Conclusion

SilverStone’s engineers designed the ST1200-PTS to appease a very specific market – builders who need a high-wattage power supply in a confined space. As a result, the ST1200-PTS is the only 1200W PSU that we know of that has a fully ATX compliant, 140 mm deep chassis. Although this may not be important for power users who often use large tower cases, it is of utmost importance to builders who are trying to assemble very powerful systems into very small ATX cases, such as top-tier living room gaming systems.

Dissecting the ST1200-PTS from an engineering standpoint, trying to fit more components into a smaller space is very possible – as we've seen first-hand – but not without some trade-offs. Components have become smaller and more efficient as technology advances, allowing engineers to build shorter and more powerful PSUs, however we're not yet at a point where it's possible to have such a powerful ATX-compliant PSU with all the bells and whistles installed into it, while still remaining cost-effective. As such, the ST1200-PTS is a relatively simple PSU, without fancy features – aesthetic or otherwise. Thankfully, the compromises that SilverStone had to make are not severe. The most apparent compromise from a user’s point of view is the simple cooling circuitry, with a standard 120 mm fan handling the thermal needs of the unit. A deeper analysis reveals less complex filtering circuitry, which is the cause of the unit’s relatively high voltage ripple figures.

The overall performance of the ST1200-PTS is acceptable. Although it definitely is no match for many other top-tier units of similar power output, it does not fall outside of the ATX design recommendations either. Power quality figures are passable – although the voltage ripple flirts with the design limit on the 3.3V and 12V lines when the unit is under maximum load, it never surpasses that limit regardless of the operating conditions, and the regulation of the voltage lines is excellent.

Despite the compact dimensions of the unit and the use of a 120 mm fan, internal temperatures are low and thermal degradation is very limited. The only truly negative performance aspect that we must address is the very high noise when the unit is heavily loaded, which will not bother gamers who use headphones or loud speakers but it would certainly be a problem for users that want or need a relatively quiet environment. Note that the ST1200-PTS is noisy only when it is heavily loaded, as there is not a single (rational) PC configuration that is going to have a power draw greater than 300 Watts while the system is idling.

Overall, we feel that SilverStone will have trouble competing against typical top tier >1 kW alternatives, as their performance generally is superior over one or more aspects. When the length of the PSU is not very limited, there are competitive products which are both cheaper and better performers. On the other hand, the ST1200-PTS is the only option for users who are limited to fully ATX compliant units and cannot use a PSU longer than 140 mm. If that is the case, then the ST1200-PTS is a power supply that will not disappoint as the heart of a powerful modern gaming system.

 
Hot Test Results (~45°C Ambient Temperature)
Comments Locked

22 Comments

View All Comments

  • RealBeast - Friday, October 11, 2019 - link

    I've used a lot of SilverStone smaller (450-550W) units in small builds and been very happy, but would be hard pressed not to opt for a larger case and go with a Seasonic in this range.
  • C@mM! - Friday, October 11, 2019 - link

    I had both the last 1200w & a 850w Platinum from Silverstone die on me, whilst I applaud the size, they really needed to up their game on the PSU before making it smaller again.
  • tygrus - Friday, October 11, 2019 - link

    It's like having a 600w PSU with turbo boost upto 1200w. A 900w version with a bit more free space & easier airflow would be better for some users. Future versions may improve efficiency so you can run at higher loads without the hairdryer noise.
  • The_Assimilator - Saturday, October 12, 2019 - link

    Since SLI and Crossfire are dead, the only people who care about PSUs able to supply over a KW are miners and extreme overclockers - neither of which have a use for mITX chassis. So, this is a product looking for a market, which is not exactly a formula for success.
  • PenGunn - Saturday, October 12, 2019 - link

    I made an account for this. You just get the Seasonic that fits your purpose, no need for heavy thinking. ;)
  • HardwareDufus - Sunday, October 13, 2019 - link

    I have built my own PCs for 30 years. I'm going to build the last one of my professional working career in the next 8-12 months. It will be built to last 5 years (my current I7-3770k, 16GB, 500GB rig has been in service since late 2012) and it will be substantial. However, it will not a power supply that cost much over $100.
  • Showtime - Tuesday, October 15, 2019 - link

    I don't see the point. Some people will buy this thinking 50% loads, and other bs. Truth is no real SFF build requires over 750 watts which will cover a 2080 Ti with a 200 watt CPU. No SLI builds that require SFX power supply. Maybe specialty applications, but I mostly see it going to people with too much money, and not enough knowledge.
  • umano - Tuesday, October 15, 2019 - link

    I am waiting for their 1000w sfx-L and I hope a dual gpu prosumer card that needs that power :)

Log in

Don't have an account? Sign up now