Crysis 3

Still one of our most punishing benchmarks 3 years later, Crysis 3 needs no introduction. Crytek’s DX11 masterpiece, Crysis 3’s Very High settings still punish even the best of video cards, never mind the rest. Along with its high performance requirements, Crysis 3 is a rather balanced game in terms of power consumption and vendor optimizations. As a result it can give us a good look at how our video cards stack up on average, and later on in this article how power consumption plays out.

Crysis 3 - 2560x1440 - Very High Quality + FXAA

Crysis 3 - 1920x1080 - Very High Quality + FXAA

Whereas Battlefield 4 was rather forgiving to the GTX 1060 at even 1440p, Crysis 3 is the opposite. While over 30fps, 42fps leaves a long way to go before hitting the all-important 60fps fluidity mark for this FPS. At 1080p on the other hand it has no trouble sustaining over 60fps. This does, however, end up being one of the only games where GTX 1060 isn’t neck-and-neck with GTX 980. Even the factory overclocked ASUS card is a bit off of GTX 980, though it’s still 4% ahead of the stock GTX 1060.

Compared to the GTX 1070 then, the GTX 1060 delivers fairly typical performance at 73% of its faster sibling. Versus GTX 960 this is a 71% performance gain, which is actually the smallest performance gain we’ll see throughout our entire benchmark suite. On which note, looking farther down the charts we have to compare GTX 1060 against GTX 660 to find a better than 2x performance increase.

Finally, against the RX 480, GTX 1060 once again delivers a 14% performance gain versus its closest competition.

Battlefield 4 The Witcher 3
Comments Locked

189 Comments

View All Comments

Log in

Don't have an account? Sign up now