Intel Z390 Motherboard Overview: 50+ Motherboards Analyzed
by Ian Cutress & Gavin Bonshor on October 8, 2018 10:53 AM EST- Posted in
- Motherboards
- Intel
- MSI
- Gigabyte
- ASRock
- EVGA
- Asus
- NZXT
- Supermicro
- Z390
MAXSUN iCraft Z390
MAXSUN is a Chinese manufacturer and focuses its attention primarily on the Chinese and South Korean Asian markets. Only one of their models has been leaked as such and images of the iCraft Z390 motherboard are starting to surface across the internet. The most notable thing to note on this board is that it features a PCB cover around the PCIe slot area which resembles that of the ASUS ROG Maximus XI Code.
Although there are no official specifications as of yet, we do the MAXSUN iCraft Z390 looks to have plenty of RGB LED lighting with four seemingly dedicated zones available for customization. These include the PCB cover across the bottom half of the board, the rear panel cover, along with the four available RAM slots and along the right-hand side of the board. The board has three metal reinforced full-length PCIe 3.0 slots which will most likely operate at x16, x8 and x4; with two-way SLI support likely with probable three-way CrossFire multi-graphics card configuration support too. Also on the PCB is three PCIe 3.0 x1 slots and at the bottom right-hand corner of the board, a LED debug is present along with a total of six SATA ports.
As it stands from the images, no M.2 slots can be visually seen, but there could be a slot or two underneath the PCB cover which surrounds the PCIe slots and gives the board a cleaner look overall. Pricing is as of yet unknown and the retail availability of the MAXSUN iCraft Z390 ATX motherboard is likely to remain limited to the Chinese and South Korean markets.
Facebook
Twitter
RSS
79 Comments
View All Comments
DanTMWTMP - Thursday, October 11, 2018 - link
Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/gavbon - Friday, October 12, 2018 - link
Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.Nagorak - Sunday, October 14, 2018 - link
Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.WickedMONK3Y - Friday, October 12, 2018 - link
The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.I really really hope somebody comes out with a board that has a PLX chip on board.
gavbon - Friday, October 12, 2018 - link
The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)ZioTom - Friday, October 12, 2018 - link
It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.happyfirst - Friday, October 12, 2018 - link
I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.ddcc - Saturday, October 13, 2018 - link
Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.gavbon - Monday, October 15, 2018 - link
I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)gavbon - Sunday, October 21, 2018 - link
Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing