System Performance: Miscellaneous Workloads

Standardized benchmarks such as UL's PCMark 10 take a holistic view of the system and process a wide range of workloads to arrive at a single score. Some systems are required to excel at specific tasks - so it is often helpful to see how a computer performs in specific scenarios such as rendering, transcoding, JavaScript execution (web browsing), etc. This section presents focused benchmark numbers for specific application scenarios.

3D Rendering - CINEBENCH R23

We use CINEBENCH R23 for 3D rendering evaluation. R23 provides two benchmark modes - single threaded and multi-threaded. Evaluation of different PC configurations in both supported modes provided us the following results.

3D Rendering - CINEBENCH R23 - Single Thread

3D Rendering - CINEBENCH R23 - Multiple Threads

The relative placement of the different systems in both graphs above are as expected based on the CPU architecture, processor frequency, and core counts.

Transcoding: Handbrake 1.5.1

Handbrake is one of the most user-friendly open source transcoding front-ends in the market. It allows users to opt for either software-based higher quality processing or hardware-based fast processing in their transcoding jobs. Our new test suite uses the 'Tears of Steel' 4K AVC video as input and transcodes it with a quality setting of 19 to create a 720p AVC stream and a 1080p HEVC stream.

Transcoding - x264

Transcoding - x265_10bit

In the case of software transcoding, the relative numbers follow the same pattern as what was seen in the multi-threaded Cinebench R23 case (transcoding benefits heavily from multiple threads).

The RX 6400 has no hardware-accelerated encoding capabilities, and the Core i7-12700F has no integrated GPU. So, our DeskMeet B660 configuration has no numbers to contribute to the comparison of either VCE or QuickSync performance.

Archiving: 7-Zip 21.7

The 7-Zip benchmark is carried over from our previous test suite with an update to the latest version of the open source compression / decompression software.

7-Zip Compression Rate

7-Zip Decompression Rate

While the decompression rates are as per expectations, the DeskMeet B660 performs better than expected in the compression workload - likely due to the higher RAM speeds compared to the other DDR4-3200 systems in the mix.

Web Browsing: JetStream, Speedometer, and Principled Technologies WebXPRT4

Web browser-based workloads have emerged as a major component of the typical home and business PC usage scenarios. For headless systems, many applications based on JavaScript are becoming relevant too. In order to evaluate systems for their JavaScript execution efficiency, we are carrying over the browser-focused benchmarks from the WebKit developers used in our notebook reviews. Hosted at BrowserBench, JetStream 2.0 benchmarks JavaScript and WebAssembly performance, while Speedometer measures web application responsiveness.

BrowserBench - Jetstream 2.0

BrowserBench - Speedometer 2.0

From a real-life workload perspective, we also process WebXPRT4 from Principled Technologies. WebXPRT4 benchmarks the performance of some popular JavaScript libraries that are widely used in websites.

Principled Technologies WebXPRT4

The performance numbers in all three benchmarks and across all three browsers match expectations based on the capabilities of the processor in each system.

Application Startup: GIMP 2.10.30

A new addition to our systems test suite is AppTimer - a benchmark that loads up a program and determines how long it takes for it to accept user inputs. We use GIMP 2.10.30 with a 50MB multi-layered xcf file as input. What we test here is the first run as well as the cached run - normally on the first time a user loads the GIMP package from a fresh install, the system has to configure a few dozen files that remain optimized on subsequent opening. For our test we delete those configured optimized files in order to force a fresh load every second time the software is run.

AppTimer: GIMP 2.10.30 Startup

As it turns out, GIMP does optimizations for every CPU thread in the system, which requires that higher thread-count processors take a lot longer to run. So the test runs quick on systems with fewer threads, however fast cores are also needed. The higher memory speed (DDR4-3600) probably helps the DeskMeet B660, helping it edge out the Dragon Canyon NUC slightly.

Workstation Performance - SPEC Benchmarks GPU Performance: Synthetic Benchmarks
Comments Locked

27 Comments

View All Comments

  • ganeshts - Thursday, February 9, 2023 - link

    I apologize for the error in the comment above. There is plenty of space available on the inside of the inner frame to mount 2x 2.5" disk drives adjacent to the front I/O.

    Please check the first column in the picture here:

    https://www.asrock.com/nettop/sticker/MeetX300-Exp...

    Note that the 3.5" drive installation could cause interference with cabling if a dual slot GPU is installed, but 2.5" drives should not be an issue.
  • ganeshts - Friday, January 27, 2023 - link

    Yes, there is a 8-pin connector from the PSU. You can also check out the Graphics Card QVL on the ASRock website for the product. There are a few 3060 models in there.
  • Hrel - Thursday, January 26, 2023 - link

    still way too many trade offs, going smaller than mini-ITX just takes you out of the PC world in every meaningful way. GPU's that fit this thing are almost exclusively Nvidia and the fastest you can get is RTX3060... however with one fan on the card and that small space it's gonna die quickly, as well as the rest of these components.
  • Mr.Vegas - Friday, January 27, 2023 - link

    There is 3060ti made by asus that fits there, dual slot and less than 20cm
  • shrimp_parm - Thursday, February 9, 2023 - link

    "Since the DeskMeet B660 is a consumer-focused system, the UEFI has all the bells and whistles including the ability to update firmware directly from the Internet and fine-grained control of the fan speeds in relation to the temperatures."

    Is it possible to update bios via internet without the need for a 12th gen cpu, to accommodate 13th gen cpu's?

    Thanks
  • LMao HAHA - Sunday, March 12, 2023 - link

    I have one and want to know actually. I still need CPU and haven't build it since Nov. But I think if you bought one recently past 2023, it may have the 13th gen Bios ready.
  • marcelop67 - Monday, February 13, 2023 - link

    This makes a great little Proxmox server. I have installed an i5 12400, 128GB memory, dual Samsung 980 PRO 1TB, dual WD Red 2TD SATA SSD's and an Intel quad port PCIe card,
    When you are concerned about the M.2 SSD slot on the motherboard's underside, you can use a Be quiet! MC1 M2 SSD heatsink. It fits perfectly and reduces the operating temperature by ~15 degrees Celsius. (at least with my Samsung 980 Pro's).

Log in

Don't have an account? Sign up now