GIGABYTE Z390 Gaming X

The GIGABYTE Z390 Gaming X looks to share a very similar PCB and design as the Z390 Gaming SLI with a black and silver design (red accents) but looks to enter the market at a lower price point. Both boards feature much of the same characteristics including power delivery, dual 8 and 4-pin CPU power inputs and PCIe slot layout, but replaces Realtek ALC1220-VB codec and instead opts for a cheaper Realtek ALC892. The Gaming X drops SLI support and features two full-length PCIe 3.0 slots which run at x16 and x4 respectively. The top slot also has a coating of metal PCIe slot protection and two-way CrossFire is officially supported; there are also three PCIe 3.0 x1 slots included on the board.

On the storage front, the Z390 Gaming X has a pair of PCIe 3.0 x4/SATA M.2 slots with the top slot being treated to an M.2 heatsink. The board also has a total of six SATA ports which allow for RAID 0, 1, 5 and 10 arrays to be used. The board also offers a maximum capacity of up to 64 GB of system memory, with the rated XMP specification currently unknown as of yet.

USB wise the board has a total of eight ports which consist of one USB 3.1 Gen2 Type-A, five USB 3.0 Type-A and two USB 2.0 ports; an additional two USB 3.0 and two USB 2.0 ports can be made available through the internal headers on the board. The rest of the rear panel consists of a single HDMI out, a PS/2 combo port, a single LAN port powered by an Intel I219V Gigabit controller and six 3.5 mm audio jacks which are controlled by a Realtek ALC892 HD audio codec.

The GIGABYTE Z390 Gaming X's pricing stands at $150 as it sits towards the bottom of GIGABYTEs Z390 product range. The board is aimed towards gamers with lower budgets and looks to make GIGABYTE competitive in the entry-level Z390 market.

GIGABYTE Z390 Gaming SLI GIGABYTE Z390M Gaming
Comments Locked

79 Comments

View All Comments

  • DanTMWTMP - Thursday, October 11, 2018 - link

    Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/
  • gavbon - Friday, October 12, 2018 - link

    Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.
  • Nagorak - Sunday, October 14, 2018 - link

    Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.
  • WickedMONK3Y - Friday, October 12, 2018 - link

    The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.

    I really really hope somebody comes out with a board that has a PLX chip on board.
  • gavbon - Friday, October 12, 2018 - link

    The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)
  • ZioTom - Friday, October 12, 2018 - link

    It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.
  • happyfirst - Friday, October 12, 2018 - link

    I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.
  • ddcc - Saturday, October 13, 2018 - link

    Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.
  • gavbon - Monday, October 15, 2018 - link

    I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)
  • gavbon - Sunday, October 21, 2018 - link

    Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing

Log in

Don't have an account? Sign up now