While we normally don’t cover China-only smartphone releases, Xiaomi is a fairly major player as far as volume as they were one of the first companies in the industry to ship high-end hardware for mid-range prices. We also tend to see that these devices eventually filter out to a more global launch, which The Xiaomi Redmi line has been a solid success pretty much anywhere it shipped, and today Xiaomi launched an update to their Redmi Note line, the Redmi Note 4.

At a high level the Redmi Note 4 is shipping with fairly aggressive specs for the price, which starts at 135 USD for the model with 2GB of RAM and 16GB of internal storage, and 180 USD for the model with 3GB of RAM and 64GB of internal storage.

There’s also a micoSD slot so the 16GB internal storage isn’t necessarily the end of the world.

All SKUs ship with MediaTek’s Helio X20 SoC, but instead of a 2.5 GHz Cortex A72 at the high end it looks like Xiaomi is shipping a 2.1 GHz variant which could either be downclocked deliberately to reduce peak power consumption or a cost saving measure. To try and push for as much battery life as possible, Xiaomi has also shipped a 15.7 WHr battery in this device or 4100 mAh which is probably partially to offset the use of an SoC on a planar 20nm process, and also because most of the people buying phablets are likely doing so due to the battery life benefits. This battery is charged through conventional quick charge at 10W, so charge time may be a bit on the long side but I wouldn’t be surprised if this is a move to improve battery longevity and meet the fairly tight cost target.

The display is a 5.5 inch 1080p unit with a claimed maximum brightness of 450 nits, contrast ratio of 1000:1, and sunlight display technology similar to Apical’s Assertive Display which dramatically improves outdoor visibility beyond what you might expect from a display of that brightness. There’s a mention of 72% NTSC gamut which leads me to believe that this is targeting sRGB fairly well depending upon display settings similar to the Mi Note and Mi Note Pro.

The rear camera is a 13MP unit with PDAF and the front facing camera is a 5MP sensor. Both have an f/2.0 aperture but I don’t really see any mentions of the supplier of the module or sensor here. I suspect that this is going to be a Samsung ISOCELL sensor or something similar on the rear but absent actual data this is just a wild guess.

As far as connectivity goes 802.11a/b/g/n/ac, WiFi Direct, and Bluetooth 4.2 are supported. There’s no explicit discussion of NFC connectivity but seeing as how Mi Pay and AliPay is supported as an NFC-based mobile payments service the Redmi Note 4 should support NFC. For cellular connectivity LTE category 6 and VoLTE are supported, and looking at Xiaomi’s page it looks like GSM bands 2/3/8, WCDMA bands 1/2/5/8, TD-SCDMA bands 34/39, FDD-LTE bands 1/3/5/7/8, and TD-LTE bands 38/39/40/41 are supported for this specific variant. There’s also a mention of support for CDMA2000/1X BC0 which is interesting to see. Dual SIM is supported but when using two SIMs it isn’t possible to use microSD. GPS, GLONASS, and Beidou are supported as GNSS constellations, and there’s an IR port, gyro, accelerometers, proximity sensors, ambient light sensor for auto brightness, and a magnetic hall sensor for things like flip covers. All of this is packaged into a phone that is 151x76x8.35mm and weighs 175 grams, which is actually fairly impressive considering its size, the aluminum unibody, and 15.7 WHr battery. The only real spec out of place at a high level is the lack of USB-C reversible connector, but microUSB is acceptable given the price.

Putting aside the specs, this is actually looking to be a fairly promising phone. We can talk about whether Xiaomi is copying Apple or not, but the Redmi Note 4 seems to have a fairly unique design due to its rear camera placement and the use of a large circular lens somewhat reminiscent of HTC designs, but combines with a dual color LED mounted just below the camera and a fingerprint scanner that appears to be identical in shape to the camera lens between the two. The design of the Redmi Note 4 looks great considering the price, and there’s some irony in that for all of the marketing bluster surrounding the Note7’s symmetrical design, the Redmi Note 4 has visibly better overall ID detailing and overall symmetry. The use of the 2.5D glass, chamfered edges, and slightly curved back should also make for solid ergonomics while allowing for things like tempered glass screen protectors. The fingerprint scanner also is said to be one that allows for learning such that it extends the map of your fingerprints over time to allow for faster, more reliable use. MIUI 8 also has some interesting new features such as the ability to enter either a standard or private user mode depending upon the password/PIN/pattern you enter similar to a KNOX secure folder.

