Sequential Write Performance

The sequential write test isn't limited to a small span of the disk, as that usually doesn't make a difference for this performance metric. As always, our averages are of the lower queue depths, but scaling to higher queue depths is also investigated. Bulk file copies and recording uncompressed video are the kind of uses that depend on sequential write performance.

Iometer - 128KB Sequential Write

Even at low queue depths, most SSDs can spread a sequential write workload across multiple channels to achieve very high throughput. All of the PCIe drives perform well above the SATA limit but nowhere near the capacity of the PCIe links. The 512GB 950 Pro seems to again be encountering thermal throttling, and more severely than the SM951s we tested.

Iometer - 128KB Sequential Write (Power)

The average power consumption for writes is still on the high side by SATA standards, but is quite reasonable in light of the performance achieved.

Samsung 950 Pro 256GB

Performance across the sequential write test is mostly constant, but power isn't. The declines in power consumption in spite of increased queue depth are again most likely an artifact of whatever background processing is going on in the drive. On SATA drives, it's usually obvious from looking at the power meter when a drive has completed background processing and is truly idle and ready to run the next test, but with the lack of working power management for PCIe drives on our testbed I'm not so sure here. Overall it's probably a good sign that the drives were able to maintain high performance in spite of whatever else was going on, but given more cooling the 512GB can probably do much better.

Sequential Read Performance

Just like the random read test, sequential reads are tested across the span of a full drive and a representative sample of queue depths. Most operations involving large files (typically images and videos) fall under this test's purveiw, but streaming or playing even the highest resolution videos won't be a challenge for any of these drives. Copying files to another SSD or loading a new level in a video game would be more likely to show noticeable difference from better performance here.

Iometer - 128KB Sequential Read

The sequential read performance is probably the best showcase of what the PCIe 3.0 x4 interface can do. The 256GB 950 Pro attains over half of the link speed, but the 512GB is again bogged down by something—relatively speaking, since it's still more than twice the speed of SATA and faster than even the Intel SSD 750. It's possible that the 950 Pro isn't faithfully implementing the secure form of the NVMe format command and some lingering fragmentation is preventing the 512GB drive from performing as specified. Read operations require less power to be supplied to the flash chip than for writes, but if the thermal throttling is all in the controller it could be showing up here as well.

Iometer - 128KB Sequential Read (Power)

Relative to each other, the 950 Pro's power consumption is in line with the performance they're demonstrating, and proportionally much better than the SATA drives.

Samsung 950 Pro 256GB

At queue depth 1, both of the 950 drives are performing similarly. When moving to higher queue depths the 256GB immediately hits 104% of its rated speed, but the 512GB doesn't improve any. (It's worth noting the differing scale for Transfer Rate in the graphs above.) The puzzling decline in power consumption at higher queue depths shows up again on the 256GB and definitely warrants deeper investigation.

Random Performance Mixed Read/Write Performance
Comments Locked

142 Comments

View All Comments

  • AnnonymousCoward - Thursday, October 22, 2015 - link

    This 5,600-word review utterly fails to penetrate to the bottom-line answer: the 950 Pro gives virtually zero desktop-usage performance advantage, while costing more than double of SATAIII drives. That only took 17 words.

    http://techreport.com/review/29221/samsung-950-pro...
  • Redstorm - Thursday, October 22, 2015 - link

    Quote: "Lucky for that Samsung 950 Pro SSD or i would never have made that head shot" - said no one ever.
  • PVG - Thursday, October 22, 2015 - link

    I don't want to believe you tested a PCIe 3.0 4x drive on a board with a PCIe 2.0 x2 M.2 socket, so I'm guessing you used some kind of PCIe card adapter hooked up to the 3.0 lanes from de CPU, right?
  • Billy Tallis - Friday, October 23, 2015 - link

    Yep. We're always using the PCIe lanes off the CPU, and with a riser card and adapter that allows for the power measurement.
  • PVG - Saturday, October 24, 2015 - link

    That sounds like a cool setup. You should show it, sometime. ;)
  • zodiacfml - Friday, October 23, 2015 - link

    I'm just impressed with the SM951. All these PCIe drives are not terrible and gives excellent performance over SATA anyway. Their differences are pretty negligible in real world use. The challenge now (esp. for Samsung) is more capacity and lower prices.

    I can't shake the idea of NAS devices with M.2 drives.
  • zodiacfml - Friday, October 23, 2015 - link

    Additionally, NVMe doesn't improve much for the clients. It seems like a specification they added on consumer drives to increase its adoption to benefit their server/enterprise storage products.
  • wyewye - Friday, October 23, 2015 - link

    Billy, you shit the bed: half of graphs are randomly missing Intel 750, the only competing consumer drive.

    However, good job on highlighting the termal issues of 950 Pro.
  • lilmoe - Saturday, October 24, 2015 - link

    Welcome to the world of amazingly consistent charts, brought to you by Anandtech.
  • SyukriLajin - Friday, October 23, 2015 - link

    who knew that storage would require bandwidth as high as a graphic card. just a few years ago, it's the slowest component of your computer.

Log in

Don't have an account? Sign up now