
  • Shinei - Wednesday, July 13, 2005 - link

    The only thing I care about is PRICE. If these suckers roll out for $80-$100 cheaper than the nForce4 SLI boards, guess where my money's going... And I'm taking my 6800GT with me! :)

Log in

Don't have an account? Sign up now