Overall, the Redmi Note 4 from a distance looks to be a fairly impressive phone. It wasn’t all that long ago that things like aluminum unibody design, fast-focusing rear cameras, high quality, high density displays, and fingerprint scanners were impossible to find in a single package for a phone under 200 USD, and Xiaomi has managed to ship a phone with all of these things. It’ll be interesting to see how they manage the transition for the Redmi Note 4 to a global audience, which would likely mean a Qualcomm SoC and new RF front-end, but it’ll be interesting to see all the same. The Xiaomi Redmi Note 4 will be available in China in silver, gold, and gray, and the 2/16GB variant will retail for 899 RMB or 135 USD, and the 3/64GB variant for 1199 RMB or 180 USD.

Source: MIUI Forums/Xiaomi

POST A COMMENT

34 Comments

View All Comments

  • BMNify - Thursday, August 25, 2016 - link

    Xiaomi *sold 1.75 Million Reply
  • StormyParis - Thursday, August 25, 2016 - link

    Re: supported bands, Xiaomi usually releases "World"' versions of their phones with support for more bands than the China versions, and Google Play et al pre installed.
    for example, for previous Redmi Note 3 Pro - International Version: http://www.geekbuying.com/item/Xiaomi-Redmi-Note-3...
    Reply
  • serendip - Thursday, August 25, 2016 - link

    Are there physical differences between the models? Usually it's possible to flash MIUI China and Global ROMs on the same phone.

    On the Note 3 Pro, Xiaomi had a Taiwan special edition that added support for different LTE bands and had a MIUI Marshmallow-based release. It's a unicorn model though, most Note 3 Pros sold outside China (mainly in India) are the same model as the China-market variant.
    Reply
  • implantedcaries - Friday, August 26, 2016 - link

    The cpu update over the snapdragon version will be pretty unmeaningful, but it will be a substantial upgrade over the mediatek version of the note3 which ships with a helio x10 processor...
    The only thing that's really worrying is, the note4 uses only 4 cores of the Mali880 GPU. I don't think 4 cores of the Mali 880 GPU will have comparable graphical rendering power as the adreno 510. Of course if they plan on releasing snapdragon version of the rest of the world , I won't be complaining if they put in the 1.8ghz 820 for $135 USD :D
    Reply
  • vidal6x6 - Thursday, August 25, 2016 - link

    My redmi note 3 has bricked 3 week. don't have any support the chinese programs don't work. i dont recommend this shit to anyone. Reply
  • Pissedoffyouth - Friday, August 26, 2016 - link

    how the hell did you brick it? You must have done something stupid like force-unlocked the bootloader without doing it the official way Reply
  • qlum - Friday, August 26, 2016 - link

    Nice how the 4th picture is clearly a intel (desktop cpu) and not the MediaTek’s Helio X20. Mobile soc's don't use an ihs like this. Reply
  • tipoo - Friday, August 26, 2016 - link

    Hardly a hard and fast rule:

    http://www.theipadguide.com/images/content/apple-a...
    Reply
  • romanat - Friday, August 26, 2016 - link

    At Geekbuying they already have them for $239, not bad. Reply
  • jjj - Friday, August 26, 2016 - link

    The X20/X25 has 3 versions.
    X25 is MT6797T with A72 at 2.5Ghz while X20 is MT6797 with clocks at 2.3GHz and MT6796m at 2.1GHz. The GPU clocks also differ but you can figure those out yourself.

    The best value are still 360 Mobile N4 and N4S and the big weakness for this device is the RAM. They really should have 3GB for the base model, even if at higher price.

    As for using Qualcomm for a global version why? MTK has CDMA2000 support, they can cover anything that is needed. Sure in India the patent trolls arranged for Xiaomi to be forced to use Qualcomm, funny how that just happened and regulators don't notice.
    Reply

Log in

Don't have an account? Sign up now