Samsung SM951 (512GB) PCIe SSD Review
by Kristian Vättö on February 24, 2015 8:00 AM ESTSequential Read Performance
Our sequential tests are conducted in the same manner as our random IO tests. Each queue depth is tested for three minutes without any idle time in between the tests and the IOs are 4K aligned similar to what you would experience in a typical desktop OS.
The sequential tests really show the benefit of PCIe 3.0 because the SM951 is approximately three times faster than a SATA 6Gbps drive and provides a ~40% upgrade over the XP941.
 |
|||||||||
The line graph does reveal some anomalies, though. First it looks like the performance scales nicely, but after queue depth of two the performance actually degrades. I'm doing some thermal throttling tests later in the article and it's very likely that the read results are affected by that because I was able to reach 2250MB/s at queue depth of 32 with a cold drive (i.e. I went straight to QD32 without doing the scaling first that heats up the drive).
Sequential Write Performance
Sequential write testing differs from random testing in the sense that the LBA span is not limited. That's because sequential IOs don't fragment the drive, so the performance will be at its peak regardless.
Sequential performance is also great, but seems to be affected by thermal throttling even more. That said, I did reach over 1500MB/s with a cold drive.
 |
|||||||||
Facebook
Twitter
RSS
128 Comments
View All Comments
Kristian Vättö - Sunday, March 1, 2015 - link
The 840 EVO issue takes weeks, even months to show up, so testing it is not something that we can really incorporate in our test suite.The read speed depends on the test you use and its specifications. The figures are always "up to" and tend to be based on high queue depth 128KB sequential read performance. You may want to try multiple benchmarking apps, but especially ATTO tends to show high performance since it tests multiple IO sizes.
And yes, we run the SSD as a secondary drive to eliminate any OS overhead.
MFinn3333 - Saturday, February 28, 2015 - link
Is there any way you can review the Fujitsu FSX 240GB? It's an old drive but it is the only consumer level drive that I am aware of that uses entirely SLC?Kristian Vättö - Sunday, March 1, 2015 - link
At least for now it's not in the review queue, but I will keep it in mind in case I have excess time.kenshinco - Monday, March 2, 2015 - link
How can we get the sm951 to runs up to the rated speed? The rated speed for 512gb is 2.15gbs/1550mbs read/write, but i got only 1560mbs/1570mbs read/write. I got temp monitor never pass 75 when testing.Kristian Vättö - Monday, March 2, 2015 - link
I was able to achieve 2250MB/s with 128KB sequential read (QD32) on an empty drive, which is how the read performance has been rated. That's not a realistic bench, though, because in reality you will never be reading from an empty drive.Gonemad - Thursday, March 5, 2015 - link
No word on Novachips 8TB SSD yet?http://www.theregister.co.uk/2015/03/05/eight_tera...
CallsignVega - Friday, March 6, 2015 - link
I just purchased the SM951 from the UK (512GB for $450). They are out there, you just have to know where to look.vegipiniata - Wednesday, March 11, 2015 - link
I got one SM951 512GB for 340£They were gone later that day.
Have Z97 Extreme9 and can't set it as the boot drive though :(
Bios 1.3 from DEC 2014
any chance it's the BIOS fault (too old)?
Stas - Friday, March 13, 2015 - link
There we go. Finally an incentive to upgrade from 2500k to a new platform. Once mobos with M.2 and NVM hit the market in Summer/Fall, I will be retiring the faithful rig.Edgar_in_Indy - Friday, March 13, 2015 - link
The 2500k is too good to retire!When I upgraded my main system a few weeks ago, I recycled my old 2500k and the board for use in a living room HTPC build that can handle 4K video files and do some gaming, all while running Windows Media Center with 5 ATSC tuners.