Feature Set: Hitachi 7K1000


The external design of the Hitachi 7K1000 is the same as the majority of the TK or K series drives. The drive is based on the industry standard 3.5" form factor platform and would normally have the pertinent part number and warranty information embossed on a white sticker on the top of the casing. However, our O.E.M. sample was graciously provided by Dell and does not include this information. The only other differences between the O.E.M. and retail units will be the inclusion of an accessory kit, HD Feature Tool software (that can be downloaded separately), and the obligatory retail packaging.


The Deskstar 7K1000 ships with the Serial ATA data and power connector along with a space for a 4-pin Molex power connector designed for use with older ATX power supplies. Our early press photos included the 4-pin Molex connector but it appears the inclusion of it will be at the discretion of the O.E.M. or distribution locality. The 32MB of cache memory and controller logic is located on the outer side of the PCB.



Hitachi offers their excellent DOS based HD Feature Tool that allows the user to view the specifics of the drive and change certain options such as S.M.A.R.T., AAM, Power Management, and read and write optimizations. Our drive arrived with Automatic Acoustic Management turned on and set to the quietest level. We were able to easily set different levels or turn off AAM altogether. We found in our limited acoustical testing there was not a real difference between the 128 and 256 setting. Performance was slightly affected with AAM implemented but we felt the benefits of having it turned on outweighed any performance impact.

Hard Disk Test Comparison and Features

Hard Drive Specifications
Hitachi Deskstar 7K1000 1000GB HDS721010KLA330 Seagate Barracuda 7200.10 750GB ST3750640AS Western Digital Raptor 150GB WD1500ADFD
Manufacturer's Stated Capacity: 1000.2GB (1 Terabyte) 750GB 150GB
Operating System Stated Capacity: 931.5 GB 698.6 GB 139.73 GB
Interface: SATA 3Gb/s SATA 3Gb/s SATA 1.5Gb/s
Rotational Speed: 7,200 RPM 7,200 RPM 10,000 RPM
Cache Size: 32 MB 16 MB 16 MB
Average Latency: 4.17 ms (nominal) 4.16 ms (nominal) 2.99 ms (nominal)
Read Seek Time: 8.5 ms / 14ms Silent 11 ms 4.6 ms
Number of Heads: 10 8 4
Number of Platters: 5 4 2
Power Draw Idle / Load: 8.1W / 12.8W 9.3W / 12.6W 9.19W / 10.02W
Power Draw Silent I / L: 4.3W / 9.9W - -
Command Queuing: Native Command Queuing Native Command Queuing Native Command Queuing
Warranty: 3 Year - Retail or OEM 5 Year - Retail or OEM 5 Year - Retail or OEM

The Hitachi Deskstar 7K1000 is the first 1TB drive to ship based upon manufacturer's specifications with a 750 GB offering scheduled for availability next quarter. Of course the actual capacity of the drive is 931.5 GB, but due to the way manufacturers report capacity the drive is considered to be a 1TB offering. This drive is also Hitachi's first 3.5-inch hard drive to use PMR technology. Additional 1TB versions for the Enterprise and DVR/Set-Top markets will be released later this year.

The 7K1000 features a 5-platter 10-head perpendicular magnetic recording design with rotational speeds at 7200rpm. The cache size has been increased to 32MB from the previous 16MB on the TK series. Hitachi includes their ramp load/unload, advanced low-power idle modes, and thermal-fly height control technologies. This drive series also supports Native Command Queuing and hot-swap capabilities. The Hitachi Deskstar 7K1000 drives ship with a three year warranty and additional specifications can be found here.

The Hitachi 7K1000 drive we are reviewing today will be compared directly against the Seagate ST3750640AS 750GB and WD WD1500AHFD 150GB drives in our limited benchmark test suite. We have also included the results of drives from our previous articles and will provide additional results of the 7K1000 in our upcoming 500GB roundup.

Index Test Setup
POST A COMMENT

74 Comments

View All Comments

  • Souka - Tuesday, March 20, 2007 - link

    Hmmm..... I'd like to see this drive against the raptors in a RAID 1, 0, and 5 setup....


    Reply
  • Gary Key - Tuesday, March 20, 2007 - link

    quote:

    Hmmm..... I'd like to see this drive against the raptors in a RAID 1, 0, and 5 setup....


    As soon as we have another drive. ;)
    Reply
  • Souka - Wednesday, March 21, 2007 - link

    Right on!

    Reply
  • Zoomer - Wednesday, March 21, 2007 - link

    Make that 2 for raid 5! Reply

Log in

Don't have an account? Sign up now