The Windows and Multithreading Problem (A Must Read)

Unfortunately, not everything is just as straightforward as installing Windows 10 and going off on a 128 thread adventure. Most home users that have Windows typically have versions of Windows 10 Home or Windows 10 Pro, which are both fairly ubiquitous even among workstation users. The problem that these operating systems have rears its ugly head when we go above 64 threads. Now to be clear, Microsoft never expected home (or even most workstations) systems to go above this amount, and to a certain extent they are correct.

Whenever Windows experiences more than 64 threads in a system, it separates those threads into processor groups. The way this is done is very rudimentary: of the enumerated cores and threads, the first 64 go into the first group, the second 64 go into the next group, and so on. This is most easily observed by going into task manager and trying to set the affinity of a particular program:

 

With our 64 core processor, when simultaneous multithreading is enabled, we get a system with 128 threads. This is split into two groups, as shown above.

When the system is in this mode, it becomes very tricky for most software to operate properly. When a program is launched, it will be pushed into one of the processor groups based on load – if one group is busy, the program will be spawned in the other. When the program is running inside the group, unless it is processor group aware, then it can only access other threads in the same group. This means that if a multi-threaded program can use 128 threads, if it isn’t built with processor groups in mind, then it might only spawn with access to 64.

If this sounds somewhat familiar, then you may have heard of NUMA, or non-uniform memory architecture. This occurs when the CPU cores in the system might have different latencies to main memory, such as within a dual socket system: it can be quick to access the memory directly attached to its own core, but it can be a lot slower if a core needs to access memory attached to the other physical CPU. Processor groups is one way around this, to stop threads jumping from CPU to CPU. The only issue here is that despite having 128 threads on the 3990X, it’s all one CPU!

In Windows 10 Pro, this becomes a problem. We can look directly at Task Manager:

Here we see all 64 cores and 128 threads being loaded up with an artificial load. The important number here though is the socket count. The system thinks that we have two sockets, just because we have a high number of threads in the system. This is a big pain, and the source of a lot of slowdowns in some benchmarks.

(Interestingly enough, Intel’s latest Xeon Phi chips with 72 lightweight cores and 4-way HT for 288 threads show up as five sockets. How’s that for pain!)

Of course, there is a simple solution to avoid all of this – disable simultaneous multithreading. This means we still have 64 cores but now there’s only one processor group.

We still have most of the performance on the chip (and we’ll see later in the benchmarks). However, some of the performance has been lost – if I wanted 64 threads, I’d save some money and get the 32-core! There seems to be no easy way around this.

But then we remember that there are different versions of Windows 10.


From Wikipedia

Microsoft at retail sells Windows 10 Home, Windows 10 Pro, Windows 10 Pro for Workstations, and we can also find keys for Windows 10 Enterprise for sale. Each of these, aside from the usual feature limitations based on the market, also have limitations on processor counts and sockets. In the diagram above, we can see where it says Windows 10 Home is limited to 64 cores (threads), whereas Pro/Education versions go up to 128, and then Workstation/Enterprise to 256. There’s also Windows Server.

Now the thing is, Workstation and Enterprise are built with multiple processor groups in mind, whereas Pro is not. This has comes through scheduler adjustments, which aren’t immediately apparent without digging deeper into the finer elements of the design. We saw significant differences in performance.

In order to see the differences, we did the following comparisons:

  • 3990X with 64 C / 128 T (SMT On), Win10 Pro vs Win10 Ent
  • Win 10 Pro with 3990X, SMT On vs SMT Off

This isn’t just a case of the effect SMT has on overall performance – the way the scheduler and the OS works to make cores available and distribute work are big factors.

3D Particle Movement v2.1

In 3DPM, with standard non-expert code, the difference between SMT on and off is 8.6%, however moving to Enterprise brings half of it back.

3D Particle Movement v2.1 (with AVX)

When we move to hand-tuned AVX code, the extra threads can be used and per-thread gets a 2x speed increase. Here the Enterprise version again gets a small lead over the Pro.

DigiCortex 1.20 (32k Neuron, 1.8B Synapse)

DigiCortex is a more memory bound benchmark, and we see here that disabling SMT scores a massive gain as it frees up CPU-to-memory communication. Enterprise claws back half that gain while keeping SMT enabled.

Agisoft Photoscan 1.3.3, Complex Test

Photoscan is a variable threaded test, but having SMT disabled gives the better performance with each thread having more resources on tap. Again, W10 Enterprise splits the difference between SMT off and on.

NAMD 2.31 Molecular Dynamics (ApoA1)

Our biggest difference was in our new NAMD testing. Here the code is AVX2 accelerated, and the difference to watch out for is with SMT On, going from W10 Pro to W10 Ent is a massive 8.3x speed up. In regular Pro, we noticed that when spawning 128 threads, they would only sit on 16 actual cores, or less than, with the other cores not being utilized. In SMT-Off mode, we saw more of the cores being used, but the score still seemed to be around the same as a 3950X. It wasn’t until we moved to W10 Enterprise that all the threads were actually being used.

