Weekly Buyer's Guide: High End System - March 2004
by Evan Lieb on April 2, 2004 11:25 AM EST- Posted in
- Guides
Monitor
Recommendation: Samsung 1100DF 21" (20" viewable) DynaFlat CRTPrice: $460 shipped
Not only does Samsung make a great mid-range monitor with their 955DF series, they make a great high-end monitor with their 1100DF series too. The 1100DF is capable of refresh rates of 75Hz at 2048x1536 and 85Hz at 1280x1024 and has a dot pitch of 0.20mm. Text clarity is very impressive, glare is non-existent, and gaming performance is top-of-the-line.
Alternative: Philips 22" (20" viewable) 202P45 CRT
Price: $497 shipped
The 202P45 is only about $40 more than the 1100DF and its performance is nothing short of outstanding. The 202P45 has features like a max resolution of 2048x1536 @ 80Hz (1600x1200 @ 85Hz) and a 0.25mm dot pitch aperture grille. The aperture grille is what makes this monitor particularly special. Going by its word for word definition, the aperture grille is a series of vertical wires stretched vertically down the inside of a CRT to mask the beams from the electron guns at the back of the tube. What the 202P45's flat aperture grille essentially does is help to minimize the geometric distortion that users will see on increasingly larger screens, like this 22" monitor. With this feature, the 202P45 is basically able to display a more precise and accurate picture with sharp overall text clarity compared to monitors without flat aperture grille technology. Because of this feature, the 202P45 is truly one of the best 22" monitors on the market that doesn't force you to take out a second mortgage on the house.
Computer Case
Recommendation: Kingwin K11 Aluminum ATX casePrice: $70 shipped
Kingwin makes a great aluminum computer case, dubbed their K11 series. Even with all your components installed, the case is still relatively light, even light enough to carry to a LAN party or bring it over to your friend's or family's house. It comes with four 5.25" bays, two external 3.5" bays and five internal 3.5" bays, four USB 2.0 ports, and one Audio, Mic, FireWire port. There are two front fans, one rear fan, and one top fan included as well. As we just suggested, a 360W Enlight power supply is recommended for a system that draws as much power as this one.
For a power supply, we suggest Antec's 400W PSU (SL400) for $55 shipped. It provides stable voltages, a good warranty, fairly quiet operation, low operating temperature, and in general, is reliable and trusted among enthusiasts. Truth be told, a quality 350W or even 300W power supply may do the job just as well, but since the price difference is minimal at best and because this system draws a large amount of power anyway (3400+, 9800 Pro, etc.), you might as well not leave anything to chance.
If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.
Facebook
Twitter
RSS
43 Comments
View All Comments
fedora64 - Monday, April 5, 2004 - link
I have seen soo many reviews talk about how the Via chipset is faster. And for the specific benchmarks used, there is a marginal difference, but then there are the parts most people do not see, and most benchmarks do not cover. The VIA chipset tends to have only one PCI bus in implementation. What that really means is your 10/100/1000 network card, is only a 10/100, since your bus cannot push both IDE and network for large transfers. This is only made worse when using USB/Firewire devices as well. I am certainly not saying that nVidia can do no wrong, they can, and there are many instances where they do, but when it comes down to total system performance, many will find that nforce 3 150 chipset boards will offer noticable performance improvements. Most nforce 3 boards seem to have at least 2 PCI buses some have 3. If you take the gigabyte K8NPro for example, USB IDE and Audio are on a seperate bus from Network and SATA, There is a firewire port on yet another bus. In my case this makes large ssh copies approximately 4x faster getting 6-7MB per second from a VIA chipset board (MSI K8TNeo) and 24-27MB per second from the nForce 3 board (Gigabyte K8NPro).ceefka - Monday, April 5, 2004 - link
#14 Evan, no reason whatsoever, I just liked to suggest it. I think it is a viable alternative. Do you have a problem with Terratec?l3ored - Sunday, April 4, 2004 - link
i dont like that it says the k8v will satisfy overclockers when the reviews i have read on it say it doesnt overclock, as well as the rest of the other athlon 64 motherboards.Ken90630 - Sunday, April 4, 2004 - link
Howdy, Gerbil333: If you don't mind my asking, what components in what high-end computer would require a 430- to 450-watt PSU like you recommend in your post? If you "do the math," as the expression goes, and calculate the wattage needed for devices like those in Evan's recommended system (and even throw in a little headroom for future expansion), neither this system nor even a modestly more demanding one would make any use whatsoever of a 430- or 450-watt PSU. (Unless it's going to be set up in an equatorial rain forest or the Sahara Desert and run at about 60 degress Celsius 24/7 or something!)Do you mind if I ask how you're calculating your recommendation?
