Discrete GPU Gaming Tests

1080p Max with RTX 2080 Ti

The last generation flagship GPU might be considered a bit overkill for 1080p gaming, however when we start cranking up settings, we end up crossing the realm from high refresh rate gaming down to regular gaming, and the CPU can end up being the bottleneck here. It provides an interesting set of results.

A full list of results at various resolutions and settings can be found in our Benchmark Database.

(a-4) Chernobylite - 1080p Max - Average FPS

Generation on generation, we're getting a small bump in Chernobylite.

(b-7) Civilization VI - 1080p Max - Average FPS(b-8) Civilization VI - 1080p Max - 95th Percentile

One of the critical elements here is that Civilization 6 likes the Zen 3 cores, but only when there's enough L3 cache to go around.

(c-7) Deus Ex MD - 1080p Max - Average FPS(c-8) Deus Ex MD - 1080p Max - 95th Percentile

Deus Ex gets a sizeable uplift with the new APUs over the previous generation.

(d-4) Final Fantasy 14 - 1080p Max - Average FPS

144 Hz on Final Fantasy 14, these chips are ready.

(h-7) F1 2019 - 1080p Ultra - Average FPS(h-8) F1 2019 - 1080p Ultra - 95th Percentile

F1 2019 is a game that enjoys the Zen 3 change as well.

(i-7) Far Cry 5 - 1080p Ultra - Average FPS(i-8) Far Cry 5 - 1080p Ultra - 95th Percentile

(l-7) Red Dead 2 - 1080p Max - Average FPS(l-8) Red Dead 2 - 1080p Max - 95th Percentile

CPU Tests: Synthetic and SPEC Discrete GPU Gaming Tests: 4K with RTX 2080 Ti
Comments Locked

135 Comments

View All Comments

  • Dribble - Friday, August 6, 2021 - link

    Might be because it isn't as power limited and hence won't throttle in the same way the AMD chip.
  • Danvelopment - Thursday, August 5, 2021 - link

    Is the 5600G 6 core or 8 core? The first page of the article says it's both on the two tables.
  • eastcoast_pete - Thursday, August 5, 2021 - link

    Now, imagine if those 5700 APUs would have kept the core numbers of the 3400, but clocked at current speeds. I hope that Intel will bring its 10 nm Desktop CPUs with the full Xe compliment of mobile Tiger Lake, as that might force AMD to up its game; well, the next APU generation will be RDNA2, so as long as AMD doesn't gimp it by keeping the GPU tiny, it should have significant uplift over Cézanne
  • Cooe - Friday, August 6, 2021 - link

    Far Cry 5 running at ≈25fps on average at "1080p Ultra" is actually CRAZY freaking impressive. Why? Because that means it should hit a solid >=30fps running at "1080p High", which basically means that this single chip APU solution is outperforming BOTH of the last generation console base models (aka PS4 & Xbox One/S) in this title!!! That's freaking NUTS!!!
  • nandnandnand - Tuesday, August 10, 2021 - link

    I wouldn't be surprised to see 1080p60 in the same scenarios with Rembrandt next year. But DDR5 will be expensive.
  • nanonan - Friday, August 6, 2021 - link

    Every other source I've read states the pcie configuration as 24 lanes divided into 16, 4 and 4 just like the 4000G series. Do you have a source for this 8+4+8 configuration?
  • linuxgeex - Friday, August 6, 2021 - link

    Anand wasn't perfect with proofing either but he was thorough on deep dives, exposing bottlenecks and explaining how and why it was relevant. These days Ian and co assume that if we're Anandtech readers we just trust their methodology and do some lip service by adding cut&paste boilerplate around specs and throw in an image sometimes from a past review, sometimes not directly relevant, and I get that they only have so much time to invest. It bores me, and it doesn't give the new people the same level of engagement that will built their future audience. Oh welles.
  • Samus - Friday, August 6, 2021 - link

    I blacked out after getting to the part where an entry-level AMD APU starts at $259.

    While I get yes there are the Athlon's, they are mostly outclassed by a 9th gen $90 Intel Core i3 so it isn't even worth consideration.
  • GeoffreyA - Saturday, August 7, 2021 - link

    Yes, pricing is disappointing.
  • mode_13h - Sunday, August 8, 2021 - link

    They're starting strong, because it's a lot easier to lower prices than raise them, and that pricing reflects the supply/demand situation, especially when the 3000-gen are still widely available.

    Over time, I'm sure you can expect to see the gap close, particularly since the process node is the same and die sizes are similar.

Log in

Don't have an account? Sign up now