Noise and Thermal Testing, Stock

When testing the Lian Li PC-A55 I came upon a real conundrum. It's easy to argue our traditional assembly is less than ideal for testing this case, and the usual testing conditions unfortunately involve testing it on a thinly carpeted floor. At the same time, these are the exact same conditions that every other case was tested under, so making these allowances for the PC-A55 would potentially skew the results.

There was also the distant possibility that a second set of tests would give the PC-A55 some breathing room, so to speak. I originally made a judgment call and decided against testing on a different surface, but we eventually decided it was best to show what would happen if the case isn't on carpet. The results certainly improve, though not as much as you might want, and ultimately more data is always good to have.

With summer now here in Northern CA, my AC is working overtime to keep temperatures in check. I tested the PC-A55 under our standard conditions with an ambient temperature of approximately 24C, and again using the side panel of an Antec P280 as a flat surface on the carpet; those results are the ones labeled "elevated."

CPU Temperatures, Stock

GPU Temperatures, Stock

SSD Temperatures, Stock

At stock, the thermal results of the PC-A55 aren't horrible, but they're still near the back of the pack—and on the carpet, the PC-A55 really lives up to its name. The SSD runs particularly hot, and that's due to the fact that there's no airflow around either of the 2.5" mounts. In an ideal situation, air is channeled up from the bottom 140mm fan, through the left side of the case, and out of the top 140mm fan. There's literally no ventilation anywhere near any of the drive bays and we're forced to rely on the aluminum building material to channel heat off of the drive.

Even that wouldn't be too bad, except that due to the way the drive mounts to the cage and the bottom of the enclosure, there's a small gap between it and the aluminum surface of the case. 43C is probably still okay for an SSD, but it's at the limit of where I'd be comfortable, and the rest of the storage bays are likely to be just as hot. Running a couple 3.5" HDDs sandwched together in this sort of enclosure is not something I would recommend.

Elevating the PC-A55 does improve temperatures substantially, but not really enough to make it competitive. The one to beat here is the Corsair Obsidian 550D, which performs comparably thermally but as you'll see in a moment it runs much quieter.

CPU Fan Speed, Stock

GPU Fan Speed, Stock

Even at stock clocks the CPU fan is already running nearly full tilt under load, while the graphics card fans are running at higher than usual settings. Putting the PC-A55 on a flat surface (or resting it on its side) and allowing cool air inside at least mitigates the video card's fan speed, but the CPU fan is still suffocating.

Noise Levels, Stock

Thankfully Lian Li's case runs fairly quiet despite essentially cooking itself. Having only two fans (one of which is muffled in the bottom) allows the PC-A55 to run below the noise floor of our sound meter at idle, while load noise is bad but not horrible. Keep in mind that part of this is because there's virtually nowhere for sound to escape either, though; the only ventilation the PC-A55 really has is through the top fan.

Testing Methodology Noise and Thermal Testing, Overclocked
Comments Locked

64 Comments

View All Comments

  • Bitmap - Tuesday, June 19, 2012 - link

    I laughed my A55 off
  • MadAd - Wednesday, June 20, 2012 - link

    "We're at a juncture now where there are very few reasons to go with an ATX motherboard over a Micro-ATX board"

    Exactly!! PC form factors need a reboot if they are to survive the next 10 years onslaught of tablets. ITX is a fantastic format limited only by its 17x17 size allowing only a single expansion slot and 2 channels of ram - and that really makes sense when paired with a low profile card in a thin case ... as soon as we need some HDDs, or a larger graphic card, or a soundcard and a graphics card then theres a big void between that and the 4 slot uATX format, filled only by the defunct DTX format (that imo with only 2 slots really didnt give much more of an option to ITX.)

    My ideal board would have 3 expansions, 2x16 and 1xPCI, 4 Ram Slots and 6 Satas in a size not much bigger than ITX however this is all moot since the biggest problem is elsewhere too, we still have a problem with things like PSUs, they need to be smaller, same with Optical RW drives, do we need more than a laptop slimline size for opticals?

    The first CD i burned in the last century was in a 5.25" bay, while we cant do anything about the width of the disk certainly it could slimline allowing sideways mounting yet there are no standard mountings for slimline Optical drives in the ATX spec.

    Apart from the wishful thinking I do believe its time to step down from these humongous tower cases. I am already planning my next build into a uATX but of course anandtech doesnt really cover uATX stuff now does it *grin*
  • rickcain2320 - Thursday, June 21, 2012 - link

    I have the previous version of this case and it has a severe hot spot at the top. The addition of the exhaust fan at the top hopefully resolves this problem. They rotated the power supply so it blows in rather than out (I guess) which is good, because the old fan direction was right over the hard drives, bathing them in warm air from your GPU and CPU. I regularly kept my front panel off because of overheating.

    Makes me wonder if I do some minor surgery and flip my fans over, could I achieve something similar?
  • manythings - Tuesday, October 20, 2015 - link

    I have read this several times and still didn't get the joke about the name of the unit. Is it about being "PC"? But every Lian Li case is a PC. Could the author explain the joke? Thanks

Log in

Don't have an account? Sign up now