Corona 1.3 Benchmark

On the opposite end of the scale, Corona can actually take advantage of different processor groups. We see the improvement moving from SMT off to SMT On, and then another small jump moving to Enterprise.

Blender 2.79b bmw27_cpu Benchmark

Similarly in our Blender test, having processor groups was no problem, and Enterprise gets a small jump.

POV-Ray 3.7.1 Benchmark

POV-Ray benefits from having SMT disabled, regardless of OS version.

Handbrake 1.1.0 - 1080p60 HEVC 3500 kbps Fast

Whereas Handbrake (due to AVX acceleration) gets a big uplift on Windows 10 Enterprise

What’s The Verdict?

From our multithreaded test data, there can only be two conclusions. One is to disable SMT, as it seems to get performance uplifts in most benchmarks, given that most benchmarks don’t understand what processor groups are. However, if you absolutely have to have SMT enabled, then don’t use normal Windows 10 Pro: use Pro for Workstations (or Enterprise) instead. At the end of the day, this is the catch in using hardware that's skirting the line of being enterprise-grade: it also skirts the line with triggering enterprise software licensing. Thankfully, workstation software that is outright licensed per core is still almost non-existent, unlike the server realm.

Ultimately this puts us in a bit of a quandary for our CPU-to-CPU comparisons on the following pages. Normally we run our CPUs on W10 Pro with SMT enabled, but it’s clear from these benchmarks that in every multithreaded scenario, we won’t get the best result. We may have to look at how we test processors >16 cores in the future, and run them on Windows 10 Enterprise. Over the following pages, we’ll include W10 Pro and W10 Enterprise data for completeness.

Frequency, Temperature, and Power AMD 3990X Against Prosumer CPUs
Comments Locked

279 Comments

View All Comments

  • extide - Friday, February 7, 2020 - link

    "All the Threadripper 3000 family CPUs support a total of 64 PCIe 4.0 lanes from the CPU, and another 24 from the chipset (however each of these use four of them to communicate with each other)."

    I thought they bumped the CPU <--> Chipset connection up to 8 lanes on this platform. Is that a typo or am I confused?
  • Slash3 - Friday, February 7, 2020 - link

    You are correct.
  • Valantar - Friday, February 7, 2020 - link

    Great review, love the broad perspective and testing across different OSes! An error though: "All the Threadripper 3000 family CPUs support a total of 64 PCIe 4.0 lanes from the CPU, and another 24 from the chipset (however each of these use four of them to communicate with each other" - this is wrong for TRX40; the CPU and chipset both have 8 PCIe lanes dedicated to communication that do not count in the total. Source: https://www.anandtech.com/show/15121/the-amd-trx40...
  • dwade123 - Friday, February 7, 2020 - link

    Terrible performance scaling from 32 cores to 64 cores. Even prosumers won’t benefit much from that many cores. And the price tag... Ouch. 3000 series will be the worse selling Threadripper easily.
  • RSAUser - Friday, February 7, 2020 - link

    Scaling looks pretty good, take the clock speed difference into account and a little bit extra fo thread spawning and control, and it looks like a good 80%+ scaling for most multi threaded tasks.
  • FunBunny2 - Friday, February 7, 2020 - link

    " games have not included software renderers for ~two decades."

    clearly, only those with embarrassingly parallel problems will benefit from these sorts of chips. and, by embarrassingly parallel one means intra-application, and not just lots o innterWeb sessions.
  • FunBunny2 - Friday, February 7, 2020 - link

    oops. not the right quote: "3000 series will be the worse selling Threadripper easily."
  • Kjella - Friday, February 7, 2020 - link

    Obviously this particular processor is a low volume product, but they needed a workstation platform between AM4 and Epyc and since it's a halo product of a server chip it probably didn't cost AMD much to add it to the lineup. The biggest clue is probably that there's no 3980X, they're not fleshing out the lineup just making one extreme processor for bragging rights.

    But I wouldn't underestimate the number of people who can say "You're paying me >$100k/year to do this, if I'm 5% more efficient with a $4k processor it's worth it". They exist even though they're obviously not a mass market it's not just to showboat. That's on top of the PR value.
  • FunBunny2 - Friday, February 7, 2020 - link

    "You're paying me >$100k/year to do this,"

    at some point even the self-absorbed CEO class will realize that lots of those folks are engaged in non-producing overhead tasks. somethings are just not worth the costs saved.
  • monkeydelmagico - Friday, February 7, 2020 - link

    I think it's really cool that Ian got to set the price on this chip. Kudos.

Log in

Don't have an account? Sign up now