Sunbeam Trio (cont'd)

We can also appreciate this case's ability to hold up to six hard drives in addition to an external 3½”, all of which would be held in place with the removable plastic locks. The very top smaller bay can hold the same sized drive, but must use standard screws to do so.


Click to enlarge.

Looking from the right side of the case, we find the same locks, meaning that while this system is surely easy to use, it does the require the case to be accessible from both sides.

They're a simple enough design, and while other tool-less innovations that we've seen before don't allow for the possibility of missing pieces, this system does have the ability to shift the locks slightly to place drives in several slightly different positions.


Click to enlarge.

Note how the second-from-top lock is locked in place closer to the front than the rest of them, and the lock below that is only partially locked.

To handle the expansion cards without the use of screws, the Trio uses sliding plastic clips. With the help of the protruding pin, these do hold the cards strongly, but it would be better if they slid back further to make putting in new cards that much easier.

Here, the clip holding our video card is almost pushed in all the way, and after it is, it clicks in place letting one know that the card is being held securely.

Here, the included 120mm fan for rear exhaust is featured, along with an included 450 watt power supply.


Click to enlarge.

Overall, the Trio is rather normal in pretty much every aspect of a mid-range tool-less ATX case. A final shot of our installed test system confirms this, as the case has neither ample room nor feels too cramped, and the support for the PSU isn't quite strong enough to keep our PowerStream totally upright, but it certainly isn't loose.


Click to enlarge.


Sunbeam Trio (cont’d) CoolerMaster Centurion 530
Comments Locked

48 Comments

View All Comments

  • Abecedaria - Sunday, September 11, 2005 - link

    What was the criteria for choosing these cases? Most of them look nasty-plasticy and even the Antec P-180, although it looks good, has a veery plasticy feel.

    Where was Silverstone in your review? They have some of the best cases available:
    http://www.silverstonetek.com/product-case.htm">http://www.silverstonetek.com/product-case.htm
    and from their new subsidiary:
    http://www.tuniq.com.tw/Chassis/chassis.htm">http://www.tuniq.com.tw/Chassis/chassis.htm

    These things rock.

    abc
  • unclebud - Monday, September 12, 2005 - link

    please consider reviewing the performance 640 next time?
    it currently includes a smartpower v2 400w, for $129
    thanks in advance
  • Rudee - Saturday, September 10, 2005 - link

    There is an error in the article. The Sonata II does indeed have a removable air filter in the front of the case, thus should not be given a score of "0" for this catagory.
  • Tamale - Saturday, September 10, 2005 - link

    The filter is removable from the bottom of the case only.. while this certainly is 'removable', it is nowhere near as accessible as the other cases which I gave this point to. I struggled with the idea of giving the case .5 for this category, but it wouldn't have made a difference in the end, and I really don't feel that most users would go through the trouble of tipping the case over just to clean the filter, so no points were awarded.

    Thanks for pointing out the detail though.
  • Rudee - Saturday, September 10, 2005 - link

    The Sonata II case is great. I was able to overclock a AMD 64 3700 to 2700mhz using the stock AMD heatsink and fan with one Panaflo 92mm fan in the duct over the CPU. Temps are great and I ended up returning my Zalman 7700 as I didn't need it.
  • dgkulzer - Friday, September 9, 2005 - link

    After 1 month of use I am very happy with my P180. Assembly does take a bit longer than a standard case if you are trying to hide your cables but that isnt much of an issue to me. I put a Phantom 500 PSU in it and because its longer than most other PSU's I had to replace the lower fan with a thinner model (Nexus 120). I have 4 hard drives in the lower chamber and the Nexus at 5 volts keeps them very cool - I havent had the Phantom fan kick on yet either.

    This is one case that looks better in person than it does in pictures, the pictures make it look like a little fridge or something but it looks pretty sweet on your desk :)
  • mschira - Friday, September 9, 2005 - link

    I guess the two compartment design is great for watercooling. You could put the pump reservoir etc in the lower compartment. If something leaks, the electronic is save.
    I think that's great thing...
    M.
    P.S. onla trouble is where to put the power suply...
  • Griswold - Friday, September 9, 2005 - link

    Kids, having a flashy computer under your desk doesnt make the chicks like you more. Say no to stupid side windows!
  • Tamale - Friday, September 9, 2005 - link

    you seem to forget that most kids who think it would look cool to have the window in the first place probably don't care about girls anyway ;)

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool
  • Griswold - Sunday, September 11, 2005 - link

    quote:

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool


    Besides the total lack of EM shielding (which is enough reason to not do what you did, not only because it's not allowed in many countries (I know, I know, US is different, there, the cops wont stop you if your car has only 3 wheels..)), a full acrylic case is a nice show thingie. I just find side windows embarrassing, especially when the rest of the case looks like Optimus Prime's chest armor.

Log in

Don't have an account? Sign up now