ASUS ROG Maximus XI Formula

Another high-end board on the Z390 chipset from ASUS is the ROG Maximus XI Formula which has a similar rear panel cover as the Maximus XI Code along with what looks to be a near identical PCIe slot layout. Other similarities stretch to the use of a PCB cover which looks to have a little more flair and more RGB than the Code, but from a quick glance, the entirety of what's visible PCB wise looks to be identical to the ROG Maximus XI Code; this is not necessarily a bad thing. The biggest difference and impressive inclusion on the Formula over the Code is the EKWB power delivery water block which allows enthusiasts to hook it up to custom water cooling loops for even lower VRM temps; perfect for users to overclock their processors and NOT have to worry about the quality of the power delivery heatsinks.

The Maximus XI Formula keeps the same power and reset buttons with a LED debug in the top right corner. There are four RAM slots with support for DDR4-4400 with a maximum capacity of up to 64 GB in total. Built-in into the board is a pair of PCIe 3.0 x4 M.2 slots (one with SATA support and one without) which feature a pair of heatsinks which amalgamate into the boards overall aesthetic. Also present is a total of six SATA ports with support for RAID 0, 1, 5 and 10 arrays. 

The board has three full-length PCIe 3.0 slots which allow for two-way SLI and three-way CrossFire multi-graphics card support at x16/x0/x4 and x8/x8/x4 respectively much like the majority of the Maximus XI boards including the Hero, Hero (Wi-Fi) and Code. This also stretches to the onboard audio and networking with a Supreme-FX S1220 8-channel HD audio codec and a single Intel I219V Gigabit NIC on the rear panel.

With a host of quality connections integrated, there's dual LAN with one port being powered by an Aquantia AC111C 5 G NIC and the second by an Intel I219V Gigabit controller. Wireless networking is provided by a Wave 2 2T2R 802.11ac Wi-Fi adapter and a single HDMI 1.4b video output. The same pair of buttons consisting of a BIOS Flashback and clear CMOS is featured much like the Code, and the onboard audio is controlled by a gaming-focused SupremeFX S1220A HD audio codec. Last but not least is USB support, with three USB 3.1 Gen2 Type-A ports, a single USB 3.1 Gen2 Type-A port and a hefty six USB 3.0 Type-A ports completing a packed rear IO.

The ASUS ROG Maximus XI Formula has an unknown price as of yet, but is one of the top ASUS Z390 boards at launch with a clear focus on gaming based features and enthusiast grade components such as the EKWB made power delivery heatsink. The Formula is primarily targeted at gamers and enthusiasts with overclocking as a focus and the inclusion of 5 Gigabit LAN sets this board apart from the most of the Maximus XI range.

ASUS ROG Maximus XI Extreme ASUS ROG Maximus XI Gene
Comments Locked

79 Comments

View All Comments

  • DanTMWTMP - Thursday, October 11, 2018 - link

    Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/
  • gavbon - Friday, October 12, 2018 - link

    Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.
  • Nagorak - Sunday, October 14, 2018 - link

    Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.
  • WickedMONK3Y - Friday, October 12, 2018 - link

    The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.

    I really really hope somebody comes out with a board that has a PLX chip on board.
  • gavbon - Friday, October 12, 2018 - link

    The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)
  • ZioTom - Friday, October 12, 2018 - link

    It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.
  • happyfirst - Friday, October 12, 2018 - link

    I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.
  • ddcc - Saturday, October 13, 2018 - link

    Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.
  • gavbon - Monday, October 15, 2018 - link

    I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)
  • gavbon - Sunday, October 21, 2018 - link

    Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing

Log in

Don't have an account? Sign up now