ASUS E35M1-M Pro Review - Anyone For Fusion?
by Brendan van Varik on October 25, 2011 5:00 AM EST- Posted in
- Asus
- Motherboards
- Fusion
- E-350
3D Movement Algorithm Test
The algorithms in 3DPM employ both uniform random number generation or normal distribution random number generation, and vary in various amounts of trigonometric operations, conditional statements, generation and rejection, fused operations, etc. The benchmark runs through six algorithms for a specified number of particles and steps, and calculates the speed of each algorithm, then sums them all for a final score. This is an example of a real world situation that a computational scientist may find themselves in, rather than a pure synthetic benchmark. The benchmark is also parallel between particles simulated, and we test the single thread performance as well as the multi-threaded performance.
During the single threaded testing, this motherboard was the fastest but it did not fare too well in the multithreaded environment after repeated tests. However both tests are well within statistical variance.
WinRAR x64 3.93
With 64-bit WinRAR, we compress the set of files used in the USB speed tests. WinRAR x64 3.93 attempts to use multithreading when possible.
The ASUS E35M1-M PRO is currently the fastest Fusion motherboard in our WinRAR test.
FastStone Image Viewer 4.2
FastStone Image Viewer is a free piece of software I have been using for quite a few years now. It allows quick viewing of flat images, as well as resizing, changing color depth, adding simple text or simple filters. It also has a bulk image conversion tool, which we use here. The software currently operates only in single-thread mode, which should change in later versions of the software. For this test, we convert a series of 170 files, of various resolutions, dimensions and types (of a total size of 163MB), all to the .gif format of 640x480 dimensions.
The result of 219 seconds is the second fastest we have for A50M.
Facebook
Twitter
RSS
66 Comments
View All Comments
C300fans - Tuesday, October 25, 2011 - link
1, If DXVA 2.0 works FLAWLESSLY , it works.2, It is good.
spaceyyeti - Tuesday, October 25, 2011 - link
1. Yes, it can. Even 1080p flash (on windows) is kidsplay for fusion.2. Way better then Intel's. I run linux and I get some glitches, but those are really really rare. Under windows there are no problems at all.
C300fans - Tuesday, October 25, 2011 - link
2, If you use cpu to decode high rate files, it will have obivous glitches.spaceyyeti - Tuesday, October 25, 2011 - link
it's not a cpu problem. the ati linux drivers are not that great lately, so uvd3 support is still a bit problematic. but as I said; the glitches are rare. some movies get none, others get 1 or 2 in an hour. they are not annoying or even that noticeable. and yes, I checked my codecs :-) the main problem with the ati drivers nowadays is bad support for gnome-shell/gnome 3. artifacts al over the place. haha. but that's not really relevant to this article.plonk420 - Wednesday, October 26, 2011 - link
it's not high bitrates that have issues, it's retarded settings that go out of Level 4.1 specs, like 16 reference frames @ 1080p.i just wish this was ~20-30% faster and 1/4th the GPU speed. it's just ever so slightly too slow for Spline scaling in ffdshow, IIRC.
Meegulthwarp - Tuesday, October 25, 2011 - link
Nice to see a power supply that reflects what most people would be using with this setup. It would be interesting to have a comparison between this 250w and a 1000w to see if all the haters were correct.Once again, nice review. Currently looking for a HTPC for my new flat. Just worried AMD might release a refresh of Fusion when I buy one. Anyone know if there is a refresh on the horizon?
spaceyyeti - Tuesday, October 25, 2011 - link
The E-450 is coming. Higher CPU and GPU clockspeeds (cpu: 1,65ghz gpu: 508mhz with 600mhz turbo) and a better memory controller supporting 1333mhz. But you can do that with this board too, by just selecting it in the bios.Other than that, you'll probably have to wait for a process shrink.
http://www.anandtech.com/show/4407/the-brazos-upda...
Meegulthwarp - Tuesday, October 25, 2011 - link
Thanks, I thought I saw that but couldn't find it. Might just mull it over and give the E-350 a pass for the time being.lestr - Tuesday, October 25, 2011 - link
Ancient history folks. Asus has updated to the 450. Boards have been available in Asia and Europe for weeks now. Slight bump to 1.65 and RAM std upped to 1333, OC 1600. No idea how it would test out - hasn't been done yet. Can't understand why they only have 3 analog audio outs on the rear. BIOS tweaks? who knows.I sent an e-mail to Anand 2 weeks go asking him to get Gary to send one over... Oh well.. we'll see who gets it first. Nice try and a good re-introduction.
silverblue - Tuesday, October 25, 2011 - link
I'm very interested to see if the extra memory bandwidth does anything for the HD 6320 or if it runs out of steam, in which case AMD would've been right to only include a single channel memory interface.