DDR436/2.4GHz Performance

DDR436 (2.4GHz) Gaming Performance

DDR436 (2.4Ghz) UNBuffered Memory Test

DDR436 (2.4GHz) Standard (Buffered) Memory Test

DDR436 (2.4GHz) Calculation Performance

DDR436 (2.4GHz) Gaming Performance

DDR436 (2.4GHz) - Read Speed

DDR436 (2.4GHz) - Write Speed

DDR436 (2.4GHz) - Memory Latency


DDR400/2.4GHz Performance DDR480/2.4GHz Performance
Comments Locked

102 Comments

View All Comments

  • segagenesis - Tuesday, April 12, 2005 - link

    Meh, I am lost for the life of me here. I dont see what the big fuss is over Value VX when I still cant find it. To save the comments http://tinyurl.com/46vg6 this doesnt look like the memory reviewed in the article being 3-4-4-8.

    Seeing how http://www.newegg.com/app/viewproductdesc.asp?desc... is $87 and I already have some and know it works well... im hard pressed to think I really need to buy "mystery memory".
  • Illissius - Tuesday, April 12, 2005 - link

    Finally, is what I can say. However, if you really mean it when say you want to test real life performance, you should test with stuff from the actual standard benchmark suite - Quake 3 might show impressive gains from higher memory bandwidth, but does the same hold true for Doom 3?

    xsilver: While I agree that testing with the insane voltages available on DFIs limits the scope of the article somewhat, and results for lower voltages would've been nice to see (or at least mentioned specifically, it seems they're actually there for the BH5, though not the VX), I'm frankly more annoyed with all the other motherboard manufacturers for not allowing higher voltages (Abit in particular), than I am with AT for going ahead and testing with the only one that does. I wouldn't call it advertisement, more like a fair appraisal of capabilities.
  • Den - Tuesday, April 12, 2005 - link

    I thought it was interesting to see in the charts that the Crucial Balistix which are $204 right now ($106 each but 4% off if you buy two and therefore JUST missed the price cutoff for this review) were consistently very good (faster than almost everything in this review) and are the only ones that can be that fast on more normal (non-DFI) voltages.
  • xsilver - Tuesday, April 12, 2005 - link

    Im not saying the dfi is bad or expensive.... its just that if you review with features that only the dfi can provide its not really a review / roundup anymore ..... its called an advertisment.... where's the choice?????
    I expect that dfi shareholders to be laughing really loud right now.... and OCZ too....
  • bigtoe36 - Tuesday, April 12, 2005 - link

    Value VX is $115 if you shop around, how does this count it out of a value roundup?

    Should AT have only reviewed value ram that performs poorly?
  • OrSin - Tuesday, April 12, 2005 - link

    #40 actually alot people would do just that.
    The DFI mother is not really that expensive.
    Asus and gigabit are the the same price. 6800GT cards are high but if you want the best cards you buy them, to play the games. But how many times have anyone said what type of ram you need to play Doom 3 or HL. No one. If you don't over clock, then $90 ram will slow you system down what 1-2% over $300 ram. I got a A64 3400 and 800XL and kingmax ram. And my system runs alot fat then my friend with with a just 800 and $250 ram.

    Sorry but buying high priced ram are mostly for over clockers and most people don't do that. Alot on these tech sites do, but my guess is even most people that buy $200+ ram don't

    The review was nice to me.
  • xsilver - Tuesday, April 12, 2005 - link

    another thing I want to clarify is that you make the assumption that you must be a "mad overclocker" if you buy the dfi because it can do 3.4v and all others that dont have the dfi are just posers..... many people would disagree but you seem to not notice???

  • xsilver - Tuesday, April 12, 2005 - link

    wesley
    I understand what you say about making things consistent but arent then you just promoting the dfi board as no other board supports 3.4v? what about people who are going nforce 3 or intel (god forbid :P)
    in trying to maximize the potential of the ram, you are limiting the practical application...

    an analogy would be "in testing a ferrari its performance is great when drive it with brand X of fuel and feed it liquid oxygen".... umm... what about the rest of the people that dont use that?... that's why car reviews talk more about the "feel" & handling of the car, things that can be appriecieated by ALL customers....

    and by specifying that this review was more for "mad overclockers" that may use the dfi then why even review the cheaper solutions that dont even overclock at all... I mean its not exactly fair when you compare the really cheap ram to some OCZ VX values now is it?

    On one hand you try and generalize to the broader market but then on the other you say that you're only catering to the "mad overclockers" that buy the dfi
    your original scientific basis / aim is a little unsound
  • bigtoe36 - Tuesday, April 12, 2005 - link

    If your looking for value VX look here.

    http://www.atacom.com/program/print_html_new.cgi?c...

    http://www.newegg.com/app/ViewProductDesc.asp?desc...

    Look closely at the part number is has WV which stands for with winbond die, timings are usually 3-4-4-8 or 2.5-3-3-8 buit its all the same stuff.
  • adg1034 - Tuesday, April 12, 2005 - link

    Where exactly can you find the Value VX? Do you have a model number? I was going to buy the Corsair Value RAM, but after reading this, I definitely think I'm going OCZ.

Log in

Don't have an account? Sign up now