Testing Results, Low Fan Speed

Using a PWM voltage regulator, we reduced the speed of the fans manually down to half their rated speed, which is 800 RPM. The pump was also connected on the same power source, functioning properly at this low speed setting.

Average Thermal Resistance

Core Temperature, Constant Thermal Load (Low Fan Speed)

The Corsair H150i Pro RGB is doing much better in this test, managing to almost match the thermal performance of larger (and much more expensive) liquid coolers. Both the low and high load thermal performance of the H150i Pro RGB are exceptional, outpacing most of the smaller AIO cooler implementations. The average thermal resistance is 0.0837 °C/W, hardly worse than the figures we recorded with the cooler's fans running at maximum speed.

Fan Speed (7 Volts)

Under these operating conditions, we recorded a sound pressure reading of just 33.1 dB(A), a very low figure for any kind of CPU cooler. The H150i Pro RGB will virtually be imperceptible with its fans running at 800 RPM inside a typical room. A slight humming sound will be perceptible in a quiet environment but its intensity is very low and certainly tolerable by even the most sensitive-eared users.

Noise level

Testing Results, Maximum Fan Speed Thermal Resistance VS Sound Pressure Level
Comments Locked

42 Comments

View All Comments

  • geoxile - Monday, May 27, 2019 - link

    How long are these tests run? Water takes time to stablize
  • Cableaddict - Friday, June 28, 2019 - link

    What I would love to see is a comparison of how much heat all these systems can dissipate, WHEN AT THE SAME NOISE LEVEL. For instance, if the AlphaCool had the same performance as the H150i, when it was dialed back to also give 39.2 dB, but then had the extra capacity if needed, it would be a no-brainer purchase.

Log in

Don't have an account? Sign up now