Dawn of War II

Dawn of War II is our other RTS benchmark. It’s among the more challenging games in our collection, leading to there being a definite cutoff for playability.

Dawn of War II continues to spite AMD multi-GPU configurations, with the 5850 Crossfire losing to the 5850 by a fraction of a frame. Meanwhile the 5850 Crossfire isn’t even close to the GTX 285 SLI, which still scales poorly but at least scales upwards in performance. In single card performance on the other hand, the 5850 does well, closing in on even the GTX 295 thanks to poor SLI scaling.

HAWX Resident Evil 5
Comments Locked

95 Comments

View All Comments

  • Ryan Smith - Wednesday, September 30, 2009 - link

    An excellent question! This isn't something we had a chance to put in the article, but I'm working on something else for later this week to take a look at exactly that. The 5850 gives us more of an ability to test that, since Overdrive isn't capped as low on a percentage basis.
  • Zool - Wednesday, September 30, 2009 - link

    You could make some raw shader tests that doesnt depend on memory bandwith to see if the gpu internal bandwith is somehow limited or the external bandwith. And maybe try out some older games(quake3 or 3dmark2001).
    In DX11 games will use more shader power for other things which hawe litle impact on bandwith. Maybe they tested those heawy dx11 scenarios and ended with much less costly 256bit interface as a compromis.
  • Dante80 - Wednesday, September 30, 2009 - link

    Up to 80watts lower consumption in load
    120$ less
    Quieter
    Cooler
    Shorter
    Performance hit around 10-15% against 5870 (that means far better perf/watt and perf/$)
    ~12% More performance than GT285
    Overclocks to 5870 perf easily

    Ok, this is an absolute killer for the lower performance market segment. Its 4870vs4850 all over again. Only this time, they get the performance crown for single cards too.

    Another thing to remember, is that nvidia does not currently have a countermeasure for this card. The GT380 will be priced for the enthusiast segment, and we can only hope for the architecture to be flexible enough to provide a 360 for the upper performance segment without killing profits due to diesize constraints. Things will get even more messy as soon as Juniper lands, the greens have to act now (thats our interest as consumers too)! And I don't think that GT200 respins will cut it.
  • the zorro - Wednesday, September 30, 2009 - link

    maybe if intel heavily overclocks a gma 4500 can can compete with amd?
  • haplo602 - Wednesday, September 30, 2009 - link

    hmm ... my next system shoudl feature a GTS 250. Unless ATI releases a 5670 and finaly hits opengl 3.2 and opencl support in their linux drivers.

    anyway the 5850 will kill lot of Nvidia cards.
  • san1s - Wednesday, September 30, 2009 - link

    interesting results, can't wait to see how gt300 will compare
  • palladium - Thursday, October 1, 2009 - link

    "interesting results, can't wait to see how gt300 will compare "

    SiliconDoc: WTF?! 5870< GTX295, top end GT300>>295 because it has 384bit GDDR5 ( 5870 only 256 bit), so naturally GT300 will KICK RV8xx's A**!!!!

    That's my prediction anyway (hopefully he decides not to troll here)
  • Dobs - Wednesday, September 30, 2009 - link

    My guess is - GT300 wont compare to 5850 or 5870.
    It will compare with the 5870X2 and be in the price bracket. (Too much for most of us.)

    When the GT300 eventually gets released that is.... Then a few months later again nvidia will bring out the scaled down versions in the same price brackets as the 5850/5870 that will probably compete pretty well.

    Only question is - can you wait?
    You could wait for the 6870 as well:P

  • Vinas - Wednesday, September 30, 2009 - link

    No, I don't have to wait because I have a 5870 :-)
  • The0ne - Wednesday, September 30, 2009 - link

    I really think enthusiast that spends hundreds on the MB alone isn't the regular enthusiast. So price wouldn't be an issue. I love building PCs and testing them but I'm not going to spend $200+ of a MB knowing that I will be building another system in few months with better performance parts and pricing. Unless I'm really keeping the system for a long time then I'll pour my hard earn money into the high end parts. But then if you're doing this I don't think you're really an enthusiast as it's really a one shot deal?

Log in

Don't have an account? Sign up now