Putting Together the Cube

Evaluating the AVADirect Nano Gaming Cube is different from handling the other desktops simply because its form factor warrants attention. The design is of an impractical mentality: we climbed the mountain because it was there. They built it because they could. It's a lot like the old Shuttle SFFs we used to review, only this isn't a proprietary case, motherboard, and PSU (thankfully!).

The SilverStone Sugo SG06 case is modded and literally stuffed to the gills. On the right-hand side of the machine (assuming it's facing you), ventilation holes were removed and a 120mm Scythe fan was added to improve cooling. That fan, along with the freakishly large Radeon HD 5870, makes it very difficult to take the case apart. There's just one large panel that bends over the top and sides, and it flexes mightily. It has to in order to fit around everything inside. Word to the wise: if you're going to buy the cube, you'd better buy it exactly how you want it, because everything is so tightly condensed inside (well-routed, but come on, the case is wee) that changing out anything will prove to be a real issue.

And then there's noise. The thing could be a lot louder, and I'm not sure exactly what could've been done to mitigate the problem, but as a whole it's fairly loud under load. Most of that blame can be shouldered by the cooling system on the Radeon HD 5870. Sapphire's Vapor-X system is ideal for a card placed in this kind of build, but it's still noisy, and the much needed ventilation on the side of the case does nothing to mask it. Suffice it to say, if you're sensitive to noise, the cube probably isn't for you.

Where I get really frustrated is the overclock. I've griped about it on the other boutique builds I reviewed and it only gets worse here. The problem is twofold. First, the nominal 3GHz overclock is of questionable value if the system is going to be used chiefly for gaming. The i5-750S at stock speeds will punch it up to 3.2GHz on two cores depending on system load and that's going to be better for certain games since the system seems to be fairly CPU-limited. With a turbo-free 3GHz performance is potentially left on the table for games like StarCraft II. It isn't a dealbreaker and it's not keeping games from being playable, but it's still a small issue.

The other problem is that the overclock is another lazy one. Chip features are disabled, and the voltage and clocks don't drop when the system idles. In a larger desktop this isn't as big of a deal, where the boutique machines can just laugh it off with a watercooling system while you try to figure out why your power bill is spiking. But in a Mini-ITX case where everyone's squished against each other and cold air is at a premium, any savings on heat and voltage is going to make a big impact on noise levels and system wear. Bottom line: if you're willing to cut out the side of the case and put a fan in, you should be willing to properly tune the processor to make the best of that effort.

Someone's probably already thinking that it's completely insane to even try and fit a card like the Radeon HD 5870 into a case like this. I think that person has missed the point entirely. First, the point is the fact that someone was crazy enough to even try to do it to begin with, so the fact that it was successful is really the achievement here. Second, as far as high-performance GPUs go, the 5870 is the most power you're going to get into a single card before you get to cards that most likely will overheat in a case like this: the GeForce GTX 470 and 480, or there's the dual-GPU HD 5970. And for the record: no, AVADirect does not support/offer any of those GPUs as an upgrade for the Nano Cube, and understandably so. If they don't overheat, they'll be obscenely loud, making you long for the halcyon days of the 5870's Vapor-X cooler.

As for the rest of the configuration, the 128GB Corsair Nova SSD sure is fast, but it's also not ideal. SSDs work best as system drives, where a more affordable mechanical drive can provide the kind of capacity needed to hold games that are only getting bigger and bigger as time goes on. The case is able to handle a 2.5" drive and a 3.5" drive, though: going for an SSD system drive and a substantial (hopefully cool-running) mechanical drive would probably be the way to go.

Playing Some Small Games Conclusion: Good Things in a Small Package?
Comments Locked

42 Comments

View All Comments

  • sprockkets - Friday, September 17, 2010 - link

    That stinks. All I can add is my SG40 works, but sometimes it won't boot up after the BIOS for whatever reason. Not bad for 5 years of heavy use.

