Intel Z390 Motherboard Overview: 50+ Motherboards Analyzed
by Ian Cutress & Gavin Bonshor on October 8, 2018 10:53 AM EST- Posted in
- Motherboards
- Intel
- MSI
- Gigabyte
- ASRock
- EVGA
- Asus
- NZXT
- Supermicro
- Z390
ASUS TUF Z390M Pro Gaming & Z390M Pro Gaming Wi-Fi
The TUF Z390M Pro Gaming is the smaller mATX sibling of the above ASUS Z390 Pro Gaming and as a result, features much of the same black and grey design with yellow accents. The main differences between the ATX and mATX sized TUF Pro Gaming motherboards are the smaller model has two full-length PCIe 3.0 slots which run at x16 or x8/x4 and ASUS has only included one PCIe 3.0 x1 slot. The maximum memory the Z390M Pro Gaming supports is DDR4-4266 and the board does offer four RAM slots with a maximum support capacity of up to 64 GB.
Storage capability on the TUF Z390M Pro Gaming M.2 PCIe 3.0 x4 and SATA supported slots with one of the slots being supplemented with an M.2 heatsink. This mATX sized board keeps all six SATA ports which are split into two different sections; three straight-angled ports at the bottom right-hand edge of the board, with three right-angled ports on the right-hand side underneath the 24-pin ATX motherboard power input.
ASUS TUF Z390M Pro Gaming (WI-Fi) Rear Panel
With the only differences between the TUF Z390M Pro Gaming and Z390 Pro Gaming (Wi-Fi) being the latter has an Intel 9560 2T2R Wave 2 supported 802.11ac adapter; take this out of the equation and the rest of the rear panel and specifications are exactly the same. A total of six USB ports comprised of one USB 3.1 Gen2 Type-A, one USB 3.0 Type-C and four USB 3.0 Type-A ports is featured, as well as HDMI and DisplayPort video outputs. A pair of PS/2 ports with one for a keyboard and the other for a mouse sitting at the left-hand side of the rear panel, an Intel I219V Gigabit controlled LAN port and basic three 3.5 mm port powered Realtek S1200A HD audio codec completes the capacity of the panel.
The ASUS TUF Z390M Pro Gaming pricing us yet to be revealed but it's expected that the TUF Z390M Pro Gaming Wi-Fi will command a higher premium with an Intel 9560 MU-MIMO Wave2 Wi-Fi adapter included. The pairing of mATX form factor boards aims at the lower end of the mid-range segment and without too much going on, users looking for a more comprehensive mATX board may look to the more expensive ROG Maximus XI Gene or another competitors offering.
Facebook
Twitter
RSS
79 Comments
View All Comments
Smell This - Tuesday, October 9, 2018 - link
Much.Of.
The.
Same.
2 HSIO lanes per Gen 2 port and WiFi. Wow (rolling I-eyeballs) ...
MadAd - Tuesday, October 9, 2018 - link
58 motherboards, only 13 of which are smaller than ATX. When on earth are we going to move off this outdated oversized format? Its just more of the same every time, so depressing.gavbon - Wednesday, October 10, 2018 - link
13 is better than 0, or 12 :DMadAd - Wednesday, October 10, 2018 - link
Considering very small form formats (ITX) are harder to build for and only 7 are uATX, a size which is the most useful to transition away from ATX then no, it feels like an afterthought from a lazy industry. I mean who uses more than 1 main video card and 2-4 sticks of ram in a gaming PC these days? Even water builds into uATX isnt that hard to accomplish.After literally decades ATX should be a choice for edge cases not a mainstream build.
shaolin95 - Monday, October 22, 2018 - link
who cares about midge boards!Edkiefer - Wednesday, October 10, 2018 - link
All these MB with 2x 8 pin power inputs, is both mandatory and if so I guess new PSU will need 2x 8pin now.entity279 - Wednesday, October 10, 2018 - link
so it's ok to just buy SM motherboards now with them being involved in a security scandal?gavbon - Thursday, October 11, 2018 - link
I currently have the Supermicro C9Z390-PGW awaiting to go on the test bench next week, so from a consumers standpoint, I could potentially shed light on that board. As far as the Chinese/Supermicro/Spy scandal goes, I don't want to speculate without the finer details.eastcoast_pete - Wednesday, October 10, 2018 - link
Ian & Gavin, thanks for the overview.@ both - Question: I've read that Intel, to deal with its bad planning/capacity problems on 14 nm, has contracted the fabbing of some of its chipsets out to TSMC, specifically in TSMC's 22 nm tech. Is that correct, and did you have a chance to confirm that the new 390s used by these boards are indeed made by Intel on their 14 nm FinFET tech, or are they made by a contractor (TSMC)?
DanNeely - Wednesday, October 10, 2018 - link
AFAIK the chipsets being reverted to 22nm are using Intel's 22nm process in old unupgraded fabs. Doing so would be far less work than porting to a process from a different company; the latter would require massive rework to follow a completely different set of design rules.