Chaintech VNF4-Ultra: Features and Layout

 Specification  Chaintech VNF4-Ultra
CPU Interface Socket 939 Athlon 64
Chipset nForce4 Ultra (single chip)
BUS Speeds 200MHz to 400MHz (in 1MHz increments)
PCI/AGP Speeds Asynchronous (Fixed)
PCI Express 100MHz to 145MHz in 1MHz increments
Core Voltage Auto, 0.90V to 1.70V in 0.025V increments
DRAM Voltage Default, 2.7V, 2.8V, 2.9V
Chipset Voltage Default, 1.6V, 1.65V, 1.7V
Hyper Transport Ratios 1x to 5x in 1x increments
LDT Bus Transfer 16/16, 16/8, 8/16, 8/8
LDT Voltage Normal, +0.1V, +0.2V, +0.3V
CPU Ratios Auto, 4x to 25x in 1x increments
DRAM Speeds Auto, 100, 133, 166, 200
Memory Command Rate Auto, 1T, 2T
Memory Slots Four 184-pin DDR Dual-Channel Slots
Unbuffered Memory to 4GB Total
Expansion Slots 1 x16 PCIe Slots
2 x1 PCIe
3 PCI Slots
Onboard SATA 4-Drive SATA 2 by nF4
Onboard IDE Two Standard NVIDIA ATA133/100/66 (4 drives)
SATA/IDE RAID 4-Drive SATA 2 PLUS
4-Drive IDE (8 total)
Can be combined in RAID 0, 1
Onboard USB 2.0/IEEE-1394 10 USB 2.0 ports supported nF4
No Firewire
Onboard LAN Gigabit PCIe Ethernet by Vitesse VSC8201 PHY
Onboard Audio Realtek ALC850 8-Channel codec with 6 UAJ audio jacks, CD-in, front audio, and optical SPDIF
Other Features AMD Dual-Core (X2) Support with 5/18 Beta BIOS
BIOS Award 6/03/2005

The Chaintech was one of the motherboards that we had looked forward to testing. It is very inexpensive, and the last Chaintech that we tested, the Socket 754 VNF3-250, was an Editors Choice for value. Chaintech has repeated an outstanding selection of useful overclocking adjustments in the VNF4-Ultra BIOS. The features are also first rate for an Ultra board selling for $89 street price, with Firewire being the only missing feature of importance to some buyers. Even the excellent NVIDIA "any-drive" RAID for SATA 2 and IDE is fully supported, along with the standard NVIDIA chipset-based Firewall and LAN features. Chaintech has also implemented a really nice boot screen option. When selected in the BIOS, the boot screen shows post codes during boot so that you can see exactly what is going on and where problems might be.


Click image to enlarge.

While a little smaller than the other nF4 Ultra boards, Chaintech has compensated with a different layout that works very well in most cases. The 4 DIMM slots move to the top, with the Socket 939 moved towards the center of the board. This allows Chaintech to place almost all the storage connectors on the right edge of the board where they usually work best. SATA and IDE are well clear of the PCIe slot. The nF4 floppy connector is at the lower right of the board - not the best location, but much better than at the bottom of the board.

The only real compromise that Chaintech made with the smaller board was placing the 24-pin ATX and the 4-pin 12V between the CPU and rear panel connectors. No matter how you run the bulky 24-pin cable, it gets in the way of something - memory or CPU or IDE/SATA connections - and none of the routing options is really a great choice. Chaintech builds to a price point, and if this is the concession that had to be made for performance, we will find a way to live with it. That doesn't mean that we have to like it though.

At first, we thought that Chaintech had omitted an optical or coaxial SPDIF port, but looking closer, we found that the top left audio port (the blue connector) does double-duty as an optical SPDIF out port.

When we first received the Chaintech for evaluation, it was supplied with a passive heatsink for the single-chip nForce4 Ultra chipset. Chaintech sent an announcement that they had updated the design for active chipset cooling due to high temperatures with the nF34 chipset. Soon thereafter, we received an active cooling kit for the VNF4-Ultra that was a very easy installation. Chaintech tells us that current boards should be equipped with active cooling for the chipset.

Biostar NF4UL-A9: Overclocking and Stress Testing Chaintech VNF4-Ultra: Overclocking and Stress Testing
Comments Locked

75 Comments

View All Comments

  • vijay333 - Wednesday, July 6, 2005 - link

    oh...final system will have 4-5 HDs, standard DVD reader/writer along with (most likely) a 6800Ultra or a X800XL...
  • Xenoterranos - Wednesday, July 6, 2005 - link

    Anandtech did toy with a listening test a while back (I really don't remember much about it, other than the fact that they should have used Klipsch proMedia Ultra 5.1 speakers...)
  • vijay333 - Wednesday, July 6, 2005 - link

    Maybe I missed this info in the article somehow, but could you provide the minimum/recommended PSU wattages for the motherboards? esp the DFI and the Epox. I have a Antec 400W Smartpower PSU right now, but read a few posts on newegg that this might not be enough? Hope I don't need to upgrade this too along with the mobo, cpu and gpu...
  • vijay333 - Wednesday, July 6, 2005 - link

  • knitecrow - Wednesday, July 6, 2005 - link

    I have a comment about audio -- a topic that most sites ignore.

    Shouldn't there be a blind listening test?


    i mean cpu utilization is fairly useless. If i am listening to mp3s i care more about the quality than cpu utilization.
  • flatblastard - Wednesday, July 6, 2005 - link

    I stopped reading on page 4 upon discovering the round-up. No explanation needed...
  • Wesley Fink - Wednesday, July 6, 2005 - link

    g33k -
    The DFI was more a control to demonstrate SLI and Ultra performance were the same other than SLI video. Drivers have updated and we retested everything on the DFI as a sanity check. We ran benchmarks and not a full review, but it was hard to ignore the excellent performance.

    There is also a comment in our Final Words that the MSI Ultra board should also be considered a winner, since the SLI version was a Gold Editors Choice in the SLI roundup, and the Ultra should perform the same.
  • g33k - Tuesday, July 5, 2005 - link

    Along the same logic though, I'm curious as to why you chose to review the DFI Ultra-D when you reviewed the SLI version of this board earlier as well?.
  • g33k - Tuesday, July 5, 2005 - link

    Jeez, read Wesley's comments, he just answered why he did not review, the MSI board. It was already reviewed in the SLI roundup.

  • Wesley Fink - Tuesday, July 5, 2005 - link

    "As you can see, none of the onboard audio solutions were quite as low in CPU utilization as the Creative SoundBlaster Live! Chip, which is used on the MSI K8N Neo4 SLI Platinum tested in the nForce4 SLI roundup."

    Since this is still nF4 we included components tested on all nForce4 boards. The Ultra version of the MSI, BTW, uses the Realtek ALC850 chipset and not the Sound Blaster Live!. The SB Live! is only used on the MSI SLI.

Log in

Don't have an account? Sign up now