Dell UltraSharp 1905FP: Setting the Bar for New 19" LCDs
by Kristopher Kubicki on January 29, 2005 12:35 AM EST- Posted in
- Displays
User Interface
The 1905FP uses an interface familiar to anyone who has used a Dell LCD before. All input is controlled by the four buttons on the lower right corner of the monitor.
If you have seen one Dell on screen display, you have seen them all. Even the Dell 1702FP has the same look and feel as our 1905FP display.
Click to enlarge.
Using the DVI input, the monitor limits our ability to change anything other than the brightness and the color presets. We were a little surprised that the monitor gave us control of the color presets, since the digital signal should replicate accurately what the video card is rendering. To us, the red and blue presets were extremely uncomfortable. In the menu above, the items with gray boxes around them are unavailable.
Like Dell's previous performance monitors, the UltraSharp 1905FP screen can pivot 90 degrees on its side to convert the 19" 5:4 aspect ratio into a 4:5 ratio instead. Unfortunately, no pivot software or drivers came with the monitor, so we had to rely on third party tools.
There is also a slight clearance problem at the bottom of the monitor if we attempt to rotate with the screen at its lowest height setting. Fortunately, the UltraSharp 1905FP utilizes a universal joint in the back, so we only need to tilt the screen backward a little to compensate. Unfortunately, this is a little clumsy. In the end, the clearance problem isn't a big deal, but it can be a minor annoyance.
Facebook
Twitter
RSS
66 Comments
View All Comments
TheDotProduct - Monday, January 31, 2005 - link
TheDotProduct - Monday, January 31, 2005 - link
Gelisob - Monday, January 31, 2005 - link
wow, a "that car looks nice, i dont care howmany horsepowers it has, no dont tell me how much gas it takes, so what i maybe can only drive it backwards, it doesn Look that bad" kind of guy :)gg hf :P
blckgrffn - Monday, January 31, 2005 - link
Have you guys looked at newegg? There are a ton of 19" LCD's under 350 - I just picked up one with DVI and 21ms response time 600:1 contrast for $320 - no rebates or anything. I have never heard of CVM, but the monitor looks very nice, IMHO.Later,
Nat
rivethead - Sunday, January 30, 2005 - link
Does anyone know if the Dell UltraSharp 1705FPT is also a Samsung panel and/or an 8-bit panel?I've asked the folks at Dell this 6 times over the past two weeks. They have no idea. It's been a very frustrating experience for me. Maybe I'm asking the question wrong, but you would think "Is the Dell UltraSharp 1705FPT an 8-bit or 6-bit panel?" is pretty clear enough.
Supposedly it's a 13ms response time monitor, so I'm betting it's 6-bit. I just can't seem to find a 17" 8-bit panel with a response time less than 25ms.....
Sorry if you've already read this question on the "General Hardware" forum.
rivethead - Sunday, January 30, 2005 - link
Nessism - Sunday, January 30, 2005 - link
The comments below were stolen from another Anandtech member Sharkeeper :)I find a good test is go here.
http://science.nasa.gov/RealTime/JTrack/3D/JTrack3...
Accept any security messages you get. When the applet loads, maximise the window. It should look like this. Use your mouse to move the position of the globe. All those white pixels are indicating where satellites are in real time. If you orient the orbit lines parallel to the Y axis (up and down) and drag the mouse around you will perform a very good test on pixel update rate. Slower monitors will cause the satellites to disappear in the background as the scene is moved. Faster monitors will show them available at all times.
Nessism comments:
When moving the satellites on my 1905, they change from being a dot to being a small moving line (ghosting image of the dot). I'm not trying to bash this monitor, after all I do own one, just want to make people understand that there are limitations.
Good test.
Nessism - Sunday, January 30, 2005 - link
I have a 1905 and can assure everyone that it DOES ghost when moving quickly. As stated, everyone has a different sensitivity level...just don't expect this thing to perform like a CRT for fast motion because it does not. If you want a true gamming monitor, check out one of the fast TN monitors like the new Hyundai; they give up viewing angles and color but they are fast.Fast with small viewing angles (TN) or slightly slower with better color and viewing angles (PVA). Take your pick, you can't have both.
OvErHeAtInG - Sunday, January 30, 2005 - link
Looks like a great deal but I can relate: having a "dell" logo on something I own is just not kosher. :) Good thing I'm not in the market for an LCD.My viewsonic vp181s has a usb hub, I didn't think it was that rare.
Call me bass ackwards, but I think 1280*1024 is just right for 19". Okay my panel is 18.1" but I would like to be able to sit a few inches father away and still read standard-sized text. On a notebook you're going to be sitting closer, so a little more resolution is okay, but those microscopic ones with 12" screens and huge resolutions are over the top. Most people I've seen turn the res down, which is a shame b/c then you're wasting the screen's potential.
Regarding the aspect issue, yes 1280*1024 is a little "squished," there's more vertical pixels. 1280*960 would be the "usual" 4:3 aspect ratio. To anyone thinking this is a drawback, honestly you don't notice that everything's a little shorter, I've been working at that res for some time.
Gelisob - Sunday, January 30, 2005 - link
Hello all,Some words to all the crt-to-lcd gamers out there, buzzled with anandtech guys politicaly correct statements about gaming on it:D
I happen to have Samsung 193P, so it's pretty much the same panel and so on.
long story short:
1. If you play stuff like mmo's and rts games, you will have no problems, and all gain from picture quality + less strain on eyes (than crt)
2. If you play stuff like CSS, UT2k4, BF1942, you will have serious ghosting. Dunno how come they dont see or recognize it. So shooting stuff wile running AND turning, is not simple, you must stop moving to aim properly.
I offer very simple way to see it, for Anandtech guys too, just fire up bf1942 and move the view left/right fast, with mouse, edges of buildings and vehicles etc jump over the screen, not like OMG wtfbbq is that wall doing here, but its indeed "ghosting", it doesnt exacly get in a way but it disturb seeing clearly and fast, while moving whole picture.
ps. I cant figure out how to set backlight temperature on my 193p, there is no temperature option in the soft, brightness isnt temperature.. can anyone help me find it? thnx in advance