Test Bed and Setup

As per our processor testing policy, we take a premium category motherboard suitable for the socket, and equip the system with a suitable amount of memory running at the manufacturer's maximum supported frequency. This is also typically run at JEDEC subtimings where possible. It is noted that some users are not keen on this policy, stating that sometimes the maximum supported frequency is quite low, or faster memory is available at a similar price, or that the JEDEC speeds can be prohibitive for performance. While these comments make sense, ultimately very few users apply memory profiles (either XMP or other) as they require interaction with the BIOS, and most users will fall back on JEDEC supported speeds - this includes home users as well as industry who might want to shave off a cent or two from the cost or stay within the margins set by the manufacturer. Where possible, we will extend out testing to include faster memory modules either at the same time as the review or a later date.

Test Setup
Intel i7-9700K ASRock Z370
Pro Gaming i7
P3.20 TRUE Copper Corsair Vengeance
4x8GB
DDR4-2666
Intel i7-7700K GIGABYTE X170
Extreme-ECC
F21e Silverstone
AR10-115XS*
G.Skill RipjawsV
2x16GB
DDR4-2400
Intel i7-2600K (OC) ASRock Z77
OC Formula
P2.40 TRUE Copper GeIL Evo Veloce
2x8GB
DDR3-2400
Intel i7-2600K ASRock Z77
OC Formula
P2.40 TRUE Copper G.Skill Ares
4x4 GB
DDR3-1333
GPU Sapphire RX 460 2GB (CPU Tests)
MSI GTX 1080 Gaming 8G (Gaming Tests)
PSU Corsair AX860i
Corsair AX1200i
SSD Crucial MX200 1TB
OS Windows 10 x64 RS3 1709
Spectre and Meltdown Patched
*VRM Supplimented with SST-FHP141-VF 173 CFM fans

Many thanks to...

We must thank the following companies for kindly providing hardware for our multiple test beds. Some of this hardware is not in this test bed specifically, but is used in other testing.

Hardware Providers
Sapphire RX 460 Nitro MSI GTX 1080 Gaming X OC Crucial MX200 +
MX500 SSDs
Corsair AX860i +
AX1200i PSUs
G.Skill RipjawsV,
SniperX, FlareX
Crucial Ballistix
DDR4
Silverstone
Coolers
Silverstone
Fans
Sandy Bridge: Outside the Core Our New Testing Suite for 2019 and 2020
Comments Locked

213 Comments

View All Comments

  • mr_tawan - Sunday, May 12, 2019 - link

    Just upgraded to Core i7 4790 (from i5 4460) late last year. At first I was thinking about upgrading to the shiny Ryzen 7, but overall cost is pretty high considering I have my H97 mainboard with 16GB of memory. I don't want to shell out that much money and getting stuck at older platform, again.

    It does work ok, with the performance around the current gen Core i5 I guess (with less power efficiency). Consider what I paid, I think it's not too bad.
  • just4U - Sunday, May 12, 2019 - link

    A interesting read there Ian. I started to notice a slow down on 2600K class systems a few years ago when I worked on them.. (I hadn't used one since 2014) For me.. If I can notice those slowdowns in real time then it's time to move away from that CPU. The 4790K appears to still be holding up ok but older 3000/2000 chips not so well.
  • crotach - Sunday, May 12, 2019 - link

    Still running 3930k Sandy Bridge.

    Maybe Ryzen 3000 will give me a reason to upgrade.
  • AndrewJacksonZA - Sunday, May 12, 2019 - link

    Best quote out of the entire article:
    "In 2019, the landscape has changed: gamers gonna stream, designers gonna design, scientists gonna simulate, and emulators gonna emulate" :-)

    But seriously though, for me, when I upgraded from a Core2Duo E6750 with 4GB of RAM to an i7-6700 (non-K) with 16GB of RAM, it was simply amazing. I was fully expecting that going from an i7-2600K to an i7-9700K would be similar - and it is for things like compiling but not for things like gaming.

    Thanks for the aricle, Ian! Dig the LAN setup. :-)
  • Targon - Sunday, May 12, 2019 - link

    Why would you test a CPU and use a framerate test from Civilization 6, rather than the turn length benchmark which is a true test of the CPU rather than the GPU? Turn based games SHOULD be there as CPU tests, and only caring about the framerates seems to be wrong.
  • Oxford Guy - Sunday, May 12, 2019 - link

    When your overclock fails in one test you're unstable.

    When it fails in four, as in this article, you're both unstable and laughable.

    "Had issues". "For whatever reason". I will assume this is all intended to be humor.
  • DeltaIO - Monday, May 13, 2019 - link

    Interesting article to read. I've only recently upgraded from my 2600k to the 9700k, even that was begrudgingly as the 2600k itself still works fine, however the motherboard simply decided to give up on me.

    I've got to say though, the difference in the subsystems (NVMe vs SSD makes for some great load times for pretty much everything) as well as other tangible benefits (gaming at higher frame rates) is quite apparent now I have upgraded.

    I would have upgraded far sooner had Intel not chosen to keep changing the sockets, swapping out just a CPU is far simpler than rebuilding the entire system.
  • Tedaz - Monday, May 13, 2019 - link

    Expecting i9-9900K joins the article.
  • Badelhas - Monday, May 13, 2019 - link

    I an still with a 2500K overclocked to 4.8Ghz, 8Gb of DDR3 1600Mhz RAM and, a 850 Evo SSD and a Nvidia 1070. I honestly see no reason to upgrade.
    IAN: All your testing basically demonstrated that there is no real reason that justifies spending 400 bucks for a new CPU, 200 bucks for a new Motherboard and 100 bucks for new DDR4 Ram - This totals 700 dollars. But your conclusion is that we should upgrade?! I dont get it.
  • tmanini - Monday, May 13, 2019 - link

    Go ahead and re-read his "Bottom Line" concluding articles: gives a few specific recommendations where is may and may not be to your advantage. And if you aren't desiring/needing all of the other new bells/whistles that go along with newer boards and architecture, then you are set (he says).
    Seems pretty clear.

Log in

Don't have an account? Sign up now