ASRock Z390 Phantom Gaming-ITX/ac

One of two mini-ITX offerings from ASRock for the launch of the Z390 includes the gaming-centric Z390 Phantom Gaming-ITX/ac. The ASRock Z390 Phantom Gaming-ITX/ac follows an all-black design with speckly metallic heatsinks which includes RGB LED lighting at the bottom of the board. The main features include an Intel-based Gigabit LAN (I219V) and 2T2R Wave 2 802.11ac capable wi-fi adapter pairing and this board is one of the only Z390 motherboards to include a Thunderbolt 3Type-C port on the rear panel. The cooling capabilities are hindered slightly due to the form factor with a total of three 4-pin fan headers with two-thirds located along the top. There is an 8-pin 12 V ATX CPU power input and ASRock advertises an 8-phase power delivery; the SoC area of the power delivery is without a heatsink.

As the Z390 Phantom Gaming-ITX/ac is smaller it makes use of a single ASRock Steel Slot clad full-length PCIe 3.0 x16 slot with an M.2 slot located just above which offers support for PCIe 3.0 x4/SATA, while ASRock combines the chipset and M.2 heatsink as one to save space, but still offer the heat dissipation quality for hot running NVMe based drives. A second PCIe 3.0 x4/SATA slot is located on the rear of the boards PCB, while a total of four SATA ports with straight-angled connectors are located towards the bottom right of the board. Memory support consists of two slots with a maximum capacity of up to 32 GB and support for up to DDR4-4266.

The rear panel of the Z390 Phantom Gaming-ITX/ac motherboard offers a quality range of connections which puts a lot of boards to shame in this regard. Included is a Thunderbolt 3 Type-C ports with a total of four USB 3.1 Gen2 Type-A and two USB 3.0 Type-A ports. A single LAN port powered by an Intel I219V Gigabit networking chip is present along with five 3.5 mm audio jacks and a single S/PDIF optical output which is controlled by a Realtek ALC1220 HD audio codec. For users looking to use this board with integrated graphics, the Z390 Phantom Gaming-ITX/ac has two video outputs consisting of a DVI-D and an HDMI 2.0 outputFinishing off the rear panel is two connectors for the 2T2R Wave 2 802.11ac capable Wi-Fi antenna, a PS/2 combo port and a conveniently placed reset CMOS button.

Buy the ASRock Z390 Phantom Gaming ITX/AC

In terms of pricing, the ASRock Z390 Phantom Gaming-ITX/ac has an MSRP of $190 which is cheaper than I was expecting given the sheer amount of high-end features have been packed onto the PCB. The inclusion of a Thunderbolt 3 Type-C along with four USB 3.1 Gen2 Type-A ports shows that where space has been used, it's been used to good effect; one of the benefits of the Z390 chipset is native USB 3.1 Gen2. A solid looking (visually) power delivery and with 2T2R Wave 2 802.11ac wireless capability marks another mini-ITX ASRock board aimed at the high-end enthusiast; I am personally very interested in seeing how this board performs as I'm a big fan of mini-ITX boards.

ASRock Z390 Phantom Gaming SLI/ac ASRock Z390 Pro4 & Z390M Pro4
Comments Locked

79 Comments

View All Comments

  • DanTMWTMP - Thursday, October 11, 2018 - link

    Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/
  • gavbon - Friday, October 12, 2018 - link

    Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.
  • Nagorak - Sunday, October 14, 2018 - link

    Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.
  • WickedMONK3Y - Friday, October 12, 2018 - link

    The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.

    I really really hope somebody comes out with a board that has a PLX chip on board.
  • gavbon - Friday, October 12, 2018 - link

    The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)
  • ZioTom - Friday, October 12, 2018 - link

    It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.
  • happyfirst - Friday, October 12, 2018 - link

    I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.
  • ddcc - Saturday, October 13, 2018 - link

    Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.
  • gavbon - Monday, October 15, 2018 - link

    I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)
  • gavbon - Sunday, October 21, 2018 - link

    Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing

Log in

Don't have an account? Sign up now