ASUS P8Z77-V Deluxe Review - Know Your SKU

Test Setup

Power Consumption

Power consumption was tested on the system as a whole with a wall meter connected to the OCZ 1250W power supply, while in a dual 7970 GPU configuration.  This power supply is Gold rated, and as I am in the UK on a 230-240 V supply, leads to ~75% efficiency > 50W, and 90%+ efficiency at 250W, which is suitable for both idle and multi-GPU loading.  This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency.  These are the real world values that consumers may expect from a typical system (minus the monitor) using this motherboard.

At lower loads, the power consumption on the Deluxe does seem a little high.  This is due to ASUS' phase loading, in order to reduce the variation in voltages when lots of power is required instantly.  This shows in the 2D benchmarks shown later in this review, which offer superior numbers.

POST Time

Different motherboards have different POST sequences before an operating system is initialized.  A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized).  As part of our testing, we are now going to look at the POST Boot Time - this is the time from pressing the ON button on the computer to when Windows starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)  These results are subject to human error, so please allow +/- 1 second in these results.

As requested, for future POST tests we will include an additional 'stripped' test, whereby controllers are turned off (USB 3.0, NIC, Audio, SATA Controller).  The Deluxe is like the Pro, in that the onboard testing to make sure everything works takes an extra few seconds over other products.

Overclocks

Here at AnandTech we want to provide quick and easy ways to determine if a board is good for you (with in-depth analysis of course).  So here is a quick round up of our overclocking results.  Overclocks are tested for stability with PovRay and OCCT - while these may not be the most strenuous of stability tests, it does offer a quick check for memory errors under high load (and also balances testing time with getting the next board on for review!).