Kingston KVR400X64C25/512

Kingston is the world's largest independent Memory manufacturer with annual sales over $2.4 Billion. Kingston is a very well-known memory brand, and it can be found at almost any large computer dealer. Kingston has a very complete line of memory products from the cheapest Value RAM to their enthusiast HyperX products. Kingston is also a brand that you will often see on sale at the big computer chains.

Kingston KVR400X64C25/512 was supplied as two individual DIMMs, rather than a 1GB kit. The RAM is rated at CAS 2.5 at DDR400.

Heatspreaders are not as often seen in Value products, since manufacturers are usually doing whatever is necessary to bring in the lowest price. This means eliminating extras like heatspreaders. Memory chips on the CAS 2.5 are blanks that are labeled with the Kingston logo.

Specifications

The KVR400X64C25/512 is rated at CAS 2.5. Kingston supplied two Value RAM samples for testing - this CAS 2.5 and a lower cost Value RAM rated at CAS 3.

 Kingston KVR400X64C25/512 (DDR400) Memory Specifications
Number of DIMMs & Banks 2 DS
DIMM Size
Total Memory
512 MB
1GB
Rated Timings 2.5-3-3 at DDR400
SPD (Auto) Timings 2.5-3-3-8
Rated Voltage 2.6V

Test Results

Kingston KVR400X64C25/512 (DDR400) - 2 x 512Mb Double-Bank
CPU Ratio at 2.4GHz Memory
Speed
Memory Timings
& Voltage
Quake3
fps
Sandra UNBuffered Sandra Standard
Buffered
Super PI 2M places
(time in sec)
Wolfenstein - Radar - Enemy Territory fps
12x200 400 DDR 2.5-3-2-6
2.6V 1T
533.0 INT 2470
FLT 2642
INT 6016
FLT 5987
83 112.0
12x204
(2.45GHz)
Highest CPU/Mem Performance 2.5-3-3-6
2.7V 1T
533.2 INT 2636
FLT 2797
INT 6143
FLT 6112
81 112.4
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.

We haven't made a mistake here. As you can see, there is really no overclocking headroom at all with this Kingston 2.5 memory. While it actually outperforms specs with 2.5-3-2-6- timings at DDR400 at stock 2.6V, we could not complete our memory benchmarks above a 204 CPU setting. Super Pi and Unbuffered Memory tests worked fine to almost DDR480, but at any setting above 204 (DDR408), games would freeze or run in spurts and freezes. This points to a likely conflict with the AMD on-chip memory controller or the DFI nF4 motherboard, and in fact, the Kingston 2.5 may reach much high memory speeds on an Intel platform.

We have found Aida 32 to be very useful in examining read/write performance and memory latency. Aida 32 is now available as Everest Home Edition, a free download from www.lavalys.com.

Kingston KVR400X64C25/512 (DDR400) 2x512Mb Double-Bank
Everest 1.51
CPU Ratio at 2.4GHz Memory Speed Memory Timings
& Voltage
Everest READ
MB/s
Everest WRITE
MB/s
Everest Latency
ns
12x200 400 DDR 2.5-3-2-6
2.6V 1T
5800 1918 47.3
12x204
(2.45GHz)
Highest CPU/Mem Performance 2.5-3-3-6
2.6V 1T
5855 1991 46.9

The Memory Speed range was so limited with the Kingston CAS 2.5 that there is really little on which to comment. However, despite the problems above 204 on the Athlon 64, at stock DDR400, the Kingston KVR400X64C25/512 performed without any problems.

Performance Test Configuration Kingston KVR400X64C3AK2/1G
Comments Locked

102 Comments

View All Comments

  • dvinnen - Monday, April 11, 2005 - link

    Anandtech seems to be reading my mind. My XP rig died on me so I'm looking to make a cheap A64 system now. That OCZ value looks hot and fits nicly in my price range. Thanks for the artical.
  • MarkHark - Monday, April 11, 2005 - link

    I would like to know how far you could push the "Value VX" on 2.8 to 2.9 Volts. They seem a very nice buy at a very nice price, but I don't feel comfortable with the idea of working at voltages way beyond spec, and I don't think I'd be willing to do so even if I opted for a DFI mobo.
  • MAME - Monday, April 11, 2005 - link

    how would these compare?

    http://www.newegg.com/app/ViewProductDesc.asp?desc...
  • Phlargo - Monday, April 11, 2005 - link

    http://www.atacom.com/program/atacom.cgi?SEARCH=SE...

    Deal forums, my friend.
  • RockSolid - Monday, April 11, 2005 - link

    Where can I buy the VX Value, I haven't been able to find it anywhere?
  • StuckMojo - Monday, April 11, 2005 - link

    doh!

    s/my clock/me clock/
  • StuckMojo - Monday, April 11, 2005 - link

    Odd. My Mushkin value 3200 runs at FSB 222MHz no problem, letting my clock my 90nm a64 3000+ to 2.4 without issue.
  • Pollock - Monday, April 11, 2005 - link

    I was starting to think this article would never appear.
  • Phlargo - Monday, April 11, 2005 - link

    Wow - this is a fabulous article! I've been looking for something exactly like this.

    I must be honest though, I ordered my gig of OCZ PC3200 Value VX last Thursday, so this is always nice to read.. especially when it gets to try my new DFI Nf4 mobo. Now where's that Venice CPU I've been waiting for?
  • acejj26 - Monday, April 11, 2005 - link

    Does anyone proofread these articles?? I found no less than 6 silly errors (i.e. 12x450). Please reread your articles before submitting them...the errors take away from the otherwise quality writeup.

Log in

Don't have an account? Sign up now