GIGABYTE B550 Vision D

Aiming more towards content creators and resembling its Designaire models, the GIGABYTE B550 Vision D includes a mid-range set of features. Spearheading what the Vision D has to offer includes an Intel Titan Ridge Thunderbolt 3 interface which powers the two Type-C ports on the rear panel, with two M.2 slots, four SATA ports, a Realtek ALC1220 HD audio codec and two Intel-based Gigabit Ethernet ports.

Opting for a clean-cut aesthetic, the GIGABYTE B550 Vision D uses a black and white contrasting design with white heatsinks on an all-black PCB. Dominating the lower portion of the board are two full-length PCIe slots which operate at PCIe 4.0 x16 and x8/x8, while the third full-length slot is locked at PCIe 3.0 x4. For storage is two M.2 slots with individual heatsinks with the top slot operating at PCIe 4.0 x4, and the second slot at PCIe 3.0 x4, while for SATA devices, a total of four SATA ports are included. The B550 Vision D has impressive memory support with speeds up to DDR4-5400 supported out of the box, and a maximum capacity of up to 128 GB across four memory slots.

On what is a pretty stacked rear panel are two Thunderbolt/USB 3.2 G2 Type-C ports which include support for DisplayPort output due to the presence of an Intel Ridge Thunderbolt 3controller, with a further two USB 3.2 G2 Type-A, four USB 3.2 G1 Type-A and two USB 2.0 ports. For the leveraging of Ryzen APUs with integrated graphics, GIGABYTE has included a DisplayPort 1.4 and HDMI 2.1 pair of video outputs, while an Intel AX200 Wi-Fi 6 interface and a pair of Intel Gigabit Ethernet controllers make up the Vision D's networking capabilities. A Realtek ALC1220-VB HD audio codec drives the five 3.5 mm audio jacks and S/PDIF optical output, while a PS/2 keyboard and mouse combo port allows users to use legacy peripherals. 

The GIGABYTE B550 Vision D is an interesting board for a couple of reasons, some very positive and some a little confusing. Starting with what's good, it is advertised as featuring a robust 12+2 power delivery, with the inclusion of an Intel Titan Ridge controller for dual USB 3.2 G2 Type-C ports. It's also one of the best looking B550 models on the market and supports up to DDR4-5300 memory which is impressive. GIGABYTE's decision to opt for Gigabit LAN when cheaper boards include 2.5 GbE Ethernet is a tad confusing. It's also one of the only models, if not the only model to include Intel Gigabit as opposed to Realtek Gigabit Ethernet. The B550 Vision D also has a hefty price tag for a B550 model with an MSRP of $260, putting it as one of the most expensive B550 models on the market, but does benefit from Thunderbolt 3, and two full-length PCIe 4.0 slots which operate at x8/x8.

GIGABYTE B550 Gaming X GIGABYTE B550M DS3H
Comments Locked

101 Comments

View All Comments

  • Savikid - Tuesday, August 25, 2020 - link

    But the new oculus stuff only uses 1 usb port, so that right there is a drop. I use 2 for keyboard and mouse, one for a wireless controller, and one for my HMD.
  • Gigaplex - Tuesday, June 16, 2020 - link

    "On that one I added a USB PCI card to get enough ports."

    That's not really helpful to the user who said they can't add in a card on their mITX system.
  • eye4bear - Wednesday, July 1, 2020 - link

    Must be nice to have no external hard-drives, I have 3 all needing their own USB 3 port, along with a Logitech dongle that runs both my mouse and keyboard, finally a Bluethooth dongle as my computer has none built-in. Yes I would need 6 USB ports (one open for USB sticks) just to keep even.
  • consolessuck - Friday, November 6, 2020 - link

    No, I have 3 usb ports on my laptop and i only use 1 for my mouse. As it turns out, the most amount of usb ports i use at once is two when i am making a wired data transfer with my mouse plugged in. Actually, I almost never transfer data to my phone with a wire, instead just sharing them via bluetooth. and considering i never make large data transfers to my phone, this works out just fine. as for a desktop, however, i'd like a minimum of 3 as i'll always have not only a mouse, but a keyboard plugged in all the time.
  • taz-nz - Thursday, June 18, 2020 - link

    The Asrock B550M Steel Legend has 8 port on the back:
    4x USB-A 3.1 ports
    1x USB-A 3.2 port
    1x USB-C 3.2 port
    2x USB-A 2.0 ports

    And you still have two USB 2.0 internal header, plus two USB 3.1 internal headers.
    So that allows you to have another
    4x USB-A 3.1
    4x USB-A 2.0 ports.

    so that's 16 Ports
    Now if you like me and need Internal USB 3.2 USB-C header, you can use the PCIe 3.0 x2 m.2 slot to add one of these:
    https://www.delock.de/produkte/S_63998/merkmale.ht...

    or if you want two more USB 3.1 internal header you could add one of these:
    https://www.delock.de/produkte/G_62843/merkmale.ht...

    So if you can live without a second m.2 slot you have four more USB-A 3.0 ports.
    That gives you 20 USB ports without giving up a PCIe slot.
  • taz-nz - Thursday, June 18, 2020 - link

    oops, just noticed you said mITX not mATX
  • desii - Tuesday, June 16, 2020 - link

    Do any of these motherboards support ECC RAM (either buffered or unbuffered)?
  • drSeehas - Wednesday, June 17, 2020 - link

    Socket AM4 CPUs support only unbuffered RAM.
  • PixyMisa - Wednesday, June 17, 2020 - link

    I did a quick look on ASRock's site, since they're pretty good on ECC support, and every B550 board I checked lists ECC as supported.
  • Samus - Tuesday, June 16, 2020 - link

    I think AMD screwed up here with pricing their platforms appropriately. I understand the push for PCIe 4 but they can't have average motherboard prices hovering between $200-$300. There has to be $100 motherboards to be taken seriously especially by OEM's if they want 4000 parts to become mainstream.

    But maybe they don't...maybe they plan to milk the 3000 parts for a few years. After all, there isn't much reason not too. They have no competition from Intel in the budget segment right now.

Log in

Don't have an account? Sign up now