Sapphire PURE Innovation - ATI's Chipset for the AMD Enthusiast

Overclocking: Sapphire PURE Innovation

Sapphire PURE Innovation
Overclocking Testbed
Processor:	Athlon 64 4000+ (2.4GHz, 1MB Cache)
CPU Voltage:	1.525V (default 1.50V)
Cooling:	Thermaltake Silent Boost K8 Heatsink/Fan
Power Supply:	OCZ Power Stream 520W
Memory:	OCZ PC3200 Platinum Rev. 2 (Samsung TCCD Memory Chips)
Hard Drive:	Seagate 120GB 7200RPM SATA 8MB Cache
Maximum OC: (Standard Ratio)	245x12 (4x HT, 2.5-3-3-10) 2940MHz (+22.5%)
Maximum FSB: (Lower Ratio)	302 x 9 (3x HT, 1T) (2718MHz, 2 DIMMs in DC mode) (+51% Bus Overclock)

We have rarely tested a board with such incredible stability in overclocking as this Sapphire ATI. It was not always easy to reach our desired overclock with all of the exceptional range of options available in BIOS, but once we reached the overclock, it was extremely stable. We did notice that the Sapphire ATI responds best to gradual increases in overclocking - it does not like, for example, to be set directly to 245 clock frequency. It will reach higher overclocks if the Clock frequency is increased gradually instead of in one fell swoop.

The Sapphire ATI reached a new record with our standard 4000+ Clawhammer. The highest previous overclock at stock multiplier was 242, but the Grouper went on to a stable 245. This would be quite an accomplishment for any board, but it is remarkable for a first production board. The 302 Maximum bus frequency was also a great performance. ATI clearly set out to build an enthusiast board for Sapphire that other manufacturers could copy down to the smallest detail. Sapphire was smart enough to recognize a good thing when they saw it and they have faithfully reproduced the original Reference board. Our advice to most manufacturers developing ATI Radeon Xpress 200 designs would be to copy the Reference Design. Unless you are certain that you can extract even more performance from this chipset, it is best to copy the top-performing Xpress 200 Reference boards - whether single-GPU or Crossfire Dual-GPU.

At settings of 2T, we could reach even higher to a frequency of 320. There is a lot of discussion on the web these days, claiming that you can minimize the impact of the 2T setting with certain options on Revision E AMD processors. We did not verify this claim in our tests with an earlier standard Clawhammer processor, but we can tell you that all the talk about options for improving 2T performance modes are in the memory timings section. It is little touches like this that tell us that enthusiasts in ATI or Sapphire or outside the company have had a big hand in the design of the Radeon Xpress 200 family of chipsets.