Sequential Write Performance

The sequential write test isn't limited to a small span of the disk, as that usually doesn't make a difference for this performance metric. As always, our averages are of the lower queue depths, but scaling to higher queue depths is also investigated. Bulk file copies and recording uncompressed video are the kind of uses that depend on sequential write performance.

Iometer - 128KB Sequential Write

Even at low queue depths, most SSDs can spread a sequential write workload across multiple channels to achieve very high throughput. All of the PCIe drives perform well above the SATA limit but nowhere near the capacity of the PCIe links. The 512GB 950 Pro seems to again be encountering thermal throttling, and more severely than the SM951s we tested.

Iometer - 128KB Sequential Write (Power)

The average power consumption for writes is still on the high side by SATA standards, but is quite reasonable in light of the performance achieved.

Samsung 950 Pro 256GB

Performance across the sequential write test is mostly constant, but power isn't. The declines in power consumption in spite of increased queue depth are again most likely an artifact of whatever background processing is going on in the drive. On SATA drives, it's usually obvious from looking at the power meter when a drive has completed background processing and is truly idle and ready to run the next test, but with the lack of working power management for PCIe drives on our testbed I'm not so sure here. Overall it's probably a good sign that the drives were able to maintain high performance in spite of whatever else was going on, but given more cooling the 512GB can probably do much better.

Sequential Read Performance

Just like the random read test, sequential reads are tested across the span of a full drive and a representative sample of queue depths. Most operations involving large files (typically images and videos) fall under this test's purveiw, but streaming or playing even the highest resolution videos won't be a challenge for any of these drives. Copying files to another SSD or loading a new level in a video game would be more likely to show noticeable difference from better performance here.

Iometer - 128KB Sequential Read

The sequential read performance is probably the best showcase of what the PCIe 3.0 x4 interface can do. The 256GB 950 Pro attains over half of the link speed, but the 512GB is again bogged down by something—relatively speaking, since it's still more than twice the speed of SATA and faster than even the Intel SSD 750. It's possible that the 950 Pro isn't faithfully implementing the secure form of the NVMe format command and some lingering fragmentation is preventing the 512GB drive from performing as specified. Read operations require less power to be supplied to the flash chip than for writes, but if the thermal throttling is all in the controller it could be showing up here as well.

Iometer - 128KB Sequential Read (Power)

Relative to each other, the 950 Pro's power consumption is in line with the performance they're demonstrating, and proportionally much better than the SATA drives.

Samsung 950 Pro 256GB

At queue depth 1, both of the 950 drives are performing similarly. When moving to higher queue depths the 256GB immediately hits 104% of its rated speed, but the 512GB doesn't improve any. (It's worth noting the differing scale for Transfer Rate in the graphs above.) The puzzling decline in power consumption at higher queue depths shows up again on the 256GB and definitely warrants deeper investigation.

Random Performance Mixed Read/Write Performance
Comments Locked

142 Comments

View All Comments

  • ElBerryKM13 - Saturday, November 14, 2015 - link

    If you had $1000 to spend which one would you get? this 950 pro m.2 or intel 1.2TB m.2?
  • srieppo - Monday, December 21, 2015 - link

    Get two 950 in RAID 0. I'm currently running that and it's amazing. What you should put money on depends on your needs though. For gaming SSD is not very important. But I already run 6700k with fast memory and 980TI SLI so was a logical next step.

    1TB of superfast SSD is the last bit. HDD for storage, power options to shut the HDD down when idle (silent) and online backup for important data is the way I like...
  • mapesdhs - Monday, December 14, 2015 - link

    Typo on pp. 9, the word "duplicating" is shown twice, or was that a really late April Fool? :D
  • mapesdhs - Tuesday, December 15, 2015 - link

    Pondering whether to get a 950 Pro 256GB for a SkyLake laptop (MSI GE72 6QF). Despite the glowing benchmark results, it looks as if there would be little gain for real world usage compared to, say, an 850 EVO M.2 which is way cheaper (132 UKP for 500GB, vs. 147 UKP for 950 Pro 256GB), uses less power and thus would afford longer battery life. Edging towards the 850 EVO despite my nerdy addiction to speed...
  • Killerkicker2011 - Wednesday, December 30, 2015 - link

    Would the 950 pro work with my Macbook Pro Late 2013?
  • Quarysma - Saturday, January 16, 2016 - link

    I bought 950 pro but i having trouble rate. My system test results as follows:836 / 806 MB/s read/write.
    My system: Asus Z97m plus, 2*8 Corsair 2400 Mhz. i5-4690K, Corsair h110i, 1000W PSU.

    I wonder why I'm having problems ?

    Thanks for all...
  • robitlgnaz - Tuesday, February 2, 2016 - link

    I have Asus Z97 deluxe with m.2 slot, but supporting only x4 PCI 2.0 (instead of x4 PCi 3.0).
    So on my mobo and yours too this m.2 support only 1.0Gbit or 1.000MB.;(

    I think (and asking) that with PCIe adapter i and you can put that in x8 lanes of PCI 2.0 and get full spedd with that? I have only one graphics card so this is the only way, or?
  • Quarysma - Friday, February 26, 2016 - link

    Either we get PCI-e card or will switch to the DDR4 system. I moved to a DDR4 system.

    I'm ordered DDR4 system and waiting for the parts.
  • yury2808 - Tuesday, April 12, 2016 - link

    Beware! This drive (950 Pro / 512 GB) is terribly slow, if you set your disk to be "compressed" in Win7/10. I used it save my vmware space for years with other SSD drives (intel/samsung/ocz) and never had an issue.
    But yesterday, we got 2x nvme 950 pro and found, that speed is dropping almost immediately to ... 3 MB/s with huge latency.

    I don't know, how their firmware goes around benchmarks (which are all cool for 'incompressible' data) but for real life - this drive get a HUGE hit when OS compress data.

    ps. sure, I have plenty CPU for it, so it's not the case.
  • Redstorm - Saturday, April 23, 2016 - link

    Be aware the new Samsung NVMe driver 1.1 drops performance by about 10% across the board. They should update the article with new perf numbers as its giving a false impression ATM.

Log in

Don't have an account? Sign up now