Gaming Performance

Wolfenstein-Enemy Territory-Radar

Gaming Performance - Single Video

Gaming Performance - SLI

Doom 3

Gaming Performance - Single Video

Gaming Performance - SLI

Aquamark 3

Gaming Performance - Single Video

Gaming Performance - SLI

Quake 3 Arena

Gaming Performance - Single Video

Gaming Performance - SLI

UT2004

Gaming Performance - Single Video

Gaming Performance - SLI

Far Cry

Gaming Performance - Single Video

Gaming Performance - SLI

Half-Life 2

Gaming Performance - Single Video

Gaming Performance - SLI

3DMark03

3DMark03 Performance - Single Video

3DMark03 Performance - SLI

3DMark05

3DMark05 Performance - Single Video

3DMark05 Performance - SLI

The most interesting result in looking at single video and SLI performance at 1600x1200 is the fact that no single leader emerges in our benchmarks at stock speeds. Any of the 4 tested SLI boards will provide great gaming performance at stock speeds in either single video or SLI modes.

When it was first reported that nVidia SLI supported FutureMark 3Dmark05 and 03, many gamers considered the support something of a joke. But as you can see in the benchmarks, both 3DMarks are very good at demonstrating the potential impact of SLI on gaming performance. Moving from single video to SLI increases 3DMark05 performance by almost 80%. Similarly, we see a performance increase of over 60% in 3DMark 03 when we compare results with a single video card to SLI. Aquamark 3, another "standardized" 1024 benchmark, also sees improvements with SLI, but they are much smaller than the huge performance gains in the 3DMarks.

Doom 3, Half Life 2, and Far Cry all follow patterns that we have seen in their performance since SLI was first introduced.

We purposely included a few benchmarks that we knew were not supported by current nVidia drivers to show what can happen in these games. SLI results in these non-supported games range from no improvement at all with SLI to small performance losses in Quake 3. The point is that SLI is only worth it if the game you want to play is supported by nVidia drivers. This may get a little more complicated if nVidia turns on SLI by default when the driver sees an unknown, but for now, you need a supported game for SLI to make sense.

Yes, we fully expect the new, exciting, and best-selling games that are on their way to be supported by SLI.

General Performance and Encoding Overclocking
Comments Locked

108 Comments

View All Comments

  • Heinrich - Monday, February 28, 2005 - link

    Hi, this is a great article. I'm really disappointed that the issues with the new Winchesters and the MSI board were not uncovered. The new CPUs will not post past FSB of 219, which is far below the 250 many get with other boards. Someone with the depth of knowledge, experience, and understanding of all these little options in the BIOS could help us uncover the real problem. Here's the best thread devoted specifically to the problem on Rebel HQ:

    http://www.rhcf.com/sisubb/ultimatebb.php/topic/21...
  • ajmiles - Monday, February 28, 2005 - link

    Hey,

    I enjoyed the round up of the SLI boards very much and thought it was very thorough.

    I own an A8N SLI Deluxe board, and too have been thoroughly disappointed with it's overclocking performance.

    On behalf of tens of users on the Anandtech - Motherboards forums, would it be beyond Anandtech's power to get a statement from Asus about the issue???

    At a 2T Command Rate the board will overclock to 316, 1T however just 249. The sudden BSODing as you approach 250 smacks of something that could be fixed with a BIOS update.

    Please Anandtech, A8N users are begging for this to be fixed, or at least be told it can't be.

    Many thanks, and again, a great article.
    Adam Miles
  • Viper4185 - Monday, February 28, 2005 - link

    is it true that the MSI board doesnt have a PCI Express x1 slot so that when the new Creative PCI express sound cards come out it wont fit?
  • Viper4185 - Monday, February 28, 2005 - link

    Thanks for the review guys, just what I wanted! Although I am interested in the Ultra versions its still very similar...

    I was wondring if you could comment on the stability/stress testing of the DFI board as Hardocp seems to have had some issues...
    http://www.hardocp.com/article.html?art=NzE3LDc=

    Also would have been good if you included the Abit Fatal1ty board to make the review 100% conclusive for me.
  • nzimmers - Monday, February 28, 2005 - link

    dang, I wasn't first, oh well.

    one more thing....I no longer chase the FPS demon, and I am better for it (mentally and emotionally). To be honest I don't expect SLI to become a standard in MB design.....even for high end gamers. Isn't the price just too high?
  • nzimmers - Monday, February 28, 2005 - link

    First post!

    I was actually really (plesantly) surprised that DFI did so well. I know that they have been improving lately but isn't it great to see another MB manufacturer improving for once?
  • arfan - Monday, February 28, 2005 - link

    finally...., thx 4 your review
  • jkv71 - Saturday, June 3, 2017 - link

    My DFI video quit. I use an adapter to run hdmi on my tv. I replaced the video card and still nothing. I replaced the mother board. Still nothing. Any ideas?

Log in

Don't have an account? Sign up now