MSI MEG X570 Godlike

Swinging around onto MSI's X570 product stack and we open up with its most premium and ultimately the flagship, the MSI MEG X570 Godlike. The MSI MEG X570 GODLIKE is its flagship X570 motherboard designed for both enthusiasts and gamers with a range of high-end controllers, accessories, and also features a 20-phase power delivery; 14-phase for the CPU VCore and 4-phase for the VGT/SoC.

The X570 chipset on MSI motherboards including this model is actively cooled by a single fan featuring double ball bearing technology which MSI is calling Zero Frozr. Aesthetically the MEG X570 Godlike is impressive and even features an OLED screen which is implemented between the four DDR4 memory slots and the 24-pin ATX 12 V motherboard power input. The four memory slots have support for DDR4-4800 and up to 128 GB of total system memory. Touching on the accessories bundle included with the X570 Godlike is an Aquantia AQC107 10 GbE add-in card and M.2 Xpander-Z Gen4 M.2 PCIe add-on card which allows users to add an additional two PCIe 4.0 x4 M.2 drives on top of the three PCIe 4.0 x4 slots that are present on the board.  Each onboard M.2 slot includes its own individual Lightning Gen4 M.2 heatsink. 


The MSI MEG X570 Godlike comes with an M.2 Xpander-Z Gen4 and Aquantia 10 G NIC add-on card

The MSI MEG X570 Godlike's PCB is four full-length PCIe 4.0 slots which operate at x16, x8/x0/x8, and x8/x4/x4, with the last full-length slot locked down to PCIe 4.0 x4. This means both two-way NVIDIA SLI and up to four-way AMD CrossFire multi-graphics card setups. A lot of focus has also been put enthusiasts with its 16-phase power delivery for the VCore; this power delivery uses Infineon TDA21472 MOSFETs with IR3599 doublers and runs from an IR35201 Digital PWM controller. Providing power to the CPU is two 8-pin 12 V ATX CPU power inputs setting the Godlike up as MSI's most enthusiast-level desktop board for any AMD platform in recent times.

Looking at the rear panel of the X570 Godlike, there are three USB 3.1 Gen2 Type-A, one USB 3.1 G2 Type-C, and two USB 3.1 G1 Type-A ports. Commonly featured on premium models, the MSI MEG X570 Godlike also has a pre-installed rear panel IO shield. Also present is a Flash BIOS button with a highlighted Type-A port dedicated to firmware flashing, as well as a Clear CMOS button, and a PS/2 combo port. The onboard audio is powered by two Realtek ALC1220 HD audio codecs with five 3.5 mm jacks and S/PDIF optical output, MSI has included an ESS E9018 DAC for good measure, which also adds a dedicated 6.3 mm jack for studio headphones which is included in the accessories bundle. The rear panel has two Ethernet ports with a Killer pairing consisting of an E3000 2.5 G, and E2600 Gigabit NIC.

The MSI MEG X570 Godlike E-ATX motherboard has an MSRP of $699 which for everything that is included is quite impressive. With an impressive accessories bundle which includes an Aquantia AQC107 10 G NIC add-on card, an Xpander-Z Gen4 M.2 card which adds a scope for an additional two PCIe 4.0 x4 M.2 drives to be installed bringing to total to five is also a nice touch. It's not a cheap investment, but it's an impressive option for gamers, enthusiasts, and hardware aficionados looking to create a high-end system using Ryzen 3000.

GIGABYTE X570 Gaming X MSI MEG X570 Ace
Comments Locked

225 Comments

View All Comments

  • mikato - Thursday, July 11, 2019 - link

    That’s great to hear. I wonder why they don’t put a decent heatsink on there like they did a long time ago (Penguin 4 days maybe). Is it still too much heat for a big heatsink with no fan?
  • Makaveli - Tuesday, July 9, 2019 - link

    Thank you for this round up and more importantly the summary page at the end.

    I think I going with the ASUS Prime X570-Pro for my build, its the most affordable in CAD.
    Never was interested in Wifi on a Desktop PC yuck and the rest if just way too over priced.

    I do like the simple look of the ASUS Pro WS X570-Ace but for $500 CAD not interested at that price you might aswell go Threadripper.
  • Andy Chow - Tuesday, July 9, 2019 - link

    I still don't understand why all these boards have HDMI and/or DP on them. Virtually every Intel consumer CPU has an iGPU in it, so it makes sense there. For AMD, I want MOAR CORES, not an iGPU. So that's 1-2 ports that will never get used, which could have been a couple of usb-3 ports.
  • Qasar - Tuesday, July 9, 2019 - link

    i bet they are for future zen 2 based APUs....
  • Qasar - Tuesday, July 9, 2019 - link

    or current ones for that matter
  • Death666Angel - Wednesday, July 10, 2019 - link

    Because AMD also has iGPU enabled CPUs (which they call APUs). And economies of scale being what they are, this makes more sense than having separate SKUs. Also, do you actually use up all 8 to 12 USB ports on the back?
  • The_Assimilator - Wednesday, July 10, 2019 - link

    It's so that the manufacturers can get more negative reviews on online shopping sites. "I BOUGHT THIS BOARD BECAUSE IT HAS DISPLAY OUTPUTS BUT THEY DON'T WORK SO I'M GIVING IT 1 STAR EVEN THOUGH I DIDN'T BOTHER TO DO THE 5 MINUTES OF RESEARCH IT WOULD'VE TAKEN TO EDUCATE MYSELF AS TO WHAT I NEED FOR THE DISPLAY OUTPUTS TO WORK".

    I agree with you that more USB ports instead would be a lot more useful.
  • mikato - Thursday, July 11, 2019 - link

    Upvote
  • boozed - Tuesday, July 9, 2019 - link

    The last page is a godsend, more of this kind of thing please!
  • NOTELLN - Tuesday, July 9, 2019 - link

    This data is wrong. These are not the proper core counts. For example, the International Rectifier IR35201 PWM controller can only do 8+0, 7+1, or 6+2, making the MSI pro and gaming plus 4+2 phase boards. You boys need to go back to the drawing board.

Log in

Don't have an account? Sign up now