ABOUT BENCH FORUMS PODCAST LOGIN REGISTER
PC Components▼
Smartphones & tablets▼
Systems▼
ENTERPRISE & IT
GUIDES▼
DEALS

Clash of the Titans - TT Tai Chi vs. CM Stacker 830

 by Joshua Buss on February 23, 2006 12:05 AM EST
55 Comments | Add A Comment
55 Comments
Cooler Master Stacker 830

Cooler Master's first Stacker received huge praise from the community for an abundance of space and a wealth of options in terms of how to place components inside the case. The 830 continues these traits, but extends them with a more stylish design and additional options aimed at making this a truly enthusiast-friendly case.


Click to enlarge.

While the Tai Chi is one of most massive cases that we've worked with lately, the Stacker 830 puts up a good fight. The case is extremely deep, with a total front-to-back measurement of 25½”. This is 4” longer than the Tai Chi – however, with the casters, the Thermaltake case is two feet tall - 3” taller than the Cooler Master. With the same relative size, but a significant difference in the two main dimensions, users will have to take care in selecting a unit that will fit where they intend to put their computer. Neither unit is that well suited for being on a desk, but with the flared feet, the Stacker might not look too bad.


Click to enlarge.

In this shot of the front, most of the various materials that make up the case are visible. Brushed aluminum is the predominant finish, but black painted steel, gray plastic, and a slightly darker gray plastic (now black plastic on many units) are all present as well. The front mounted ports are at the top, but face forward, and unlike the X1 reviewed last month, they don't get covered up when the door is closed. The recessed area above that is actually the front handle, and slightly in front of that is where the power button is located.


Click to enlarge.

The front-and-center Cooler Master logo is very nicely made - it was difficult to capture the real look of it, but this close up does a pretty good job. Overall, the fit and finish of the 830 is fantastic just like the logo. This is a stately case for the serious enthusiast just like the Tai Chi, but the approach to get to this feeling is pretty different.

The main design aspect that sets the cases apart is how complex the styling is. Where the Tai Chi is very monolithic, the new Stacker has quite a few intricacies and a whole lot of functionality. When the main door is open, some of this complexity is revealed.


Click to enlarge.

Like the Tai Chi and other similar cases, the 830 has many external 5¼” bays accessible externally, but only nine as opposed to the Tai Chi's eleven. Another difference is that the covers are vented in this case, and each one has a second filter behind the metal grill as well. The covers hold themselves in place very loosely, but aluminum flaps span the height of the case to provide additional holding power.

This next shot turned out much better as a collage of three separate pictures, and serves to show how these flaps and the front ports look up close.


Click to enlarge.

In this shot, we've opened the main door and left flap too, and towards the far right, the spring-loaded latch that keeps the door on its hinges is visible as well. Notice the ample spacing between ports and intricate molding of the plastic. Overall, this is one of the most unique port clusters that we've seen yet in terms of visual appeal, and although it might not appeal to everyone, its functional design is hard to criticize.


Click to enlarge.

Viewed from a more perpendicular angle, the layout of the top panel is easier to get a sense of. Two more USB 2.0 ports, the de-emphasized reset switch, and HDD activity LED are present along with the blue backlit power button. Cooler Master's choice to label these elements is certainly an issue of taste, but at least the font that they used is futuristic and consistent with the theme of the case.

Thermaltake Tai Chi (cont’d) Cooler Master Stacker 830 (cont’d)
PRINT THIS ARTICLE
Comments Locked

55 Comments

View All Comments

  • tscholz - Sunday, April 30, 2006 - link

    As for cooling, these cases are some of the most stupid designs i have ever seen. What are all those meshes doing on the stacker, but ruining the cooling performance. The proper way to cool a case is by using vacuum, and not by sucking or blow huge amounts of air in and out from all directions. A case should have one air intake (might be a few smaller ones), and one output. Only one fan is needed on the output, since it creates the vacuum to suck new air in from the input intake(s).

    And as for the Tai Chi, no those fancy fans on the sides does not do much (if anything) for the cooling. The energy transfer rate from the air inside to the alu casing is very little, and does not match the effects of fresh air constantly moving through tha case. The only thing these fans will do, is to collect dust.

    There is no doubt that the interior of these cases are cool then full of fans, but why use that many when you don't have to?! More fans equal more noise, and does not make it that much cooler.

    For reference, my case has a total of 2 fans (3 if you count graphics), one in the PSU, and one in the back that cool CPU and keeps air flowing through the casing. I blocked off all those extra holes in the back and front, to make sure that the air flows past the HD's, over the chipset, through my Thermaltake Tower 112 (damn it's big), and finally blown out the back. At a room temp. at 23 °C, the interior and CPU temp is 32 °C idle (53 °C load).

