Corsair Obsidian 550D: Starting to Specialize
by Dustin Sklavos on March 29, 2012 3:01 PM EST- Posted in
- Cases/Cooling/PSUs
- Corsair
- mid-tower
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
59 Comments
View All Comments
Nje - Friday, March 30, 2012 - link
The side panel can also fit a 200mm fan, would be interesting to see if it is possible to fit a 200mm fan and a NH-D14..stratosrally - Friday, March 30, 2012 - link
I have SLI'd GTX580s and a Corsair H60 with push/pull 120mm fans in my Scout. It is a noise machine - and that is with a custom solid side window - no vents or fans on it. I added a second 140mm intake in the 5.25"bay area under my single ODD so there are 2 front 140mm intakes, 1 top 140mm exhaust, and the 2x120mm push/pull rear =exhaust.I'd really like to try this case, the only change from as AT tested would be add an additional 120mm bottom fan next to the PSU, and keep my push/pull on the rear exhaust. I'd want to leave the solid side and top panels installed to keep noise at a minimum.
I wonder if I'd see a temp rise? My Scout is just crammed full, it has 1 SSD and 2 HDD and an audio card.
jimmyzaas - Saturday, March 31, 2012 - link
I like everything about this case except for the Front IO/power button position. If you have something plugged in to the USB port, like a usb cable for your cellphone or a usb thumb drive, you won't be able to open the door to access your optical drive or other 5.25" devices without first unplugging your device. This is just stupid IMHO.Many cases out there got this simple thing right by placing IO and buttons on TOP of the case. Why do you have to be special and put it in some ugly color-mismatched rectangular cutout in front of the case that feeds through a hole in the front door?
Sure you can remove the front door completely but why would you want to go that route? If I wanted something that looks like a Silverstone RV03, I would have bought that. I'm getting this case for the minimalistic look with the door in tact.
Death666Angel - Sunday, April 1, 2012 - link
It is, as you correctly denote in the graphs, "Degrees Celsius". Which is not "C" but rather "°C". But since you are dealing with deltas here, it would be much simpler to just use "Kelvin", "K", as most people do. :-)Thanks for making the switch to deltas though! :D
1ceTr0n - Sunday, April 1, 2012 - link
But you honestly do the worst case reviews with the worst reviewer possiblyhelvetio - Monday, April 2, 2012 - link
I just built a new system with this case and I really like it. The door can open to both sides, but the clips that allow this to happen are a bit delicate and I already broke one. Fortunately two spares are included.Since I keep the PC on the desk, it is important to me that the front ports and buttons are on the front, not on the top.
The PC is very quiet, even to my hypersensitive ears, the loudest part of the build as an evga GTX 460 but the sound proofing further lowers its noise.
Mosab - Tuesday, April 3, 2012 - link
1- From what I have seen the GC is Zotac not ASUS GeForce GTX 560 Ti DCII TOP.2- (GPU thermals are at the 90C) that is toooooo much for the GTX 560 Ti. I have GTX560Ti and I think that 90C is extreme even for over clocked one
cyberguyz - Tuesday, April 3, 2012 - link
They sink in the motherboard pan appproximately 1/4". If you are using a mATX board like the one in this article, you are fine, but if you have a full size board like an ASUS Maximus IV Extreme Z that has that lovely bank of 'lay down' SATA ports right at the edge of the motherboard, get set to break out a hammer and do some remodelling of that case.You see that raised area surrounding the motherboard pan area? It is just high enough that it blocks access the bottom-most sata ports on these motherboards. You just can't get a SATA connector into them. In short, unless you want to ding up your case to fit that really expensive full size motherboard with SATA connectors facing to the edge, I would suggest steering away from any of the Corsair Obsidian, Carbide and possibly the Graphite series cases.
As you can guess, this is from bitter experience after buying a Carbide 500R, getting it home and being faced with this conundrum.
jmunjr - Friday, April 16, 2021 - link
"but I also feel like there are large parts of it just waiting to develop issues with vibration in the future."8 years after building my system in this case it is as quiet and noise free as it was on day 1. Never an issue and never a vibration. This is the best case I have ever owned by far.