Performance Test Configuration

All seven Value RAM memories were tested on the DFI LANParty nF4 SLI-DR used in our most recent memory reviews. nForce4 is PCI Express, so we used the PCIe version of our standard nVidia 6800 Ultra for testing. Other components remain the same as used in the memory setup in Athlon 64 Memory: Rewriting the Rules. Performance was compared to the 5 top performing memories tested on this same platform in OCZ VX Revisited: DDR Updates on DFI nForce4 and Patriot DDR400 2-2-2/DDR533 3-4-4: Performance AND Value.

The A64 test bed includes components that have been proven in Socket 939 Athlon 64 benchmarking, such as the Socket 939 4000+ (same specifications as FX53), and the OCZ Power Stream 520 Power Supply. Since the Athlon 64 tests represent a new series of DDR testing, we are using the current generation nVidia 6800 Ultra video card for benchmarking. We have found the 6800 Ultra to be a particularly good performance match to nVidia motherboards.

All other basic test conditions attempted to mirror those used in our earlier Intel memory reviews. However, test results are not directly comparable to tests performed on the Intel test bed.

 AMD nForce4 Performance Test Configuration
Processor(s): AMD 4000+ (FX53) Athlon 64
(2.4GHz, Socket 939, 1 MB cache, Dual Channel, 1000HT)
RAM: Kingston KVR400X64C25/512 (DS) 2X512MB
Kingston KVR400X64C3AK2/1G (DS) 2X512MB
Mushkin PC3200 EM (DS) 2X512MB
OCZ PC3200 Value Series (VX) (DS) 2X512MB
OCZ PC3200 Gold (BH5) (DS) 2X512MB
OCZ PC3200 Premier (DS) 2X512MB
Transcend JM366D643A-50 (DS) 2X512MB

Patriot PC3200+XLBT (DS) 2X512MB
OCZ EL PC4000 VX Gold (DS) 2X512MB
Corsair TwinX1024-4400C25 (DS) 2X512MB
Crucial Ballistix (DS) 2X512MB
OCZ PC3200 Platinum Rev 2 (DS) 2X512MB
Hard Drives: Seagate 120GB SATA 7200RPM 8MB Cache
PCI/AGP Speed: Fixed at 33/66
Bus Master Drivers: nVidia nForce Platform Driver 6.39
Video Card(s): nVidia 6800 Ultra 256MB PCIe, 256MB aperture, 1024x768x32
Video Drivers: nVidia Forceware 71.84 Release
Power Supply: OCZ Power Stream 520W
Operating System(s): Windows XP Professional SP1
Motherboard: DFI LANParty nF4 SLI-DR
BIOS: 3/10/2005 Release

In past benchmarking, we have found performance of the nForce4 and nForce3 chipsets to be virtually identical, and we have found AGP and PCIe performance to be virtually the same in the benchmarks that we use for memory testing. Therefore, you can also compare these results to TCCD benchmarks in recent memory reviews. The differences in results are that the nVidia 71.84 driver is a bit faster than the 61.77 used in earlier memory review. The DFI nForce4 platform is also a bit better at memory overclocking than the MSI K8N Neo2 used in past memory testing. The performance differences, however, are not large enough to negate performance comparisons.

With nForce3 motherboards, we achieved the fastest performance on AMD Athlon 64 chipsets (nForce3, VIA K8T800 PRO) at Cycle Time or tRAS of 10. However, the nForce4 appears to behave a bit differently with memory. Therefore, we ran a complete set of Memtest86 benchmarks with only tRAS varied to determine the best tRAS setting for these memories. We achieved the best bandwidth at tRAS settings ranging from 5 to 8, so a tRAS setting of 6 was used for testing wherever possible.

Test Settings

All AMD Athlon 64 processors are unlocked downward, and the FX CPUs are unlocked up and down. This feature allows a different approach to memory testing, which truly measures performance differences in memory speed alone. All tests were run with CPU speed as close to the specified 2.4GHz of the 4000+/FX53 as possible, with CPU speed/Memory Speed increased at lower multipliers to achieve 2.4Ghz. This approach allows the true measurement of the impact of higher memory speed and timings on performance, since CPU speed is fixed, removing CPU speed as a factor in memory performance.

