Test Results: Mushkin PC3200 Level II V2

To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration. We have included results for RCW-ET using the Radar benchmark.

Mushkin PC3200 Level II V2 (DDR400) - 2 x 512Mb Double-Bank
Speed Memory Timings & Voltage Quake3 fps Sandra UNBuffered Sandra Standard Buffered Super PI 2M places
(time in sec)
Wolfenstein - Radar - Enemy Territory
fps
400DDR
800FSB
2-2-2-5
2.5V
331.3 INT 2888
FLT 2940
INT 4516
FLT 4511
129 70.8
433DDR
866FSB
2-2-2-5
2.65V
358.7 INT 3124
FLT 3186
INT 4913
FLT 4906
119 77.0
466DDR
933FSB
2-2-3-5
2.75V
378.0 INT 3253
FLT 3308
INT 5226
FLT 5223
112 81.7
500DDR
1000FSB
2.5-3-4-7
2.85V
397.0 INT 3284
FLT 3327
INT 5498
FLT 5506
107 86.0

The test results indicate Mushkin selected chips for the best performance from DDR400 to DDR466, as the DDR466 timings with the Mushkin were better than any other Samsung-based memory. There was less attention to the top end on the Mushkin, as we could barely reach a stable DDR500 at more relaxed timings than the other Samsung-based memory.

Mushkin's approach is unique among the Samsung-based memory in the roundup. Those who care most about the performance in the range of DDR400 to DDR466 will be very happy that Mushkin has designed their DDR400 LII V2 for best performance in that most useful range.

Test Results: Kingston HyperX PC3200 Low-Latency Test Results: OCZ PC3200 Platinum Rev. 2
Comments Locked

47 Comments

View All Comments

  • leguman - Thursday, August 12, 2004 - link

    I got 3 Ballistix 512 MB PC3200 dimms.
    I have a chaintech VNF-250 board (socket 754), and according to Anandtech's test, it is the only mobo to be able to run 3 DIMMS flawlessly at the most aggressive timings.

    At 2.8V, 2-2-2 timings, max stable frequencies :
    - one does 223 Mhz
    - one does 218 Mhz
    - one does 212 Mhz. This one is not even stable at 200 Mhz @ 2.6V and is not stable at 220 Mhz even with 2.9V !!!

    I'm not very happy with these resuls as only 1 dimm is stable at 220 Mhz :(
  • Wesley Fink - Wednesday, August 11, 2004 - link

    #35 - Yes it is the same memory. Most SPD are programmed to work on the widest possible range of systems. The best timings for Intel are 2-2-2-5, while the best timings for AMD are 2-2-2-10. OCZ picked a number in the middle for tRAS at 2-2-2-8, but you can easily set 2-2-2-5 on Intel or 2-2-2-10 on AMD.
  • Resh - Monday, August 9, 2004 - link

    Just looked at the OCZ site and they now have PC3200 Platinum Rev 2 at 2-2-2-8!

    Is this the same stuff?

    http://www.ocztechnology.com/products/memory/OCZ_E...
  • tomati - Monday, August 9, 2004 - link

    Astonished crucial ,

    Didn't you make a mistake with the crucial reference module ?

    Is that really the pc 3200 you have tested ?, because I have seen on their european web site a pc 4000 ballistix module [url]http://www.crucial.com/eu/store/MPartspecs.Asp?mtb...[/url],then I wonder what's better choice pc 3200 or pc 4000?,

    So on thank for these kind of article ,

    kind regards ,

    tomati
  • Zebo - Friday, August 6, 2004 - link

    I don't understand these memory reviews or peoples comments. Never have.Obviously bandwidth is king (look at the benchmarks) and it's cheaper to get than LL.

    Get some super cheap hynix found on A-data or even value ram crank to 275 or 550DDR and it devistates these expensive modules.
  • 3Suns - Friday, August 6, 2004 - link

    Why do people equate 2-2-2-5 ratings with "2-2-2" ratings? Wouldn't real 2-2-2 memory run at CAS 2 for every single fetch? Isn't that vastly different from 2-2-2-5 which takes 5 cycles every 4th fetch?
  • eva2000 - Friday, August 6, 2004 - link

    would love to see Buffalo's PC3700 Micron 46v32m8 5B-C memory included in a part 2 review as well..
  • opuntia - Friday, August 6, 2004 - link

    I don't think the review mentions this, but the OCZ PC3200 Platinum Rev.2 is from OCZ's "Enhanced Latency Series" (1 of 5 different series) memory chips.

    I'm going to built my own PC and I just started looking at various sites like anandtech in order to gain some insight (which I have), but I get real confused sometimes when reviewed products are not named exactly like they would be on the manufacturers website, and when the review doesn't post a manufacturer's model/part number.

    Anyway, thanks for the great website. Now I just need to learn what exactly is latency and why 2-2-2 is so good.
  • pookie69 - Friday, August 6, 2004 - link

    A REALLY GOOD article.

    >>> much food for thought.

    I still cannot get over just how well these new PC3200 modules o/c! Why bother with any higher grades of mmeory at all?!

    Thanks Mister Wesley Fink for bringing yet another great comprehensive review our way. Your efforts, as always, are greatly appreciated!!! And your timing always seems to be spot on!! LOL. :)
  • CrimsonDeath - Friday, August 6, 2004 - link

    Hmm, no stock on crucial Ballistix in their european site. Darn good memory.

Log in

Don't have an account? Sign up now