ECS KV2 Extreme: Features and Layout


ECS KV2 Extreme Motherboard Specifications
CPU Interface Socket 939 Athlon 64
Chipset VIA K8T800 PRO/VT8237
Bus Speeds 200MHz to 511MHz (in 1MHz increments)
CPU Ratios 4x - 20x in 0.5x increments
PCI/AGP Speeds Disabled, 66.0, 75.4
HyperTransport 1GHz to 200MHz (5x-1x)
Core Voltage 0.825V to 1.55V in .025V increments
DRAM Voltage 2.50V to 2.7V in 0.05V increments
AGP Voltage 1.45V, 1.53V, 1.57V, 1.60V
Chipset Voltage None
Memory Slots Four 184-pin DDR DIMM Slots
Dual-Channel Unbuffered Memory to 4GB
Expansion Slots 1 AGP 8X Slot
5 PCI Slots
Onboard SATA/RAID 2 SATA 150 drives by VIA VT8237
plus 2 SATA 150 by SiS 180
Can be combined in RAID 0, 1, 0+1, JBOD
Onboard IDE Two Standard VIA ATA133/100/66 (4 drives)
plus 2 IDE 133/100/66 by SiS 180
Onboard USB 2.0/IEEE-1394 8 USB 2.0 ports supported by VIA VT8237
2 IEEE 1394a FireWire Ports by VIA VT6307
DUAL Onboard LAN Gigabit Ethernet by Marvel 88E8001
plus 10/100 by VIA VT6103L
Onboard Audio Realtek ALC655
6-Channel with SPDIF
Tested BIOS 1.1A


ECS hopes that the bronze-foil box with a feature flap clearly announces that the ECS KV2 Extreme is a premium board. The Extreme name is reserved for the top ECS boards, and with the Socket 939 currently a premium board, the KV2 announces that ECS wants to be a contender at the top.

The KV2 Extreme even has the individual interior boxes that we first saw on Abit motherboards, carefully fitted to protect the manuals and brackets . This should not come as a complete surprise, since ECS also manufactures some motherboards for Abit. The KV2 is a 6-layer, 3-phase design, which includes all the bells and whistles that you have come to expect from top-of-the-line motherboards. This includes Dual RAID, Dual LAN, 4 SATA ports, 2 Firewire ports, provisions for 6 IDE drives, and active North Bridge cooling.



Just so you don't miss it, ECS even has a silver plaque on the purple KV2 announcing it is a member of the Extreme series. The layout of the board is generally excellent, showing great attention to the smallest details. ECS has placed the ATX, IDE, and floppy connectors in our preferred upper right edge location. Even the extra IDE for the 5th and 6th IDE is out of the way for the PCI slots.

The BIOS adjustments on the early versions of the KV2 were very sparse, but ECS quickly updated the KV2 Extreme with the CPU Frequency adjustments, ratios, and PCI/AGP lock that you would expect on a premium 939 motherboard. Our only complaints about the available options are that the vCore is still rather meager with a top of 1.55V; 1.70 volts would have been preferred. Also, the vDIMM to only 2.7V is low for a board that intends to compete in this arena - a range to at least 2.85V and preferably 3.0V would be better.

The range of CPU Frequency adjustments to 511 is incredible, but we found that we could only use a very small portion of that frequency range. While we verified that the AGP/PCI lock is working with a PCI Geiger, we were still limited in our overclocking attempts compared to other VIA boards in this roundup.

Asus A8V Deluxe: Overclocking and Stress Testing ECS KV2 Extreme: Overclocking and Stress Testing
Comments Locked

83 Comments

View All Comments

  • Wesley Fink - Sunday, July 25, 2004 - link

    In compiling benchmarks for the upcoming 925X roundup, we realized we had used a different setup for our 925X AutoGK tests in this review than the setup for 939. This caused lower results with the 925X than we achieved with the same setup.

    AutoGK results have been corrected, and now show essentially the same encoding performance with the DivX 5.1.1 codec on both Intel 560 and AMD FX53 processors with a slight advantage to Intel. Tests with the Xvid codec show almost the same equivalent results with a slight tilt toward AMD.

    Graphs and review text have been corrected to reflect the corrected encoding results. Current AutoGK settings are 'no audio' and default '2CDs (1400Mb)' output size. We install and select Divx 5.1.1 instead of the included Xvid codec. Ripping is from the original DVD file for Chapter 9 of "Sum of All Fears". At present we use the latest release version of AutoGK, which is 1.25, though there are beta versions available through 1.48.


  • Wesley Fink - Saturday, July 24, 2004 - link

    #61 - You are mistaken in saying we used the SAME CPU in comparing 875 and 925X. If you will check our review at http://www.anandtech.com/cpuchipsets/showdoc.aspx?... you will see that our comparison #2 was a 3.2E on the 925X to a 3.2 Northwood on 875. In fact we got a lot of flak from some readers because we didn't use the same CPU. We felt then, and still feel, the fairest comparison was the 875 with Northwood to a similar speed 775 with Prescott.

    Our options on 939 are a 3500+ (512k cache) at $500, a 3800+ (512k) at $700, or a FX53 (1MB cache) at $763. AMD is expected to announce price reductions soon, but those are our current 939 choices. Given those 3 options with prices beginning at $500, the FX53 is an easy recommendation.
  • Staples - Saturday, July 24, 2004 - link

    Arrggg.

