Intel Z390 Motherboard Overview: 50+ Motherboards Analyzed
by Ian Cutress & Gavin Bonshor on October 8, 2018 10:53 AM EST- Posted in
- Motherboards
- Intel
- MSI
- Gigabyte
- ASRock
- EVGA
- Asus
- NZXT
- Supermicro
- Z390
ASUS TUF Z390M Pro Gaming & Z390M Pro Gaming Wi-Fi
The TUF Z390M Pro Gaming is the smaller mATX sibling of the above ASUS Z390 Pro Gaming and as a result, features much of the same black and grey design with yellow accents. The main differences between the ATX and mATX sized TUF Pro Gaming motherboards are the smaller model has two full-length PCIe 3.0 slots which run at x16 or x8/x4 and ASUS has only included one PCIe 3.0 x1 slot. The maximum memory the Z390M Pro Gaming supports is DDR4-4266 and the board does offer four RAM slots with a maximum support capacity of up to 64 GB.
Storage capability on the TUF Z390M Pro Gaming M.2 PCIe 3.0 x4 and SATA supported slots with one of the slots being supplemented with an M.2 heatsink. This mATX sized board keeps all six SATA ports which are split into two different sections; three straight-angled ports at the bottom right-hand edge of the board, with three right-angled ports on the right-hand side underneath the 24-pin ATX motherboard power input.
ASUS TUF Z390M Pro Gaming (WI-Fi) Rear Panel
With the only differences between the TUF Z390M Pro Gaming and Z390 Pro Gaming (Wi-Fi) being the latter has an Intel 9560 2T2R Wave 2 supported 802.11ac adapter; take this out of the equation and the rest of the rear panel and specifications are exactly the same. A total of six USB ports comprised of one USB 3.1 Gen2 Type-A, one USB 3.0 Type-C and four USB 3.0 Type-A ports is featured, as well as HDMI and DisplayPort video outputs. A pair of PS/2 ports with one for a keyboard and the other for a mouse sitting at the left-hand side of the rear panel, an Intel I219V Gigabit controlled LAN port and basic three 3.5 mm port powered Realtek S1200A HD audio codec completes the capacity of the panel.
The ASUS TUF Z390M Pro Gaming pricing us yet to be revealed but it's expected that the TUF Z390M Pro Gaming Wi-Fi will command a higher premium with an Intel 9560 MU-MIMO Wave2 Wi-Fi adapter included. The pairing of mATX form factor boards aims at the lower end of the mid-range segment and without too much going on, users looking for a more comprehensive mATX board may look to the more expensive ROG Maximus XI Gene or another competitors offering.
Facebook
Twitter
RSS
79 Comments
View All Comments
gavbon - Tuesday, October 9, 2018 - link
Thank you Hickory, will update now; this information wasn't available to us at the timebill44 - Tuesday, October 9, 2018 - link
All this boards, but only 1 with Thunderbolt 3. Looks like Thunderbolt 3 is dead (free or not).Type C ports and HDMI 2.0 is in short supply too.
Hopefully next year, we can have two or more USB C (maybe even 3.2), HDMI 2.1, PCIe 4/5 and Thunderbolt 3/4 (Titan Ridge?). Or maybe not, just the same old things hoping for 2020/21.
DanNeely - Tuesday, October 9, 2018 - link
There's no licensing fee for TB, the controller chip itself still costs money (IIRC $20 or $30) and still eats 4 PCIe lanes. Worse, IIRC to make the video out feature work they need to be CPU lanes; meaning that adding it means your main GPU slot is an x8, and the secondary one only x4.gavbon - Tuesday, October 9, 2018 - link
Yeah it's a case of certain vendors opting to dismiss including TB3 ports, which only seems sensible on mini-ITX boards where PCIe lanes aren't too much of an issue. Consumer choice is important though and I'm still glad ASRock has included it; it could be a key buying decision for some!gamingkingx - Friday, October 12, 2018 - link
Just too bad it is only wired as a x2.. And it is wired into the chipset as far as I am aware, so you are gonna max out your I/Os pretty fast.bill44 - Wednesday, October 10, 2018 - link
Sure, anything you add will cost something. The are plenty of non-gamers who prefer TB3 vs x16.This also highlights how old current PC architecture is. Either we need more PCIe lanes, or faster lanes. Otherwise, all advances will be hindered.
Up to 6 USB 3.1 Gen 2 ports? You’ be lucky to get 4. Why can’t we have 6 Gen2 ports and the rest Gen1 an no antiquated USB 2.0? PCIe resources.
All new peripherals use Type C, but this boards generally give you only 1 (saving money on redrivers). USB 3.2 (20 Gbps)? When it comes around, ithis too will need more PCIe lanes. M.2. PCIe 3.0 x4? All lanes are maxed out; the only way forward is faster lanes.
In the past, Gigabyte was a TB3 champion including the functionality on many of their boards. Now, not a single one.
Cost saving by motherboard makers? Prioritising gamers? Or simply no demand for TB3.
The outcome is the same.
repoman27 - Thursday, October 18, 2018 - link
Intel merely said that they planned "to make the Thunderbolt protocol specification available to the industry under a nonexclusive, royalty-free license" sometime this year. This hasn't happened yet, and is referring to the protocol spec, not the silicon that Intel produces. If and when they decide to do this, ASMedia or whoever could then begin development of their own Thunderbolt controllers. This means that third-party controllers probably won't appear in shipping products until sometime in 2023.As for the currently available Thunderbolt 3 controllers, tray prices range from $6.45 to $9.10. But you also need a USB Type-C and PD controller, power switch, and high-speed mux which runs around $4.59, plus the connector and a few other bits. I don't believe Intel charges a royalty on finished Thunderbolt products, but they do require licensing and certification which are paid for by the OEM and may add significant cost to relatively low-volume products.
AFAIK, Windows PCs are still required to connect Thunderbolt controllers via the PCH. Apple is the only one using PEG lanes for Thunderbolt, and they don't do that on the 27-inch iMacs where it might adversely impact the GPU.
Dug - Tuesday, October 9, 2018 - link
I hope it's not dead. Far more useful than USB C. I would be fine with USB C except there doesn't seem to be a good USB C to USB C hub, which really restricts how many devices you can use. I'm really glad to see it on ASRock itx board so I can attach a portable SSD array.imaheadcase - Wednesday, October 10, 2018 - link
Tons of monitors of USB-C, anker sells USB-C hubs, I don't think i've seen thunderbolt in a desktop PC to date though. That best part of USB-C is being able to just plug phone into it and copy paste to desktop files (no Microsoft didn't invent that, it was always that way by default in windows)Valantar - Wednesday, October 10, 2018 - link
TB3 is far from dead, it just has little use in desktop PCs. Have you looked at laptop lineups recently? TB3 is _everywhere_. My workplace (a major university here in Norway) has moved entirely to TB3 docking solutions as they're the only full-featured and universal(-ish) solution.eGPUs are useless on desktops. Desktops don't need docks. USB 3.1 is plenty fast for external storage, and if you need faster storage, desktops can fit that internally. The only real use cases for TB3 on a desktop are TB3 networking (for fast direct transfers between PCs) and adding things like extra NVMe or >GbE networking on ITX boards that don't have room for that and a GPU.