The Samsung 870 EVO (1TB & 4TB) Review: Does the World Need Premium SATA SSDs?
by Billy Tallis on February 17, 2021 8:00 AM ESTMixed IO Performance
For details on our mixed IO tests, please see the overview of our 2021 Consumer SSD Benchmark Suite.
 |
|||||||||
| Mixed Random IO | Mixed Sequential IO | ||||||||
The mixed random IO test provides the Samsung 870 EVO with one of its biggest performance wins yet over the rest of the SATA field and the entry-level NVMe competition. But most of that comes from the capacity advantage the 4TB model has over most of these comparison drives; the 1TB 870 EVO is only about 5% faster overall than the 860 EVO. On the mixed sequential IO test, the SATA bottleneck keeps most of the performance scores within a fairly narrow range, and the 1TB 870 EVO's performance is actually a bit of a regression compared to its predecessor.
 |
|||||||||
| Mixed Random IO | Mixed Sequential IO | ||||||||
As with our separate tests of random reads and writes, the top efficiency scores for mixed random IO go to SK hynix, with Samsung's TLC drives turning in the next best scores and having a clear advantage over other competing brands. Over on the sequential IO side of things, the efficiency scores more closely mirror the performance scores, and the 870 EVO doesn't have any real advantage over other mainstream SATA drives.
 |
|||||||||
| Mixed Random IO | |||||||||
| Mixed Sequential IO | |||||||||
The 1TB 870 EVO's performance during the mixed random IO test is more consistent than the 860 EVO's, but still has a few unpleasant drops that aren't present for the 4TB model. On the mixed sequential IO test, the 1TB 870 EVO's performance is actually a bit less consistent than the 860 EVO. But aside from those occasional outliers, the general trend is for the 870 EVO to provide superior random IO performance and link-saturating sequential performance across a wide range of workload mixes.
Idle Power Management
Real-world client storage workloads leave SSDs idle most of the time, so the active power measurements presented earlier in this review only account for a small part of what determines a drive's suitability for battery-powered use. Especially under light use, the power efficiency of a SSD is determined mostly be how well it can save power when idle.
SATA SSDs are tested with SATA link power management disabled to measure their active idle power draw, and with it enabled for the deeper idle power consumption score and the idle wake-up latency test. Our testbed, like any ordinary desktop system, cannot trigger the deepest DevSleep idle state. For more details, please see the overview of our 2021 Consumer SSD Benchmark Suite.
The Samsung 870 EVO may feature an updated controller compared to the 860 EVO, but there's no real difference in idle power consumption, for either active idle or the desktop (non-DevSleep) idle states. Samsung's idle power figures are best in class, with SK hynix offering the only close competition.
The Samsung SATA drives all take about one millisecond to wake up from using SATA link power management. This is higher than several of the other SATA drives, but not really enough to be of much concern for system responsiveness.
Facebook
Twitter
RSS
136 Comments
View All Comments
Krimzon - Wednesday, February 17, 2021 - link
Early USB standards were uni directional. 3 and 4 are full duplex.PixyMisa - Thursday, February 18, 2021 - link
10Gbps USB is already twice as fast as 6Gbps SATA because it uses more efficient encoding. 20Gbps USB is available right now, and 40Gbps is part of the USB 4 spec though I don't know how widespread support for it is.Wereweeb - Wednesday, February 17, 2021 - link
No need to replace SATA, it will die by itself. What we need is high-end consumer motherboards to get U.3.Billy Tallis - Wednesday, February 17, 2021 - link
U.3 is probably only going to be around for two or three product cycles. It's very much a stopgap solution to unify U.2 and SAS, both of which are already on the way out in favor of EDSFF.Wereweeb - Thursday, February 18, 2021 - link
Great! Then they can introduce it for consumers to have 2.5" drives again.Leeea - Wednesday, February 17, 2021 - link
The nice thing about SATA SSDs is they tend to just work. Pull one out of one system, stick them in another, and it can boot.The pci drives seem to be a lot more fussy with that.
danbob999 - Wednesday, February 17, 2021 - link
Not really. All drives (IDE / SATA / NVMe / USB / Whatever) pretty much just work. The problem is the OS may not boot. When switching to a different protocol (say SATA to NVMe), you increase chances it won't boot.Linux is easier to get to boot than Windows when changing the drive to a different system.
Jorgp2 - Wednesday, February 17, 2021 - link
Nah, it all comes down to EFI vs MBR.MBR systems just look for a boot partition and boot it, EFI actually stores the location on the motherboard flash.
WaltC - Wednesday, February 17, 2021 - link
Agreed...;) I might say "UEFI vs. Legacy," though. And much of it has to do with the knowledge, experience, and skill of the computer operator...! No question about that. (It's actually MBR vs. GPT--GPT is better. All of my SATA HDDs are formatted GPT, etc. I have no MBR-formatted drives.)The list of NVMe drives here is curious. Where is the 980 Pro from Samsung?--been selling for a while now--one of several PCIe4 NVMe drives available. Makes me question when this article was actually written....? It seems incomplete or out of date. Samsung is a chip company no longer in the business of making platter drives (last I looked, anyway-do they still sell the Spinpoints?), so it's natural for them to sell SSDs of varying types, sizes, and prices, imo.
Billy Tallis - Wednesday, February 17, 2021 - link
I deliberately chose not to include 980 PRO results in the graphs for this review, because that's a silly comparison to make against a SATA drive. But if you really care, you can use Bench: https://www.anandtech.com/bench/product/2724?vs=27...