ZFS - Building, Testing, and Benchmarking
by Matt Breitbach on October 5, 2010 4:33 PM EST- Posted in
- IT Computing
- Linux
- NAS
- Nexenta
- ZFS
Shortcomings of OpenSolaris
OpenSolaris, while a great platform for a storage system does lack some features that we consider necessary for a dedicated storage array. One thing that never worked quite right was the LED's on the front of the chassis. It was very difficult to know which drive was which after they were installed. The drive names shown in the operating system do not correspond with the physical drives in any consistent way. This would make troubleshooting a drive failure very difficult, as you'd not know which drive was which drive. Ideally, a red LED should come on beside the failed drive so it will be easy for a tech to quickly swap the correct drive.
Another shortcoming was the lack of a built-in Web GUI. The Promise system comes with a web interface to create, destroy, and manage logical volumes. OpenSolaris has no such interface. It's all done via command line controls. Granted once you've become familiar with those command line tools, it's not terrible to set up and destroy volumes, but it'd be nice to have a GUI that allowed you the same control while making it easier for first-timers to manage the system.
The last and possibly most important shortcoming of OpenSolaris is the lack of an automatic notification system if there is a failure. No email goes out to page a system administrator if a drive dies, so when the system has a drive failure you may never know that a drive has failed. This presents a very clear danger for usage in the datacenter environment, because most of us just expect to be notified if there is a problem. The Promise solution does this very well and all you have to do is put in an SMTP server address and an email address to send the notification messages to.
All of these can be solved with custom scripting within OpenSolaris. An even easier solution is to simply use Nexenta. They already have the LED's and notifications figured out. It's a very simple to get Nexenta configured to notify you of any failures.
Another solution is to buy third-party LED/FMA code. We have tried the SANtools package and it seems to work pretty well for enabling LED's, but there is still some work to be done before it is as easy as Nexenta. If you use the code from SANtools to control the LED’s, you will still need to write some scripts to polls FMA and send notifications and launch the SANtools script to control the LED’s. You can find the SANtools software here:
While this is very possible to script all of this with FMA, I'm not interested in re-inventing the wheel. Until someone comes up with this code and contributes it into the OpenSolaris project, it is simply not practical for most people to use OpenSolaris directly. OpenSolaris should have code built into the core for notifying the system administrator and for shining the LED on the correct drive.
Facebook
Twitter
RSS
102 Comments
View All Comments
mbreitba - Tuesday, October 5, 2010 - link
Thanks for the comment on the ZIL.As far as using the X25-E's as ZIL devices - when we built the box initially, the X25-E's were the best choice at the time. Future builds will probably include a capacitor-backed SSD.
James5mith - Tuesday, October 5, 2010 - link
For what it's worth, we are currently using roughly 16 of the Supermicro 846-E1 chassis in our storage solutions.Drive numbering is from bottom to top, left to right. Don't know if this helps or not.
5 11 17 23
4 10 16 22
3 9 15 21
2 8 14 20
1 7 13 19
0 6 12 18
badhack - Tuesday, October 5, 2010 - link
I would be curious to know how the performance compares to traditional fs caching on Linux w/ ext3 or ext4 with same amount of memory and a few SSD drives.Maveric007 - Tuesday, October 5, 2010 - link
There are a few options within Linux that would be pretty interesting to see. FS caching and the different schedulers that are available within Linux. Also I would throw out ext3 and replace that with ext4 and xfs. Redhat is now supporting xfs and there are just tons of tunables for xfs compared to the other file systems.badnews - Tuesday, October 5, 2010 - link
Thanks Matt, I've been following the build over at your blog and this is an excellent article to tie it all together. I hope you follow up with your "things we'd do differently" in future articles. I would also love to see some more benchmarking against more alternatives, e.g. Open-E, or even an off-the-shelf EqualLogic.Keep up the good work :)
Fallen Kell - Tuesday, October 5, 2010 - link
Well, I know at least for Solaris 10.... I would suspect that OpenSolaris has it as well by now, since it has been out for at least 4 years that I know of...https://<host>:6789
mbreitba - Tuesday, October 5, 2010 - link
You can install the ZFS Web GUI from the Solaris toolkit, but it isn't bundled into OpenSolaris. It is binary compatible, but it doesn't give any good options for iSCSI setup, as it only supported the old iSCSI target rather than the new COMSTAR target.sfc - Tuesday, October 5, 2010 - link
How can you spend a page talking about how you aren't really worried about the future of Opensolaris, and then have half a paragraph mentioning "oh, btw, it's cancelled"? The project is clearly dead. They stopped releasing source almost a month ago. Oracle has made absolutely no guarantees about when or how source would be released in the future. For all we know, they could release only portions of Solaris Express, and do it months to years after the binaries drop.http://opensolaris.org/jive/thread.jspa?messageID=...
I love ZFS/Opensolaris, I use it at home, but Opensolaris is dead.
Mattbreitbach - Tuesday, October 5, 2010 - link
OpenSolaris is indeed dead as far as development goes, but it's still viable if you want to use the last build released which is what all of our performance figures are based on. I will be writing some companion articles to this one talking about not only the death of OpenSolaris, but it's alternative, OpenIndiana, and the Promise M610i used as a comparison in this article.andersenep - Tuesday, October 5, 2010 - link
The OpenSolaris project may be dead but ZFS and all the CDDL licensed code is still out there. Illumos, OpenIndiana and a few other distros are still out there and available. Oracle has stated they will continue to release source code after Solaris releases and will also provide binary preview releases in the form of Solaris Express. To say Solaris and ZFS are dead is pretty premature.Whatever happens, the existing code is out there. To call it dead is a bit premature. Sure the project that had the name 'OpenSolaris' has been canceled, but everything that made it up (minus a small few closed bits that have already been replaced) lives on.