Aspire X-Cruiser (cont'd)
First, a quick glance at the inside of the side panel to see the CPU shroud in better detail. The shroud's height can be adjusted, thanks to its two-part design.
After taking off the side panel, the simplicity of the interior of the X-Cruiser is rather apparent. The motherboard tray isn't removable, nor do any of the drives have any dampening or tool-less features. This doesn't necessarily make for a bad case; it just separates it from more expensive cases and might actually make it more appealing to people who want a simpler unit.
Click to enlarge.
There are a total of six 3½” bays, two of which are external, and four 5¼” bays. In this close-up, you can see the two optional 80mm fan mounts in the front.
The rear-mounted 80mm fan is blue just like the top fan, which (as will see in a bit) has a big problem with placement. One nicer thing about the X-Cruiser is that the motherboard backing plate is removable via a bolt, something anyone who builds PCs regularly will appreciate quite a bit more than the pop-in plates, which are often a pain to work with.
Click to enlarge.
Installing our test bed went fairly smoothly, except for a problem with the top mounted fan. At first, we thought perhaps our longer-than-average PSU was to blame, so we double-checked by installing a shorter unit.
Even with a relatively standard sized PSU, the top fan mount is unusable unless the fan is mounted externally, rendering the included grill useless. With a longer PSU, such as our OCZ PowerStream, the fan is still able to get air, but the reduced opening might impact cooling performance. When a short enough PSU is used, the fan could still be used as it came in the package, leaving the top looking like this:
Notice that the reflection is clearly visible in the glossy finish of the case.
Facebook
Twitter
RSS
48 Comments
View All Comments
RupertS - Thursday, September 8, 2005 - link
The power supply is a good part of the total value of the case. Also, some of the cases may work better (cooling, sound) with the power supply they come with.Hard to compare prices like this.
johnsonx - Thursday, September 8, 2005 - link
Ditto that... this complaint has been leveled before of course:Anandtech should at least mention what power supply is (or can be) included with the case, and give some sort of subjective rating of same. For example, the Aspire case is most often available with a 420W power supply (usually a mere $15 or so more than the PS-less version), but I've heard it's crap... but maybe it isn't; I'd like Anandtech to tell me.
Likewise, the Sonata II ALWAYS (AFAIK) includes a SmartPower 2.0 450... doesn't that add significantly to the value equation? (granted, it'd be better if it were a TruePower 380 like the old Sonata, but a SmartPower 2.0 is nothing to scorn)
ElFenix - Thursday, September 8, 2005 - link
everyone should read the reviews on SPCR before setting up a system on this case. the reviews are very thorough and tests it in multiple configurations, and it turns out there are things you can do to improve its thermal performance by quite a bit (such as duct taping over the holes next to the power supply)flatblastard - Thursday, September 8, 2005 - link
Duct tape on a brand new case? I don't think so..... Well, I personally wouldn't do it, but for modders/OCers I guess it might make sense.fass mut - Thursday, September 8, 2005 - link
what's the link to the article?ElFenix - Thursday, September 8, 2005 - link
all three articles, the first is over main features, the second is an absolutely silent computer, and the third is more mainstream rigshttp://www.silentpcreview.com/article249-page1.htm...">http://www.silentpcreview.com/article249-page1.htm...
http://www.silentpcreview.com/article254-page1.htm...">http://www.silentpcreview.com/article254-page1.htm...
http://www.silentpcreview.com/article255-page1.htm...">http://www.silentpcreview.com/article255-page1.htm...
jonp - Thursday, September 8, 2005 - link
Doesn't an ATX extension cable for $4 cover the power supply to motherboard distance concern? Granted, Antec could have included it with the case; but it's NO big deal to resolve. Shouldn't be an issued when deciding.mjz - Thursday, September 8, 2005 - link
i hate lian li cases. I spent probably 200 dollars on their case (2 years ago) and it vibrates too much, the sound is pissing me off. I guess it can't handle my raptor or something.Tamale - Thursday, September 8, 2005 - link
I too agree that way too many of these cases are kinda ridiculous looking, but someone said it best when they said "the Eclipse must look better in person"... it really does. I liken it to those fancy cd players from places like brookstone and the sharper image..It's flashy, sure, but at least it's kinda 'classy flashy', if you know what I mean. If that kinda look still doesn't please you at all, there's always cases like the P-180 ;)
mkruer - Thursday, September 8, 2005 - link
Considering that I have a PC-V2000 Plus. I am in a unique position to voice my opinion for everyone reading this thread. I will say that yes the cases Lian Li cases are overly expensive, but considering that they are the only “all aluminum” case manufacture, and they have arguably the best design, they can get away with it. The main issues with an “all aluminum” case is that because aluminum is light then steal and yet does not have the absorbing capacity of plastic, aluminum as rule of thumb tends to be louder. However there are three things you can do o improve the noise ratio of the system. First is to install sound absorbing foam in the case. This will cut down on high pitched noise. Next is to install quieter fans. The Lian Li fans are good, but they are only about average in the noise to air ratio. Finally and this is the biggest thing. In order to cut down on the “wan wan” resonance sound coming form the case you need to suspend the drive is a sling and not it the mounting bays. This by far reduces the most noise.