The following settings were tested with the seven Value RAM memories on the DFI nF4 test bed:
  1. 2.4GHz-12x200/DDR400 - the highest stock memory speed supported on VIA 939/nF3-4/SiS755-FX motherboards.
  2. 2.4GHz-11x218/DDR436 - a ratio near the standard DDR433 speed
  3. 2.4GHz-10x240/DDR480 - a ratio near the standard rating of DDR466. Several of the Value Memories achieved stable performance at this speed and complete benchmarks were run at this speed with those memories.
  4. Highest Memory Performance - the highest memory bandwidth and game performance that we could achieve with the memory being tested. This is rarely the highest memory speed that we could achieve. It is normally a lower speed with 1T Command Rate and tighter memory timings.
Command Rate is not normally a factor in Intel DDR tests, but it is a major concern in Athlon 64 performance. A Command Rate of 1T is considerably faster on Athlon 64 than a 2T Command Rate. For this reason, all testing was at 1T Command Rate. Command Rate and voltage are reported for each memory speed setting.

We ran our standard suite of memory performance benchmarks - Quake 3, Return to Castle Wolfenstein-Enemy Territory-Radar, Super Pi 2M, and Sandra 2004 Standard and UnBuffered. We also included Everest Home Edition memory tests, free at www.lavalys.com, for read speed, write speed, and Latency.

The Memories Kingston KVR400X64C25/512
Comments Locked

102 Comments

View All Comments

  • shoRunner - Monday, April 11, 2005 - link

    when did value ram cost $200 for a gig...
  • dvinnen - Monday, April 11, 2005 - link

    Anyone else finding these Value VX moduals? The link above timeings are 3-4-4-8, not 2.5-3-3-7.
  • JarredWalton - Monday, April 11, 2005 - link

    Please remember that it is rarely feasible for reviewers/sites to go out and buy all the hardware for a roundup. Wes submitted requests to several manufacturers, and this is what *they* felt like sending for testing. Of particular note is the comments from Corsair - they are not alone in rotating chip types on their value RAM. Maybe that is why several companies (i.e. Mushkin) didn't simply send their cheapest RAM.

    Looking around at various resellers and the pricing Engine, there are quite a few other RAM manufacturers/models out there worth considering. Corsair, Crucial, PDP, PQI, G.Skill, and several others have some really good RAM at $150 or less. You can even find PC4000 rated RAM for around $160 now.

    Trust me, it's not practical to try to do a roundup of ALL value RAM. There are just so many models out there, all with different performance characteristics. If you don't want to overclock (at all), most of the $90 to $120 RAM will work well.

    We should also have a "Your Mileage May Vary" clause in the article, as what Wes achieved is by no means a scientific sampling of each product. That would require at least 10 samples of each, and when you take the amount of time required to test OC'ing on *one* DIMM setup, it would take months to complete a scientific sampling of RAM.
  • reactor - Monday, April 11, 2005 - link

    quite right tony, was well done and hope to see further editions of the article. paying less and getting more is always good :)
  • bigtoe36 - Monday, April 11, 2005 - link

    Typos's..."seem" is seen, "we" is were...se we all make mistakes.
  • bigtoe36 - Monday, April 11, 2005 - link

    VX runs well with 2-3-2 timings with lower voltage. I have seem 233fsb 2-3-2 at 2.8V or so which is a little faster than 2.5-3-3 at the same fsb ;-).

    Regarding the modules that we not tested, you have to remember there are hundreds of different types of ram, not all can be reviewed in one go, I suspect this review alone took quite some time to complete as the AT LABs are a real busy place...i know Wesley is VERY busy not only reviewing but also pushing manufacturers to get boards overclocking better and pushing the enthusiast movent forward.

    If only you guys had any idea of what Wes has done for the enthusiast over the past 2 years, i do and please take it from me the boards you are seeing at the moment are the fruits of that work.

    Well done Wesley, nice review as always, even with the odd typo in amoungst the 8K words you wrote ;-)

  • bobsmith1492 - Monday, April 11, 2005 - link

    Well, anyway, what about the decent Mushkin CAS 2.5 for $84? It seems like a much better deal than the one they tested.

    http://www.newegg.com/app/ViewProductDesc.asp?desc...
  • reactor - Monday, April 11, 2005 - link

    wouldve like to have seen mushkin blue line and twinmos tmii400, both are supposed to be good comptetitors to the Value VX/BH from OCZ.
  • Cygni - Monday, April 11, 2005 - link

    They reviewed Value ram from the MAJOR mfts, they didnt review no name or OEM pieces, just brand name retail stuff.
  • bobsmith1492 - Monday, April 11, 2005 - link

    Who picked these.... :(

    What about the V-data 3200 CAS 2.5 ram for $70/gig at Newegg or the Mushkin CAS 2.5 for ~80? The ones in the review seem more expensive for slower ratings than most of the stuff at Newegg.

    That said, the $115 VX value sounds pretty sweet.

Log in

Don't have an account? Sign up now