nForce4 Ultra Roundup: Charting the Mainstream
by Wesley Fink on July 5, 2005 10:28 PM EST- Posted in
- Motherboards
The Roundup
The seven motherboards in this roundup represent a broad range of available motherboards based on the nForce4 Ultra chipset. Also, keep in mind that the four SLI motherboards tested in nForce4 SLI Roundup: Painful and Rewarding are also available in cheaper nForce4 Ultra versions. Since the DFI nForce4 SLI was the co-winner of the SLI Gold Editors Choice and is readily available in an nForce4 Ultra version using the same layout and BIOS, we ran the same benchmarks on this board and included results for the nF4 Ultra board in this roundup. You can also find a launch review of the DFI Ultra and SLI chipsets at DFI nForce4: SLI and Ultra for Mad Overclockers.The four boards in the SLI roundup should perform the same as the Ultra versions of the same board running a single video card. The SLI and Ultra chipsets are the same chipset with different features enabled. You can see this clearly in the fact that early DFI nF4 Ultra boards could be easily modified to SLI by closing a component pair as we showed in Morphing nForce4 Ultra into nForce4 SLI. This means that you can compare single video results from our nForce4 SLI roundup if you are considering purchasing an nF4 Ultra version of the Asus, Gigabyte or MSI.
The boards in the roundup cover a very wide range of selling prices, from the clustering of the Chaintech/Foxconn/ECS/Epox/Biostar in the $92 to $112 range, the DFI at about $135 to the high-end Abit Fatality at $185. Included in the roundup are the Chaintech VNF4 Ultra, Winfast (Foxconn) NF4UK8AA, ECS KN1 Extreme, Epox 9NPA+, Biostar NF4UL-A9, and Abit Fatal1ty AN8. Test results are also included for the DFI LANParty UT nF4 Ultra-D, which was reviewed in DFI nForce4: SLI and Ultra for Mad Overclockers.
Facebook
Twitter
RSS
75 Comments
View All Comments
Zebo - Wednesday, July 6, 2005 - link
Does ECS build EPOX's boards? just curious because they look pretty cheap like ECS IMO..Heidfirst - Wednesday, July 6, 2005 - link
"[b]#19 and Others - I'm sure you must have noticed that some web sites have never posted a negative review of an Abit board. Also water cooling and asynchronous ram is hardly comparable to our air-cooled tests.The first thing I did was check other reviewers and users of the Abit board. The great majority are running into problems at about 250 FSB - although a few are getting better performance. Abit has had so many complaints about the OC performance of this board that I would fully expect a hardware revision on the horizon.[/b]"
Well the Fatality AN8 SLi, AN8 SLi, AN8 Ultra, AN8 V2.0 & AN8-V are effectively the new revision as I pointed out. Why buy a Fatality AN8 when the AN8 Ultra has better Vcore, better sound & is cheaper?
& people have had HTT395 & DDR660 out of them on air ...
Heidfirst - Wednesday, July 6, 2005 - link
Wesley Fink - Wednesday, July 6, 2005 - link
#19 and Others - I'm sure you must have noticed that some web sites have never posted a negative review of an Abit board. Also water cooling and asynchronous ram is hardly comparable to our air-cooled tests.The first thing I did was check other reviewers and users of the Abit board. The great majority are running into problems at about 250 FSB - although a few are getting better performance. Abit has had so many complaints about the OC performance of this board that I would fully expect a hardware revision on the horizon.
Abit set the expectation that the AN8 Fatal1ty was the best of the best with a price tag to match. It's an interesting board with many interesting features, but it's performance as it now stands is nowhere near the best.
TheGlassman - Wednesday, July 6, 2005 - link
I think that a round up such as this would serve the readers better if three types of memory were used and various dividers used.My Chaintech VnF4 is running at 256x11 quite happilly, so I know it will run well over 245 with a divider with my memory, and I'm sure most of the other boards as well. And yes, many people run it over 300 HTT with lower multi cpu's.
This is not to say that 1:1 testing is not important, but since this is a round up, the various needs and budgets of your readers should be taken into account.
Seeing bios's used that are dated during the testing, with a known single memory may if repeated cause readers to think that Anandtech doesn't deserve it's well earned reputation as a fair and complete tester of all things important to PC ethusiasts.
Using memories with 3 different types of chips and using relevant dividers to find maximum HTT's and cpu speeds with each, while being more work, I think will be worth while to your readers, especially in a round up where boards are compared directly to each other.
This current round up implies that most nF4 boards are not capable of high HTT's, but the truth is you have only shown that most do not run one type of memory at very high speeds. You have not exposed the limits of the boards, nor do we know if the situation is the same with any of the other commonly used memories.
bldckstark - Wednesday, July 6, 2005 - link
Xpose-Not too early. I don't have my board yet. I have been waiting on X2. Using your same logic that means that nobody has a board yet right? I mean, since I am the only person I know that is going to build a A64 system soon then I should assume that nobody has one.
Geez
xpose - Wednesday, July 6, 2005 - link
This Editor's Recommendation for best motherboard is at least 3 months too late. We already have had all of our boards.Also, to say that the VN4F Ultra is a bad overclocking board is completely wrong. I have a 3000+ CPU running at 2.67gz now. That is about 49% OC and damn good reguardless of the MB.
Son of a N00b - Wednesday, July 6, 2005 - link
great article! you can clearly see the hours of hard work you put into it. Great Job, I enjoyed it and it was jam packed with info.one quuestion though where was the gugabyte board ultra board?? sure you may have reviewed it in the SLI roundup, but then did you not do the same with DFI? Plus you had great results with the reference gigabyte board, but not the revision 1 board...i'd like to see how ir fairs now...maybe i missed something why you reviewed the DFI board again becuase I am not familiar witha ll their variations and naming scheme, but to me it looked the same...why review that one and not the others? sure its great to rehash what a great board the DFi one is but....
just wondering as I have always had great success with gigabyte boards...but i probably missed something even thought i read it back to front, sorry if i did as i know that you would never do something without a good reason behind it...
anyway thanks, keep the awesome articles rolling...
smn198 - Wednesday, July 6, 2005 - link
Hi Wesley, thanks for the clarification on the HTT. do you know if it would have any more of an impact when dual core is brought into the equation?Thanks again. Good article BTW!
BigandSlimey - Wednesday, July 6, 2005 - link
#18 I really like that idea, would probably be a headache to make it and keep it updated though.