  • seanp789 - Saturday, March 18, 2006 - link

    alot fo people are wondering if these things really work and there are debates on both sides.

    I bought the case recently and have come to this conclussion.

    A typical heatsink is in direct contact with the heat source. The tai chi case only comes in contact with air for the most part. Now there is no doubt that there is hot air inside your case. The longer your case is running at full load the more of an effect that hot air has on surrounding components. While its true that air is less conductive that a directly contact, the massive surface area the case provides as a heatsink is what allows it to be so effective.

    For doubters, take this simple test I did. Use a blow dryer to heat the side of your case, then use a blow dryer on the tai chi case. you will find that the tai chi cools itself much faster than a normal case. While i didnt take exact temps I timed the dryer exposure time and relatively how long each case took to cool.

  • chynn - Thursday, March 2, 2006 - link

    After you can mount an ATX motherboard in the motherboard tray, you can use either the left (normal) or right (inverted) case slots to insert the tray.

    You can relocate the four fan array to either side of the case.

    You can change the side the front door is mounted to, which is great for left-handed people like me.

    You have to screw down all components mounted in the 5.25in bays with the provided screws. The snap locks are there only for positioning and/or testing purposes.

    The stock fans are noisy, sleeve bearing, and low MTBF units. Not good for this costly a case. OTOH, the fans in the ThermalTake might be just as bad ... :)

  • JoshuaBuss - Monday, May 15, 2006 - link

    Actually the front door can't be turned upside down so that it opens the other way. I tried.. it doesn't fit.

    The snap locks work fine for permanent mounting...?

    The stock fans I received are VERY quiet, even at 12v.

  • fsardis - Thursday, March 2, 2006 - link

    do you even own the case? have you even heard the fans? FYI they are both inaudible and i speak from first hand experience cause i own the thing.
    just because it has a sleeve bearing doesnt mean its noisy.

  • Systemshocked - Wednesday, March 1, 2006 - link

    I purchased an Armor case last year, and my one gripe about the case is the tool-less expansion card clamp (that green and purple thing in Anandtech's photos). It's flimsy, and it didn't fit with my Geforce 6800 GT video cards. So I removed it.

    So much worthless processed hydrocarbon in my opinion.

    And I wouldn't trust it to hold my cards in place if you're planning on transporting the case anywhere.

    My two cents.

  • seanp789 - Monday, February 27, 2006 - link

    the specs measure the tai chi at 600mm or a little less than 2 feet. I woudl like to if height is measured with or without wheels and handles. because the clearance below my desk is right on the borderline and im afraid the handles will make it not fit.

  • r33tr33t - Sunday, February 26, 2006 - link

    Why doesn't AnandTech review the Zalman Totally No Noise Series?

    The TNN 500AF is more expensive than either of these cases and probably has competitive build quality.

  • Aikouka - Sunday, February 26, 2006 - link

    I was wondering if you'd use some possible higher enthusiast (or just tests for plain looney people). What I mean by this is for example, I am in the market for a new case right now, because I currently have 5 HDDs in my Xaser III V2000A. I built a computer for a friend with a 7800GT SLi configuration and both of his video cards run 20C cooler than my single 6800GT (both being BFG OC cards). His 4800+ runs cooler than my 4400+ and I use a Thermalright XP90C with Arctic Silver V where he used the stuff that came in the box. So, yeah... thermals are why my games sometimes will mess up, but I'm not sure what cases are a good choice.

    Like I said, it's kind of leaning toward enthusiast/looney to do tests where you up the thermal anty, but there are people with multiple hard drives in their machines and for people in predicaments like mine (where their hard drives sit in front of their only intake fans), they're in quite the pickle.

  • chynn - Thursday, March 2, 2006 - link

    So what case are you using, friend??? It would help if we knew ... :)

    For example, one of the reasons I am moving to the RC-830 is that my Lian-Li V1200 case does not cool the SLI graphics cards properly, so the whole case runs hot.

    I have purchased the V1200 "Plus" cooling kit and some 120mm Scythe SFF21F fans though to remedy that problem.

    The Lian-Li has an Asus A8N-SLI Deluxe, FX-55, 2x eVGA 6800GT 256M, 2x 74G WD Raptors and a hard drive in it.

    The RC-830 will have a DFI LanParty UT Expert, FX-60, 2xeVGA 7800GTX ACS3, 2x 150G WD Raptors and a hard drive in it.

    Both cases have a DVD reader/burner and a floppy drive in them.

    From looking at the two cases, the RC-830 has the better cooling solution by far ... even after the Plus kit is installed in the Lian-Li.
Copyright © 2024. All rights reserved.
BENCH
TOPICS
FOLLOW
ABOUT

Log in

Don't have an account? Sign up now