ASUS ROG Strix Z390-F Gaming

The ASUS ROG Strix Z390-F Gaming has a very similar feature set to the Strix Z390-E gaming with the main differences coming in integrated networking capabilities and in that the Strix Z390-F Gaming only has a single M.2 heatsink included. Visually it’s expected the Strix Z390-F as similar visuals to the Z390-E Gaming model, with only minor visual adjustments between the two gaming-focused models with a single M.2 heatsink (as opposed to two) and the lack of an integrated Wi-Fi adapter.

Specifications wise the ROG based Z390-F Gaming model has support for two-way SLI and three-way CrossFire multi-graphics card support thanks to three-full length PCIe 3.0 slots which operate at x16, x8 and x4; accompanying these are three further PCIe 3.0 x1 slots. The storage capabilities are identical to the Z390-E Gaming with two PCIe 3.0 x4 capable M.2 slots, with only one offering SATA support; the main difference is the Strix Z390-F Gaming has a single M.2 heatsink. The Strix Z390-F Gaming has six SATA ports in total which support RAID 0, 1, 5 and 10 arrays. There are four available RAM slots which support DDR4-4266 and with up to a maximum of 64 GB in total.

What we do know about the rear panel is that it has a single LAN port powered by an Intel I219V Gigabit controller and five 3.5 mm jacks, with a single S/PDIF optical output which takes direction from a SupremeFX S1220A HD audio codec. Also included are three USB 3.1 Gen2 Type-A ports, one USB 3.1 Gen2 Type-C port, a DisplayPort and HDMI video output too.

The current availability and pricing of the ASUS ROG Strix Z390-F are currently unknown, but as more details and information becomes available, we will ensure to keep this section updated.

ASUS ROG Strix Z390-E Gaming ASUS ROG Strix Z390-H Gaming
Comments Locked

79 Comments

View All Comments

  • gavbon - Tuesday, October 9, 2018 - link

    Thank you Hickory, will update now; this information wasn't available to us at the time
  • bill44 - Tuesday, October 9, 2018 - link

    All this boards, but only 1 with Thunderbolt 3. Looks like Thunderbolt 3 is dead (free or not).
    Type C ports and HDMI 2.0 is in short supply too.

    Hopefully next year, we can have two or more USB C (maybe even 3.2), HDMI 2.1, PCIe 4/5 and Thunderbolt 3/4 (Titan Ridge?). Or maybe not, just the same old things hoping for 2020/21.
  • DanNeely - Tuesday, October 9, 2018 - link

    There's no licensing fee for TB, the controller chip itself still costs money (IIRC $20 or $30) and still eats 4 PCIe lanes. Worse, IIRC to make the video out feature work they need to be CPU lanes; meaning that adding it means your main GPU slot is an x8, and the secondary one only x4.
  • gavbon - Tuesday, October 9, 2018 - link

    Yeah it's a case of certain vendors opting to dismiss including TB3 ports, which only seems sensible on mini-ITX boards where PCIe lanes aren't too much of an issue. Consumer choice is important though and I'm still glad ASRock has included it; it could be a key buying decision for some!
  • gamingkingx - Friday, October 12, 2018 - link

    Just too bad it is only wired as a x2.. And it is wired into the chipset as far as I am aware, so you are gonna max out your I/Os pretty fast.
  • bill44 - Wednesday, October 10, 2018 - link

    Sure, anything you add will cost something. The are plenty of non-gamers who prefer TB3 vs x16.
    This also highlights how old current PC architecture is. Either we need more PCIe lanes, or faster lanes. Otherwise, all advances will be hindered.

    Up to 6 USB 3.1 Gen 2 ports? You’ be lucky to get 4. Why can’t we have 6 Gen2 ports and the rest Gen1 an no antiquated USB 2.0? PCIe resources.
    All new peripherals use Type C, but this boards generally give you only 1 (saving money on redrivers). USB 3.2 (20 Gbps)? When it comes around, ithis too will need more PCIe lanes. M.2. PCIe 3.0 x4? All lanes are maxed out; the only way forward is faster lanes.

    In the past, Gigabyte was a TB3 champion including the functionality on many of their boards. Now, not a single one.

    Cost saving by motherboard makers? Prioritising gamers? Or simply no demand for TB3.
    The outcome is the same.
  • repoman27 - Thursday, October 18, 2018 - link

    Intel merely said that they planned "to make the Thunderbolt protocol specification available to the industry under a nonexclusive, royalty-free license" sometime this year. This hasn't happened yet, and is referring to the protocol spec, not the silicon that Intel produces. If and when they decide to do this, ASMedia or whoever could then begin development of their own Thunderbolt controllers. This means that third-party controllers probably won't appear in shipping products until sometime in 2023.

    As for the currently available Thunderbolt 3 controllers, tray prices range from $6.45 to $9.10. But you also need a USB Type-C and PD controller, power switch, and high-speed mux which runs around $4.59, plus the connector and a few other bits. I don't believe Intel charges a royalty on finished Thunderbolt products, but they do require licensing and certification which are paid for by the OEM and may add significant cost to relatively low-volume products.

    AFAIK, Windows PCs are still required to connect Thunderbolt controllers via the PCH. Apple is the only one using PEG lanes for Thunderbolt, and they don't do that on the 27-inch iMacs where it might adversely impact the GPU.
  • Dug - Tuesday, October 9, 2018 - link

    I hope it's not dead. Far more useful than USB C. I would be fine with USB C except there doesn't seem to be a good USB C to USB C hub, which really restricts how many devices you can use. I'm really glad to see it on ASRock itx board so I can attach a portable SSD array.
  • imaheadcase - Wednesday, October 10, 2018 - link

    Tons of monitors of USB-C, anker sells USB-C hubs, I don't think i've seen thunderbolt in a desktop PC to date though. That best part of USB-C is being able to just plug phone into it and copy paste to desktop files (no Microsoft didn't invent that, it was always that way by default in windows)
  • Valantar - Wednesday, October 10, 2018 - link

    TB3 is far from dead, it just has little use in desktop PCs. Have you looked at laptop lineups recently? TB3 is _everywhere_. My workplace (a major university here in Norway) has moved entirely to TB3 docking solutions as they're the only full-featured and universal(-ish) solution.

    eGPUs are useless on desktops. Desktops don't need docks. USB 3.1 is plenty fast for external storage, and if you need faster storage, desktops can fit that internally. The only real use cases for TB3 on a desktop are TB3 networking (for fast direct transfers between PCs) and adding things like extra NVMe or >GbE networking on ITX boards that don't have room for that and a GPU.

Log in

Don't have an account? Sign up now