Burn Tests CDR Media

We use the following configuration to test our burners:

Albatron 865PE Pro II
Intel Pentium 4 2.4GHz 800FSB
2 x 512 DDR OCZ PC3200 EL
Maxtor 80GB 7200RPM 8MB PATA
Windows XP SP1

We are going to run this benchmark in the same manner in which we ran our Sony DRU-540A benchmarks. We first burn the media with the DVR-108D and then use Plextools v2.12 to test C1/C2/CU averages in a Plextor PX-712A. Good burns have low C1/C2 averages and are considered to be the most readable. We used Ahead Nero's CD-DVD Speed 3.12 for burn and read tests. We will also provide images of the PX-712A for reference (which we have retested with better firmware and media). The images below are Pioneer DVR-108D images and in some cases, hover over the image to see the PX-712A images.

Fujifilm CDR




Click to enlarge.




Click to enlarge.


Neither drive has any particular trouble writing to this disc. Below, we took the disc that we just created and read it back in PlexTools and CDSpeed.




Click to enlarge.



Although there are significant C1 errors, there are no C2 or unreadable sectors, and this burn is considered just perfect.

Imation CDR


Click to enlarge
Hold your mouse over for the PX-712A image.



Click to enlarge
Hold your mouse over for the PX-712A image.


Like Fujifilm, Imation media is one of the higher quality brands of media, which performed just as well - at least on the burn.




Click to enlarge.




Unfortunately, this burn did not go as well as some of the others. The disc is readable, but we probably will run into trouble if the quality gets much worse. On the Plextor, the burn failed a little after the 70min marker.

Features Burn Tests CDR Media (cont'd)
Comments Locked

36 Comments

View All Comments

  • KristopherKubicki - Tuesday, August 31, 2004 - link

    Degrador, fixed, thanks.

    Kristopher
  • Degrador - Tuesday, August 31, 2004 - link

    Bitsetting basically describes what type of disc it is (only matters for DVD+R(W) and DL discs). Having a drive able to let you set the bitsetting means you can write discs that seem to be DVD-ROM discs not writables, and so old dvd-players can handle them better.

    Another thing I noticed in the article, the image shows the Ritek R03 discs burnt at only 4X on the Pioneer, yet you say "Even at that ambitious burn ..." and "the Pioneer wins this bout both in speed and write quality". Wrong image link perhaps?
  • KristopherKubicki - Tuesday, August 31, 2004 - link

    saechaka: someone said a hacked 3500A firmware supports bitsetting. I think its a pretty moot issue nowadays but some people find it really important.

    Kristopher
  • saechaka - Tuesday, August 31, 2004 - link

    what's the significance of this bitsetting? and will the 3500a be able to utilize that feature? thanks
  • Degrador - Tuesday, August 31, 2004 - link

    Under the features table, you have the drive listed as writing DVD-RAM at 2X. This drive actually doesn't support writing DVD-RAM, only reading.

    Perhaps another thing of note is that the retail version has better noise management / control than the OEM version.

    Also, is there any chance of doing some benchmarks with the newly released 1.10 firmware?

    Thanks
  • Budman - Tuesday, August 31, 2004 - link

    Pioneer DVD burners Rule!!

Log in

Don't have an account? Sign up now