Rosewill Throne Case Review
by Dustin Sklavos on August 2, 2013 12:00 PM EST- Posted in
- Cases/Cooling/PSUs
- Rosewill
- ATX
- XL-ATX
For testing full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| ATX Test Configuration | |
| CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
| Motherboard | Gigabyte GA-Z77X-UD4H |
| Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) 2x NVIDIA GeForce GTX 580 in SLI (full fat testing only) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive 3x HGST DeskStar 3TB 7200-RPM HDD |
| CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 1000W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
For the "full fat" testbed, the GTX 560 Ti is swapped out for a pair of GTX 580s, and three hard disks are added to fill out the case.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z77X-UD4H motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- Thank you to HGST for providing us with the trio of hard drives.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
31 Comments
View All Comments
MiLuong - Friday, August 2, 2013 - link
Ohh! I saw this case's debut at PAX, and it's actually really a cool case. It's very large, and offers plenty of room for a sweet liquid cooled system. They had it modded, and it looked slick. Even without liquid cooling, there is plenty of air circulation space in the Throne case - room for multiple graphics cards, plenty of power, good cable management, etc. Un-modded, I still think the design is sleek, but I guess that is all a matter of preference - some say it's ugly, some like it... opinion. Anyhow, great gaming case.As the article mentions, dust will be an issue with just about ANY case, and so it's up to the user to keep that clean. I've found it's a pretty simple case to blow out on occasion, and keep the dust down, but, like I said ~ ANY case is going to get dust.
Good Article. Thanks.
Spydermag68 - Friday, August 2, 2013 - link
I just cannot get past the look of the front of the case. It just screams don't buy me.Bonesdad - Friday, August 2, 2013 - link
Looks kinda Cylon to me..."Don't Buy Me!!!"...by your command.Subyman - Friday, August 2, 2013 - link
I don't understand the market position. For people that need this large of a case for E-ATX, quad sli, with water-cooling, and so forth, they are already spending $3K+ on gear, so why save $50-100 on a case? It would be good for that anyway though, since it only supports one 280mm radiator. I see most people that purchase this case being the type that buy the biggest there is to put a standard ATX motherboard and one GPU in it, but bigger is better right?glugglug - Friday, August 2, 2013 - link
I'm thinking of getting a case like this for my next build because it is going to have a slew of drives for use as a whole-home DVR. I'm thinking 4x4TB drives to start with (8TB storage with mirroring), plus boot SSD + blu-ray + SD card reader = half those drive bays filled immediately, good to have room to expand.Grok42 - Friday, August 2, 2013 - link
Why would you want your main box to be your storage box? Build a dedicated server for file storage.ZPrime - Saturday, August 3, 2013 - link
You really don't need 8TB of storage for WHDVR unless you are basically recording everything on TV. I have a 3TB mirror (using a pair of WD Red) and Media Center tells me that using *most* of that 3TB (I think I have it leaving a few GB free), it's over 300 hours *of HD*.Unless you are just saving the crap forever... but at that point, you can move it off to a NAS, which you can keep in the basement/closet/other room, where heat and noise don't matter. For HTPC, the sweet spot is a smaller system that is as quiet as you can get it. I'm using a Silverstone Grandia GD06 -- similar to the GD05 that Anandtech reviewed, but it has hotswap SATA bays in the front which make replacement of a failed drive from your mirror MUCH easier (the Grandias are a pain in the ass to work in otherwise). This way if I lose a drive, I RMA it and insert the replacement without any downtime to the machine.
Grok42 - Sunday, August 4, 2013 - link
I personally have almost 1TB of just music and audio books. I have kids and you wouldn't believe how much just their movies take up and they watch them dozens of times per year. Most of the stuff I own are DVDs I ripped into ISO format. All in all I'm using about 4.5TB on my media server. That said, I'm with you that too many people save too much junk they will never watch again. Most of my non-kid stuff is old rips from media I wanted to throw in the attic and I don't watch it much if ever.NONE of this is in my living room. I can't imagine why I would want it there. I also don't want it generating heat in any of the boxes I use daily. I put all of that on my house server in the closet that also handles SVN, FTP, HTTP and other duties. I have gigabit networking to most rooms but my main TV can't have a wire run. I use a wireless N bridge that has never had issues other than a slight ~3 second buffering when playing a video. I recently upgraded to AC and it is unbelievably good.
Again, why would anyone that has a ton of video/audio want to store this on their main workstation? I built my server new for less than $400 + HDs. Most have a basic system they could use for basically free.
piroroadkill - Saturday, August 3, 2013 - link
World's most hideous DVR.If I needed that many drives in the machine next to my TV, Fractal Design Define Mini, maybe, but even that is too big. This thing? A godawful, open mesh, noisy beast. God no.
mwildtech - Friday, August 2, 2013 - link
Only in Texas.. and well... yeah..