Ken
PS: The True Power 430 goes for $99.95 plus tax and shipping on Antec's Web site, which means it would run about $117 to $118 total. (I suppose some Web shopping might turn up a slightly better deal, or you could buy it at a retail store & save the shipping cost.) If dedicated rails, voltage feedback and gold-plated connectors are worth spending this kind of money on a PSU, (and it may very well be for some people building a truly "high end" machine), go for it. I personally would want to see how noisy a TP 430 is before buying, but that's just me (I have to work in a quiet environment).
Nighteye2 - Sunday, April 4, 2004 - link
#31, benchmarks are indeed a good idea to add - but in a seperate article at the end of the month, when the guides gets revised for that month. It would be good to see the different classes of systems with their pricetags compared to eachother in a series of benchmarks.Gerbil333 - Sunday, April 4, 2004 - link
The system doesn't seem nearly high-end enough. I have a 9800 Pro 128mb and an Audigy 2 ZS, and I only consider my system mid-range (the rest of my system is over 9 months old though: A7N8X Deluxe 2.0 w/Athlon XP 2500+, Corsair 512mb TWINX3200LLPT). If you're going to call it high-end, make it high-end! What's with the cheap PSU? I know an Antec 400 will do, but that's not that great. At least get an Antec TruePower of over 430-450W. The case doesn't seem that great, either. I'd spend a lot more than $70 for a case on a "high-end" machine. I paid $88 + $15 for a cathode for my black, aluminum Chieftec -- again, this is a mid-range computer!I'd also like to point out that there is much more than a difference in the number of channels between the Audigy 2 and the Audigy 2 ZS. In my opinion, that's not at all what separates the two models. Notice that the Audigy 2 has a SNR of 106db, whereas the Audigy 2 ZS is rated 108db. You may think 2db doesn't matter much, but if you read a bit about SNR and sound in general, you'll realize that 2db is theoretically a much cleaner signal (less noise).
Ken90630 - Sunday, April 4, 2004 - link
Evan: If you don't mind, I'd like to respectfully comment on your recommended power supply (the Antec SL400) for this system.I'd like to suggest instead either a PC Power & Cooling Model 310ATX (300 watts minimum output) or a Seasonic SuperSilencer 350 (350 watts minimum, 390 peak) instead of the Antec for this system. No, I don't work for either of these companies (or any computer-related company for that matter), but I have been researching PSUs recently for 2 builds I'm planning for myself and I discovered some interesting things.
As Rod Serling used to say, "Submitted for your approval:" If you compare these 3 supplies, you will see that the Antec has a comparatively poor efficiency rating of 68%, no power factor correction, and an MTBF rating of only 50,000 hours (and that's at 25 degrees celsius, which is misleading 'cuz PSUs typically run hotter than that -- more like 40 degrees celsius -- internally). And an output noise rating is nowhere to be found on Antec's Web site or the product box (presumably because it's probably not so quiet?)
By comparison, the aformentioned PCP&C 310ATX has a 74% efficiency rating and 99% power factor correction (which will shave a significant number of dollars off one's electric bills), and a noise level down to a nearly-silent 20dBA (and a still-quiet 32dBA at max load). It's MTBF at 50 degrees Celsius (!) is 100,000 hours, and it has a 3-year warranty. Its regulation specs are within 5% on all rails except for the -12V (basically only used for modems, right?), which is rated at 10% tolerance. The price: $49 plus tax & shipping on their Web site.
