The Generic SSD

Intel isn't the first manufacturer to get into the SSD market, in fact quite a few of the companies we regularly deal with have SSDs. OCZ Technology, SuperTalent, Patriot, G.Skill, Mtron, and Silicon Power are just the names that contributed hardware for this review, but many more actually make SSDs.

Silicon Power drives provided by DV Nation

You'll notice that most of these companies are memory companies, not chip companies. Cracking open any of their SSDs reveals the true nature of their SSD manufacturing business: most of them simply rebrand someone else's SSD.

Let's take the MLC drives for example, here we have MLC drives from OCZ (the infamous Core), SuperTalent and Silicon Power:

Every last one of the drives has the exact same layout, same flash devices and same Jmicron controller (the JMF602).

The same is true for SLC designs, here we have SLC SSDs from G.Skill and OCZ:


They are the same, you could give them ice crea...nevermind

Note that these are the same drive, in this case purchased from Samsung and placed in new housing.

Only Mtron offers a slight amount of innovation by using its own FPGA as a controller:

But we know very little about any of these controllers so it's tough to say if Mtron's FPGA is done well.

For the most part however, all existing MLC drives on the market are built out of the same parts, as are all existing SLC drives. The MLC drives all use the JMF602 and the SLC drives use the Samsung S3C49RBX01 host controller with 32MB of on-board DRAM. The SLC drives are all priced above $640 for 64GB while the MLC drives are all under $300 for 64GB, Intel's 80GB MLC is priced in between the two (but closer to the SLC drives) at $595.

We'll soon see that Intel's price is justified in the market, but before doing that it's important to address an issue with these very tempting MLC drives...

What Happens When Your SSD Fails? Enter the Poorly Designed MLC
POST A COMMENT

96 Comments

View All Comments

  • Donkey2008 - Monday, September 8, 2008 - link


    Starting sentences with a conjunction is acceptable, but it is considered bad prose. You are giving everyone a headache. Go take your ritalin.
    Reply
  • ggordonliddy - Monday, September 8, 2008 - link

    As you stated, my English usage was correct.

    And I'm not the one writing the article; the burden is much greater on the people who are being PAID to write, as it should be. They are setting the example for others.
    Reply
  • mindless1 - Thursday, September 11, 2008 - link

    As a paying customer I urge you to ask for a refund. Reply
  • Jingato - Monday, September 8, 2008 - link

    What kind of loser gives a f*** about improper use of commas? This aint a novel, it's a friggin tech site.

    lol get a life.
    Reply
  • ggordonliddy - Monday, September 8, 2008 - link

    You are just making it clear that you do not have a firm grasp of English. You are afraid of those who criticize poor grammar, because you know that you yourself will be exposed for the fraudulent pustule that lies beneath your slimy veneer.

    I have a life. I'm just sick of illiterate authors. Just because it is a tech site is no excuse for extremely poor writing skills. I'm talking about skills that should be completely mastered before being allowed to graduate from elementary school.
    Reply
  • Jingato - Tuesday, September 9, 2008 - link

    No, I just don't give a f***.....there's a difference.

    I think you're being way too over critical. Maybe it's you OCD kicking in. If those incorrect commas really bothered you THAT much, then you should seek professional help. Seriously, that's not normal.
    Reply
  • aeternitas - Thursday, September 11, 2008 - link

    If you dont give a ****, then shut the hell up. Reply
  • Gannon - Tuesday, September 9, 2008 - link

    Anand's editors should get this:

    http://www.whitesmoke.com/landing_flash/free_hotfo...">http://www.whitesmoke.com/landing_flash...otforwor...

    I've used it, it is not currently on this machine but what you do is you press "F2" and it checks your grammar and makes suggestings and points out errors, etc.
    Reply
  • DerekWilson - Tuesday, September 9, 2008 - link

    From your comment:

    "You are afraid of those who criticize poor grammar, because you know that you yourself will be exposed for the fraudulent pustule that lies beneath your slimy veneer."

    "... that you yourself will be exposed ..." should, in fact, be properly punctuated with commas like so: "... that you, yourself, will be exposed ..."

    I agree that grammar is important. But you have to admit that screwing up on comma usage while pointing out someone screwing up on comma usage is funny.

    ...

    Also, while it isn't an excuse, the last two days of work on this article were sleepless ... Anand wanted to get it up much sooner, and sometimes we have to make the decision to get the article out quickly rather than to send it through our managing editor.

    We do always appreciate people pointing out spelling and grammar errors in our articles. We never want to over shadow the content with other issues.
    Reply
  • ggordonliddy - Tuesday, September 9, 2008 - link

    > "... that you yourself will be exposed ..." should,
    > in fact, be properly punctuated with commas like so:
    > "... that you, yourself, will be exposed ..."
    >
    > I agree that grammar is important. But you have to admit
    > that screwing up on comma usage while pointing out someone
    > screwing up on comma usage is funny.


    Wrong. A comma is not required between "you yourself." See http://www.selfknowledge.com/109331.htm">http://www.selfknowledge.com/109331.htm and other examples.

    I am a bit sorry for being so abrasive in my original post though. Run-on sentences just drive me nuts.
    Reply

Log in

Don't have an account? Sign up now