    My current SG31G2 works pretty good. I can only say it looks well built.
  • archcommus - Friday, September 17, 2010 - link

    Excellent timing on this article, as I've been interested in replacing my big ATX system with a Mini-ITX. I game very little and not above 1680x1050 res, never use my DVD drive, and don't need much HDD space, so I feel my current system and its size that hasn't changed since the 90's is simply overkill. I wanted even smaller than this AVADirect system, though, and was considering the Silverstone Sugo SG05 with the PSU it comes with, a Gigabyte board, and whatever video card I could fit. However I think it would be better to hold off until I can put a Sandy Bridge CPU in it. Any thoughts from the Mini-ITX builders here?
  • fr500 - Friday, September 17, 2010 - link

    The Gigabyte board is great, I have both the DFI MI P55-T36 and a Gigabyte on an even smaller system. The Gigabyte has better OCP which is important if you are overclocking.

    The SG05 with the stock PSU should be enough for a dual core i5 (or an i3 of course) and a GTX460 if you're not overclocking, another good option is a 5770 since it consumes even less power. I ran a GTS250 and an i5 750 overclocked witht the stock PSU and never went over 250w while gaming.

    I'd recommend a Prolimatech Samuel 17 to cool your CPU and if you can manage to get some 1.35v DIMMs it would be better. Other than that it's pretty straightforward and the results are pretty impressive.

    If you need more info PM me (if such thing exists here) good luck!

    PS: a couple of pics of my build back then when it was a Core 2 Duo
    http://dl.dropbox.com/u/149537/Photos/DSC02649%20%...
    http://dl.dropbox.com/u/149537/Photos/DSC02645%20%...

    It was a hit and had to build 4 more for friends a month later:
    http://dl.dropbox.com/u/149537/Photos/DSC02924.JPG
  • archcommus - Sunday, September 19, 2010 - link

    Thanks for the tips!
  • vol7ron - Friday, September 17, 2010 - link

    questions like these are why there's a forum
  • theagentsmith - Friday, September 17, 2010 - link

    Silverstone Sugo SG05, Gigabyte H55N-USB3, i5-750, 2x2GB Corsair DDR3-1600, 60GB Corsair Force, 1TB Caviar Green, VTX 3D Radeon 5770, stock FSP 300W PSU 80plus

    I think the case is done well especially if you consider it doesn't cost an arm and a leg. Of course you need a little more time routing the cables while building, but hey, it's astoningshly small!
    The system isn't that noisy, except the CPU fan quickly change RPM when there is a sudden load and you hear it easily since most of the case is opened by grilles.

    I still have to optimize it yet. What do you suggest to do? I think about a small overclock while keeping CPU features on and maybe a little undervolt.
    I have no practice in overclock these LGA1156 systems though.
  • Folterknecht - Friday, September 17, 2010 - link

    I would suggest the following: Set all voltages concerning the CPU from "AUTO" to "NORMAL" and just try it out! You should reach a BCLK between 150 - 160MHz without raising voltages. The "AUTO"-Setting with GB-Boards is just crap when overclocking cause the board sometimes raises voltages like there is no tomorrow.
    You may have to adjust RAM-Speed ...

    RAM testing with Memtest86+ might also be a good idea. Overall system stability ... Prime95 (blend), coredamage
  • SimKill - Friday, September 17, 2010 - link

    Hey Dustin, this article surely needs some pictures of the cube. Get some shots with comparison to regular household objects (like phones, xboxes etc) but we need some pictures!
  • jaydee - Friday, September 17, 2010 - link

    A phone? It's not that small. Maybe next to a bowling ball?

    BTW, if small footprint is what you're going after, the announced, but not yet available, Lian Li PC-Q11 looks outstanding. Would love to see a review of it!
  • SimKill - Saturday, September 18, 2010 - link

    See, exactly why a comparison picture would be useful. A phone was just an example. A bowling ball seems perfect, or even other ATXes as suggested below but we need size comparison pictures. Giving the dimensions is fine, but a picture is well worth over a thousand words (and takes thrice as much space!)

Log in

Don't have an account? Sign up now