Seasonic's SuperSilencer 300- & 350-watt models also, IMHO, seem to beat the Antec. They feature efficency ratings of 80% (!), 99% active power factor correction, they run at a low noise floor of 25dBA during low demand/temp, and also have a 3-year warranty (like the Antec & PCP&C models). And their regulation tolerances are all 5% like the 310ATX (and 10% for the -12V line). The price for the SS300 is about $55-$60, plus tax & shipping.
Now, you may say, "Well, okay, that's all well and good, but the Antec SL400 puts out 400 watts and is a few dollars cheaper." My thoughts on that would be that an extra 4 or 5 dollars is irrelevant when it comes to a system's PSU, and like you say, "a quality 350W or even 300W power supply may do the job just as well." On balance,
I personally think it would be better to have a 300- or 350-watt PSU with the specs & features of the PCP&C or Seasonic models than an inferior PSU with a truly unnecessary 400-watt power output capability that will likely go unused. (And who knows what the output REALLY is at higher temps than 25 degrees C?)
Unless someone has a full tower with half a dozen hard drives, a $400 video card, several GB of RAM, 5 optical drives, dual Xeon processors & a bunch of lighting or something, it seems to me that anything beyond 300 or 350 watts for a PC will be pointless overkill. For awhile now I've been wondering if there is some rational reason why people with 'regular' PCs spend money on 65- or 68%-efficiency, electricity-gobbling, NOISY, gazillion-watt PSUs with often mediocre overall specs and TRUE wattage outputs that fall precipitously at real-world PSU temps. I'm not saying the Antec SL400 is like this (it's probably a decent & reliable PSU overall), but a lot of higher-watt PSUs do appear to be poor investments considering what you really get (and need).
I always enjoy the system guides, by the way. And I like your mention of the Philips monitor -- it is a nice one. Overall, good stuff. Just offering food for thought for anyone in need of a PSU for this type of system. :-)
Ken
PS: I have nothing whatsoever against Antec as a company. It seems to have a good reputation in enthusiast circles, and the dedicated rail & reg tolerance features of the newer True Power series models are appealing (more companies should follow their lead in this area!). Based on the info currently available, it's just my humble opinion that their PSUs are getting beat right now by some of their competitors' models in the middle price range.
pesos - Sunday, April 4, 2004 - link
Pumpkinierre - yes you are correct about raid 1 -- it *can* improve random reads (not always though) because as you say a smart controller can pick and choose which drive to get the info off of. however as you also point out raid 1 will typically give you a small penalty for writes as they must be committed to both disks before the next operation can begin (unless newer controllers have moved beyond this limitation). I'll have to defer to you on raid 0 with lots of drives (I've never used raid 0 with more than 2 drives). i honestly think that with today's drives you're not going to get your money's worth with any raid setup on a desktop machine. IMHO you'd be better off spending the same money on a decent scsi controller and a 15k rpm drive (with a nice large ata drive for storage)...kherman - Saturday, April 3, 2004 - link
As long as their is a valid up grade path for 2+ hard drives, who cares.120 gig is plenty these days. If you need more space later, add another hard drive.
As long as a spare hard drive bay exists, who cares?
Pumpkinierre - Saturday, April 3, 2004 - link
#33 RAID 1 improves random read times with an intelligent controller as it can access two or more drives in parallel. Even RAID 0 with large stripe size (and width ie several drives) can help access time (but may reduce transfer rate).What I want is virtually striped for read RAID 1 ie the controller reads a stripe from each mirrored drive in parallel. As the stripe is virtual not real the controller could vary the stripe size based on the size of the data requested. This would give fast transfer for larger data chunks and fast positioning for smaller files as well as redundancy. The only drawbacks are slower write speeds and <50% capacity efficiency. Given that gamers generally use reads mostly and larger size (80-160GB)HDDs are cheap at the moment, these drawbacks are'nt a great problem. The controller would have to be intelligent but not overly. To my knowledge no one seems to be doing this unless it is one of these hybrids (RAID 1.5?) but being a single drive owner I am not fully au fait with the matter.