How about a walk on the beach?

Just like in the original Half Life, Half Life 2's levels are split into multiple parts and are loaded as you encounter them in order to make the game flow more like a story rather than your average first person shooter.  Our next benchmark is a continuation of the d2_coast levels: d2_coast_12. 

This particular demo takes place on a beach during the early morning.  In the demo, our player walks along the beach only to be ambushed by a few soldiers, which he mows through with ease.  Here's where things get interesting though; one of the most stressful shaders in the entire game is located in the d2_coast_12 level.  There are a couple of huts armed with machine guns placed on the beach, but to protect the operator of the gun there's a bit of protective glass much like a windshield at the front of the huts.  The glass shaders end up severely reducing frame rate, although with all of the cards we have here the game is still playable. 

Our player stares at the glass of one of these huts for a bit before moving on, finally coming across a couple of enemies in an elevated hut.  The player fires a few rockets at the hut, which produce explosions that are also fairly GPU intensive, while being shot at from above.  The demo closes with our player tossing a grenade at the enemy hut as a last resort. 

We chose this level and section of the game for two reasons: 1) The GPU intensive glass shader we mentioned earlier intrigued us and slowed down even the fastest GPUs, and 2) the level had a lot of good combat which we were lacking from some of the other demos.  Once again, you can see how this demo is also typical of Half Life 2 gameplay. 

Once again, the standings remain virtually unchanged in this demo with the 9700 and 9600XT performing very well. The Radeon X300 and GeForce 6200 also perform very closely to one another here:

Half Life 2 AT_coast_12 Demo

In DX8 mode there's more of the same, the 5900XT does pretty well as does the age old GeForce4:

Half Life 2 AT_coast_12 Demo

Let’s go for a Drive In Jail, with Friends
Comments Locked

62 Comments

View All Comments

  • Lord Banshee - Monday, November 22, 2004 - link

    Sorry about above post,

    #50, i hope you are only takinf about nv3x and below core? the nv4x core is almost as good as the newest radeon in rendering dx9 games.

    On a side note does anybody care the reason why doom3 models and textures are as good as half-life2? One being the amount of GPU processing power the lighting system takes. And the special effects. I am sure if every body had a 6800 Ultra then ID would have made the textures in doom3 better and used more high polygon models.

    But in we all don't so they instead used alot of normal mapping(the future in gameing) and a brand new light system never seen in games before.

    But again you most see that the doom3 engine has the ability of using huge textures and models but it is game dependent. Not all games that will use this engine will have the same lighting effect and such, they might want to show off their texture skills, it is the game companies choice.

    What doom3 fails at is outdoor enviroments, this is where the Source engine has them good (so they say, i have yet to play half-life 2)

    But it looks like the Unreal3 engine will be the best of both worlds, but thats another 2 years most likly.
  • Lord Banshee - Monday, November 22, 2004 - link

  • nserra - Monday, November 22, 2004 - link

    #40 T8000 ???!?!

    So why 6600 and 6800 perform very well and 6200 so bad? Aren’t they all the same card? Your post is pointless.

    Luckily Valve was hacked?, are you kidding how many people including like my self buy a piece of crap like the 5600, that performs so bad no only on this game but many others. TOO BAD IT WAS HACKED!!!

    Sure any card plays it today like one year ago, but not the right way!!!!

    I don’t know but I bet when more DX9.0 games came out the difference between the Ati and nvidia will be bigger. Unless there will be an option to enable the fast FP16 mode providing lower image quality like Far Cry.
  • nserra - Monday, November 22, 2004 - link

    We all know that who bought the Ati 9xxx have done a better job than the ones who bought the FX5xxx series card.

    Now what about an 8500 vs GF3/4.
    And some 9000 card too?

    DX8.1 is different of DX8.0, I would like to know if the 8500/9000 was a better buy, but today over the geforce3/4.

    It’s really important since GFfx sucks today but not 2 years ago, who know what will happen 2 years from now with 9xxx and 6xxx.

    Why 6200 performs so badly, and 6600 and 6800 so good?
  • dderidex - Monday, November 22, 2004 - link

    FYI, the compare image on [L=this page]http://www.anandtech.com/video/showdoc.aspx?i=2281...[/L] for the water is all wrong. I don't know what they were using for the 'DX8' sample of the water reflection, but that's not what it looks like at all on a GeForce FX card. It looks virtually indistinguishable from the DX9 sample, only with noticeably less smooth transitions with the coastal terrain (not shown in that shot).

    Unless AT intentionally disabled world reflections when switching to DX8 mode? But, I have a hard time believing they would be so biased.
  • blckgrffn - Sunday, November 21, 2004 - link

    8500/9100 & 9000/9200 & fx5200/5700 Radeon 7000/7500 & GF3/GF2 benches please! There are a lot of these cards out there and I am curious!
  • TheRealSkywolf - Sunday, November 21, 2004 - link

    45, ati contributed with a big cut of the budget for half life 2. Thats why it got delayed 1 year.
    So it is blatant obbious that valve was told to not not make dx 9.0 work well for nvidia fx.
  • moletus - Sunday, November 21, 2004 - link

    #40, you are so wrong wrong and wrong again. What kinda idiot game developer woulnt code as good as possible, regards of who gave em what development money? There are plenty of nvidia cards out there and im quite sure they want to play HL2 too.

    It's all about making $$$, so...
  • Cybercat - Sunday, November 21, 2004 - link

    #40, not necessarily. The 6200 is typically found to perform close to the X300. Only a few times will it meet up with the X600 Pro's standards.

    http://anandtech.com/video/showdoc.aspx?i=2238&...
  • abakshi - Sunday, November 21, 2004 - link

    *other (not over lol)

Log in

Don't have an account? Sign up now