General Performance

There is little in the performance of the Asus A8R32-MVP in Winstone benchmarks that stands out. The Asus board is competitive with the best Socket 939 Athlon 64 boards that we have tested. We have already established in past motherboard reviews that the ATI chipset competes well with other AMD chipsets.

With the Memory Controller on the Athlon 64 processor, Winstone benchmarks are no longer very revealing of motherboard performance. In fact, we see boards that are tweaked for best gaming performance are often near the bottom of a tight range of benchmark performance numbers. The Winstone tests themselves are rapidly becoming dated, and are no longer supported by ZD Labs or Veritest. While Winstones are still useful in providing real world performance data, we will be dropping them from our motherboard test suite soon.

General Usage Performance

Content Creation Performance

General Performance

PCMark 2005 results with the A8R32-MVP Deluxe were outstanding, on the other hand. Performance of the Asus RD580 topped the PCMark05 results, and the dual x16 boards, ATI and NVIDIA, held the top two spots in the 05 results.

We were never completely comfortable with PCMark04, but PCMark05 is proving to be a much more useful overall performance benchmark. It is generally more sensitive than the older Winstones and PCM04 to recent improvements in PC architecture. PCMark05 results, in general, relate well to the other performance results that we find in our board tests - providing a quick and reliable snapshot of board performance compared to other motherboards.

Test Setup Graphics Performance and Encoding
Comments Locked

65 Comments

View All Comments

  • superkdogg - Wednesday, March 1, 2006 - link

    If you had been working for half the time you have been whining on every forum you can find, you could have bought two SLI-Experts or whatever motherboard you think has no problems.

    Dude, get over it. The A8R was not exactly as reviewed here. Is that disappointing? Yep. Unfair? Maybe. Fact is, anybody who bought it for the "serious overclocking" that you're referencing would do a vMod and get on with it. I have two A8R's. One is dead because I was stupid and tried a vMod. My soldering needs work. I bought a second one on refurb for $75 because I realized that in the best case, that vMod might get me another 150 MHz. You know what else would get me 150 MHz? Dusting off a Pentium Pro in my basement. I could also get the 2% benefit that 1T timing would give me from chance, since most 'marks are + or - 2-3%.

    I was burned by the same problem you were. I have learned to live with it and am currently happily running 300x9 with ram @ 2.5-4-4-9, 2T (166/200). That's not bad for standard blue heatspreader Patriot that runs about $80 per gig.
  • DigitalFreak - Wednesday, March 1, 2006 - link

    Omid, is that you?
  • yacoub - Sunday, February 19, 2006 - link

    Should have run the 3DMark benches with the 7800GTX like all the other boards so at least we could see if the board itself (the object of review) offered any particular performance gain or loss. :[
  • yacoub - Sunday, February 19, 2006 - link

    oic now, thanks. :)

    green bars. tricksy hobbitses!
  • Missing Ghost - Sunday, February 19, 2006 - link

    I am unhappy with the pictures of the board included in this review. I can't see anything on them because they are too dark. I couldn't even tell if they were a firewire port on the back.
  • Wesley Fink - Wednesday, March 1, 2006 - link

    The pictures are not overly dark on several monitors we tried in reading the review. I'm sorry I don't have advice in that area.

    As stated in the review, both Firewire ports are on an accesory bracket included with the motherboard. The bracket will fit in an empty slot or can be routed to case firewire ports.
  • Googer - Sunday, February 19, 2006 - link

    What Phase Power is this motherboard using? 2,3,4,8,24?
  • Beenthere - Sunday, February 19, 2006 - link

    Any properly designed 3-phase or greater CPU vcore circuit that complies with AMD's VRM64/T specs will work just fine. If however a mfg. delivers a poor circuit design or uses inferior MOSFETS, caps, etc., then you experience Vcore instability which causes all kinds of operational Hell. More phases just lowers the ripple and spreads the load across more MOSFETS.
  • Beenthere - Sunday, February 19, 2006 - link

    BTW, if you check the A8R-MVP, the A8N series and the Asus P5GL-MX you'll see that all of these mobos have been confirmed to have vcore instability problems when tested at the mobo with a DVM or scope. Asus seems to have some significant mobo engineering issues they can't resolve... and that are not present on other brands of mobos using the same chipsets.
  • Ecmaster76 - Sunday, February 19, 2006 - link

    Do you work for DFI or Abit or something? This is the third site where I have ran into you flaming Asus constantly!


    (where did I put that troll repellant)

    Seriously, link some proof of said Vcore instability. Show me scope printouts of the Vcore lines (and the 12v rails that were used to drive it)

Log in

Don't have an account? Sign up now