    Interesting numbers but I hate the fact that Anandtech keeps using the FXxx and only the FXxx. Sure I can now see that AMDs best wins over Intel's best but that is not really practical because I will never buy an FXxx. I want benchmarks between stuff the average consumer is going to buy. Most people including me are struck between.

    875/865 and Northwood (non EE)
    925x/915 and a Presscott (non EE)
    AMD64 754 vs 939 chips and chipsets but NOT the FX series.

    These testbeds have only added to a string of Anandtech blunders. Remember the 925x review which was supposed to compare the 875 against the 925x? Well to elimate as many variable as possible, you use the SAME cpu, not a Northwood in one and a Presscott in the other.

    I love Anandtech and I usually only come here for reviews but I really wish the staff would put more scientific thought into their testbeds. I will never buy an FX series processor and neither will most people because they cost way too much. At least you can throw in a testbed or two of some processors that the common man will actually buy.

    Hope this critical post circulates with the staff and is actually taken into consideration.
  • PrinceGaz - Saturday, July 24, 2004 - link

    Would there really be any point in providing FSB adjustments above 300 on say the MSI K8N mobo?

    As far as I know there are only two reasons for increasing the FSB-- increasing the memory speed, and increasing CPU core speed on non-FX chips which don't have an upwardly adjustable multiplier.

    Theres no point in increasing the FSB beyond the point where the memory can run at a 1:1 ratio, and your fastest DDR550 memory was only able to hit 290FSB (DDR580). Unless faster DDR memory becomes available (which seems unlikely as the focus for speed will switch to DDR2), then 300FSB is more than enough.

    The only other reason for increasing the FSB would be if you were seriously overclocking a CPU. 300FSB is enough for a 50% overclock which is more than enough for anyone. Maybe if someone got the liquid nitrogen out they could take a 3500+ beyond 3.3GHz, but I'm sure those sort of people would have got the fastest FX instead so they could raise the multiplier and not have to worry about bus speeds holding them back.

    Myself, I'm sure I'm not alone in holding out for S939 boards with PCI-Express support. And maybe a 90nm Athlon 64 if they arrive before the end of the year. And if the MSI K8N whatever that is available then is as good as the current ones, that'll probably be what I get.
  • Wesley Fink - Saturday, July 24, 2004 - link

    #58 and others -

    The nForce3-250Gb and NForce3 Ultra do not provide a full integrated Gigabit LAN in the chip. They provide a MAC (Media Access Controller) and a dedicated Gigabit Ethernet PORT on the chip (nF30250GB and nF3-Ultra). This is then interfaced to any number of PHY (Physical Layer) Gigabit Ethernet Controllers.

    To quote the nF3 Tech paper from nVidia:
    "NVIDIA nForce solutions provide an industry-standard Reduced Gigabit Media Independent Interface (RGMII) for attachment of the 1000BASE-T Gigabit Ethernet PHY. The open, nonproprietary interface lets system designers interface the NVIDIA solution to Ethernet PHY from a variety of vendors. Consumers and enterprises all benefit from a broad range of competitive PHY offerings."

    This means seeing a listing of a particlular Gigabit Eternet Controller does NOT mean an nForce3 board is not using the on-chip Ethernet.

    If you look closely at the specs for the MSI, the Marvell LAN chip is spec'ed as PHY. It is also worth noting that the Marvell 88E1111 is the same chip nVidia used in their Reference designs for the nF3-250Gb and nF3-Ultra Reference Boards, but other brands can be used as you can see in the nVidia literature.
  • darklight0tr - Saturday, July 24, 2004 - link

    Wesley,

    I was wondering how you determined that the MSI K8N Neo2 used the onboard nVIDIA LAN.

    If you go to the MSI website and look at the specs for the board, it says that the Dual LAN ports are controlled by Realtek and Marvell controllers, respectively. The nVIDIA LAN is not used.

    Is the board you tested different than the board listed on the MSI website?

    Also, is there any particular reason that no nForce3 Ultra motherboards use the onboard nVIDIA LAN?
  • Drayvn - Friday, July 23, 2004 - link

    I thought it was pretty widely known that a nVidia graphics card will be totally optimized on a nVidia mobo, so when testing the X800 on an nForce chipset, ull get lower performance numbers wouldnt u, and so wouldnt that muck up the test results?

    #53, it still does show how well the FX-53 does against a product that is coming out in 2 months doesnt, and this 3.6Ghz is 1.2 Ghz faster and still its being outperformed, so isnt this telling u that the FX-53 is the system to go for? No need to get upset about the intel chip not being out, get the FX-53 now!
  • vie2233hil - Friday, July 23, 2004 - link

    has anybody seen A8V revision 2 anywhere?
  • Anemone - Friday, July 23, 2004 - link

    ECC while nice, doesn't seem to come in any high performance modules that aren't registered. And we know these boards don't take registered memory, which would make using ECC memory translate to using something at PC3200 or below.

    Am I incorrect?
  • normteke - Thursday, July 22, 2004 - link

    I'm pretty new to overclocking. So when you guys say you can bump the fsb to 290 with a lower multiplier and a 1:1 memory ratio, does the memory now have to run at 290 as well, or can it stay at default 200 to keep those tight 2-2-2 memory timings? How exactly does that work?

Log in

Don't have an account? Sign up now